Taiyo-Yuden-FBMH2012HM121-T
| Part # | Taiyo-Yuden-FBMH2012HM121-T |
Download  | Taiyo-Yuden-FBMH2012HM121-T |
Notice for
T
A
IYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
Product Information in this Catalog
■
(4)
P
ower
generation control equipment (nuclear power,
hydroelectric power, thermal power plant control system, etc.)
(5) Undersea
equipment (submarine repeating equipment,
underwater work equipment, etc.)
(6) Military
equipment
(7) Any
other equipment requiring extremely high levels of safety
and/or reliability equal to the equipment listed above
Product information in this catalog is as of October 2019. All of the
contents specified herein and production status of the products listed
in this catalog are subject to change without notice due to technical
improvement of our products, etc.
Therefore, please check for the
latest information carefully before practical application or use of our
products.
Please note that TAIYO YUDEN shall not be in any way responsible
for any damages and defects in products or equipment incorporating
our products, which are caused under the conditions other than those
specified in this catalog or individual product specification sheets.
*Notes:
1.
T
here is a possibility that our products can be used only
for aviation equipment that does not directly affect the safe
operation of aircraft (e.g., in-flight entertainment, cabin
light, electric seat, cooking equipment) if such use meets
requirements specified separately by TAIYO YUDEN. Please
be sure to contact TAIYO YUDEN for further information
before using our products for such aviation equipment.
2. Implantable medical devices contain not only internal unit
which is implanted in a body, but also external unit which is
connected to the internal unit.
Approval of Product Specifications
■
Please contact TAIYO YUDEN for further details of product
specifications as the individual product specification sheets are
available. When using our products, please be sure to approve our
product specifications or make a written agreement on the product
specification with TAIYO YUDEN in advance.
Pre-Evaluation in the Actual Equipment and Conditions
Please conduct validation and verification of our products in actual
conditions of mounting and operating environment before using our
products.
4. Limitation
of Liability
■
■
Please note that unless you obtain prior written consent of TAIYO
YUDEN, TAIYO YUDEN shall not be in any way responsible for
any damages incurred by you or third parties arising from use of
the products listed in this catalog for any equipment that is not
intended for use by TAIYO YUDEN, or any equipment requiring
inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN
as described above.
Limited Application
1. Equipment
Intended for Use
The products listed in this catalog are intended for general-
purpose and standard use in general electronic equipment (e.g.,
AV equipment, OA equipment, home electric appliances, office
equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and other equipment
specified in this catalog or the individual product specification sheets.
Safety Design
■
When using our products for high safety and/or reliability-required
equipment or circuits, please fully perform safety and/or reliability
evaluation. In addition, please install (i) systems equipped with
a protection circuit and a protection device and/or (ii) systems
equipped with a redundant circuit or other system to prevent an
unsafe status in the event of a single fault for a failsafe design to
ensure safety.
TAIYO YUDEN has the line-up of the products intended for
use in automotive electronic equipment, telecommunications
infrastructure and industrial equipment, or medical devices
classified as GHTF Classes A to C (Japan Classes I to III).
Therefore, when using our products for these equipment,
please check available applications specified in this catalog
or the individual product specification sheets and use the
corresponding products.
Intellectual Property Rights
■
■
Information contained in this catalog is intended to convey examples
of typical performances and/or applications of our products and is
not intended to make any warranty with respect to the intellectual
property rights or any other related rights of TAIYO YUDEN or any
third parties nor grant any license under such rights.
2. Equipment
Requiring Inquiry
Please be sure to contact TAIYO YUDEN for further information
before using the products listed in this catalog for the following
equipment (excluding intended equipment as specified in this
catalog or the individual product specification sheets) which may
cause loss of human life, bodily injury, serious property damage
and/or serious public impact due to a failure or defect of the
products and/or malfunction attributed thereto.
(1) Transportation
equipment (automotive powertrain control
system, train control system, and ship control system, etc.)
(2) Traffic
signal equipment
Limited Warranty
Please note that the scope of warranty for our products is limited to
the delivered our products themselves and TAIYO YUDEN shall not
be in any way responsible for any damages resulting from a failure
or defect in our products. Notwithstanding the foregoing, if there is
a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company,
TAIYO YUDEN will warrant our products in accordance with such
agreement.
(3) Disaster
prevention equipment, crime prevention equipment
(4) Medical
devices classified as GHTF Class C (Japan Class III)
(5)
H
ighly public information network equipment, data-
processing equipment (telephone exchange, and base
station, etc.)
TAIYO YUDEN’s Official Sales Channel
■
■
The contents of this catalog are applicable to our products which are
purchased from our sales offices or authorized distributors (hereinafter
“
T
A
IYO YUDEN
’
s official sales channel
”
). Please note that the contents
of this catalog are not applicable to our products purchased from any
seller other than
T
A
IYO YUDEN
’
s official sales channel.
(6) Any
other equipment requiring high levels of quality and/or
reliability equal to the equipment listed above
3. Equipment
Prohibited for Use
Caution for Export
Please do not incorporate our products into the following
equipment requiring extremely high levels of safety and/or
reliability.
Some of our products listed in this catalog may require specific
procedures for export according t
o
“
U.S. Export Administration
Regulations
”
,
“
Foreign Exchange and Foreign Trade Control Law
”
of Japan, and other applicable regulations. Should you have any
questions on this matter, please contact our sales staff.
(1) Aerospace
equipment (artificial satellite, rocket, etc.)
(2) Aviation
equipment *
1
(3) Medical
devices classified as GHTF Class D (Japan Class IV),
implantable medical devices *
2
20
for General Electronic Equipment
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
WAVE
REFLOW
■
PARTS NUMBER
*Operating Temp. : -40～+125℃（Including self-generated heat）
△＝Blank space
F
B
△
M
J
3
2
1
6
H
S
8
0
0
－
⑦
T
△
⑨
①
②
③
④
⑤
⑥
⑧
①Series name
⑤Material
Code
HS
Code
FB
Series name
Ferrite bead
Material
Refer to impedance curves
for material differences
HM
②Shape
Code
M
HL
Shape
Rectangular chip
⑥Nominal impedance
Code
（example）
330
Nominal impedance［
Ω
］
③Characteristics
Code
Characteristics
Standard
33
J
221
220
H
High Impedance type
102
1000
④Dimensions（L×W）
Code
⑦Impedance tolerance
Dimensions
（L×W）［mm］
1.6×0.8
Code
－
Impedance tolerance
±25％
Type（inch）
1608
2125
2012
2016
3216
3225
4516
4525
4532
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
4532（1812）
N
±30％
2.0×1.25
⑧Packaging
2.0×1.6
3.2×1.6
3.2×2.5
4.5×1.6
4.5×2.5
4.5×3.2
Code
T
Packaging
Taping
⑨Internal code
Code
△
Internal code
Standard
■
STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Type
A
1.0
1.4
1.4
1.75
1.0
1.4
1.4
1.4
B
C
1.0
1.65
2.0
2.0
1.0
1.65
2.0
2.0
2.9
2.0
Recommended Land Patterns
Surface Mounting
FB MJ1608
FB MJ2125
FB MJ3216
FB MJ4516
FB MH1608
FB MH2012
FB MH2016
FB MH3216
FB MH3225
FB MH4516
FB MH4525
FB MH4532
1.0
1.2
2.2
3.5
1.0
1.2
1.2
2.2
2.2
3.5
3.5
3.5
・Mounting and soldering conditions should be
checked beforehand.
W
L
T
C
e
1.4
1.75
1.75
1.75
2.9
3.7
Unit：mm
A
B
A
Standard quantity [pcs]
Paper tape
Embossed tape
Type
L
W
T
e
FB MJ1608
（0603）
FB MJ2125
（0805）
FB MJ3216
（1206）
FB MJ4516
（1806）
FB MH1608
（0603）
FB MH2012
（0805）
FB MH2016
（0806）
FB MH3216
（1206）
FB MH3225
（1210）
FB MH4516
（1806）
FB MH4525
（1810）
FB MH4532
（1812）
1.6±0.2
（0.063±0.008）
2.0±0.2
0.8±0.2
（0.031±0.008）
1.25±0.2
0.8±0.2
（0.031±0.008）
0.85±0.2
（0.033±0.008）
1.1±0.2
0.3±0.2
（0.012±0.008）
0.5±0.3
4000
4000
－
－
－
（0.079±0.008）
（0.049±0.008）
（0.020±0.012）
3.2±0.3
（0.126±0.012）
4.5±0.3
1.6±0.2
（0.063±0.008）
1.6±0.2
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.3±0.15
（0.012±0.006）
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.5±0.3
2000
2000
－
（0.043±0.008）
1.1±0.2
（0.043±0.008）
0.8±0.1
（0.031±0.004）
0.85±0.2
（0.033±0.008）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
2.5±0.3
－
（0.177±0.012）
（0.063±0.008）
1.6±0.1
（0.063±0.004）
2.0±0.2
0.8±0.1
（0.031±0.004）
1.25±0.2
4000
4000
－
－
（0.079±0.008）
（0.049±0.008）
2.0±0.2
（0.079±0.008）
3.2±0.3
1.6±0.2
（0.063±0.008）
1.6±0.2
2000
2000
1000
2000
1000
－
（0.126±0.012）
（0.063±0.008）
（0.020±0.012）
3.2±0.3
（0.126±0.012）
4.5±0.3
2.5±0.3
（0.098±0.012）
1.6±0.2
0.5±0.3
（0.020±0.012）
0.5±0.3
－
（0.098±0.012）
1.6±0.2
（0.063±0.008）
2.5±0.3
（0.098±0.012）
3.2±0.3
（0.126±0.012）
－
（0.177±0.012）
（0.063±0.008）
（0.020±0.012）
4.5±0.4
（0.177±0.016）
4.5±0.4
2.5±0.3
（0.098±0.012）
3.2±0.3
0.9±0.6
（0.035±0.024）
0.9±0.6
－
－
2000
（0.177±0.016）
（0.126±0.012）
（0.035±0.024）
Unit：mm（inch）
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
119
for General Electronic Equipment
■
PARTS NUMBER
Standard type
●
FB MJ1608
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
28
23
±30％
±30％
100
100
FB MJ1608HS280NT
FB MJ1608HM230NT
RoHS
RoHS
0.007
0.007
4.0
4.0
0.8 ±0.2
0.8 ±0.2
●
FB MJ2125
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
25
42
21
33
8
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
FB MJ2125HS250NT
FB MJ2125HS420-T
FB MJ2125HM210NT
FB MJ2125HM330-T
FB MJ2125HL8R0NT
RoHS
RoHS
RoHS
RoHS
RoHS
0.004
0.008
0.004
0.008
0.008
6.0
4.0
6.0
4.0
4.0
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
●
FB MJ3216
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
48
80
38
60
16
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
FB MJ3216HS480NT
FB MJ3216HS800-T
FB MJ3216HM380NT
FB MJ3216HM600-T
FB MJ3216HL160NT
RoHS
RoHS
RoHS
RoHS
RoHS
0.005
0.010
0.005
0.010
0.012
6.0
4.0
6.0
4.0
4.0
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
●
FB MJ4516
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
72
110
56
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
FB MJ4516HS720NT
FB MJ4516HS111-T
FB MJ4516HM560NT
FB MJ4516HM900-T
FB MJ4516HL230NT
RoHS
RoHS
RoHS
RoHS
RoHS
0.007
0.014
0.007
0.014
0.014
6.0
4.0
6.0
4.0
3.5
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
90
23
High impedance type
●
FB MH1608
ＧＨz Band
EHS
Nominal impedance
Measuring frequency 100［MHz］
Nominal impedance
Measuring frequency 1［GHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
（Ω）
47
（Ω）
75
tolerance
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
tolerance
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
FB MH1608HM470-T
FB MH1608HM600-T
FB MH1608HM101-T
FB MH1608HM151-T
FB MH1608HM221-T
FB MH1608HM331-T
FB MH1608HM471-T
FB MH1608HM601-T
FB MH1608HM102-T
FB MH1608HL300-T
FB MH1608HL600-T
FB MH1608HL121-T
FB MH1608HL221-T
FB MH1608HL331-T
FB MH1608HL471-T
FB MH1608HL601-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.020
0.025
0.035
0.050
0.070
0.130
0.150
0.170
0.350
0.028
0.045
0.130
0.170
0.210
0.350
0.450
3.5
3.0
2.5
2.1
1.8
1.2
1.0
0.9
0.6
2.6
2.1
1.2
0.9
0.8
0.6
0.5
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
60
100
170
270
370
520
750
900
1200
120
220
540
950
1200
1500
1800
100
150
220
330
470
600
1000
30
60
120
220
330
470
600
High impedance type
●
FB MH2012
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
80
±25％
±25％
±25％
±25％
100
100
100
100
FB MH2012HM800-T
FB MH2012HM121-T
FB MH2012HM221-T
FB MH2012HM331-T
RoHS
RoHS
RoHS
RoHS
0.025
0.032
0.060
0.080
2.7
2.5
2.0
1.8
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
120
220
330
●
FB MH2016
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
120
250
±30％
±30％
100
100
FB MH2016HM121NT
FB MH2016HM251NT
RoHS
RoHS
0.015
0.050
4.5
2.0
1.6 ±0.2
1.6 ±0.2
●
FB MH3216
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
220
500
±30％
±30％
100
100
FB MH3216HM221NT
FB MH3216HM501NT
RoHS
RoHS
0.020
0.070
4.0
2.0
1.6 ±0.2
1.6 ±0.2
●
FB MH3225
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
600
1000
2000
±30％
±30％
±30％
100
100
100
FB MH3225HM601NT
FB MH3225HM102NT
FB MH3225HM202NT
RoHS
RoHS
RoHS
0.042
0.100
0.130
3.0
2.0
1.2
2.5 ±0.3
2.5 ±0.3
2.5 ±0.3
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
120
for General Electronic Equipment
■
PARTS NUMBER
●
FB MH4516
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
±30％
850
100
FB MH4516HM851NT
RoHS
0.100
1.5
1.6 ±0.2
●
FB MH4525
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
1000
1600
±30％
±30％
100
100
FB MH4525HM102NT
FB MH4525HM162NT
RoHS
RoHS
0.060
0.130
3.0
2.0
2.5 ±0.3
2.5 ±0.3
●
FB MH4532
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
680
1300
2000
±25％
±25％
±25％
100
100
100
FB MH4532HM681-T
FB MH4532HM132-T
FB MH4532HM202-T
RoHS
RoHS
RoHS
0.028
0.060
0.130
4.0
3.0
1.3
3.2 ±0.3
3.2 ±0.3
3.2 ±0.3
●
High current type
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
22
28
18
23
±30％
±30％
±30％
±30％
100
100
100
100
FB MJ1608HS220NTR
FB MJ1608HS280NTR
FB MJ1608HM180NTR
FB MJ1608HM230NTR
RoHS
RoHS
RoHS
RoHS
0.004
0.006
0.004
0.006
7.5
6.0
7.5
6.0
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
121
for General Electronic Equipment
■
ELECTRICAL CHARACTERISTICS
Standard type
■
FB MJ1608
■
FB MJ2125
FB MJ1608HS280NT
FB MJ1608HM230NT
FB MJ2125HS250NT
35
30
25
20
15
10
5
50
40
30
20
10
0
30
25
20
15
10
5
Z
Z
X
Z
R
R
R
X
X
0
0
1
1
1
1
1
10
100
1000
10000
10000
10000
10000
10000
1
1
1
1
1
10
100
1000
10000
10000
10000
10000
10000
1
1
1
1
1
10
100
1000
10000
10000
10000
10000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MJ2125HS420-T
FB MJ2125HM210NT
FB MJ2125HM330-T
50
40
30
20
10
0
50
40
30
20
10
0
70
60
50
40
30
20
10
0
Z
Z
Z
R
R
R
X
X
X
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MJ3216
FB MJ2125HL8R0NT
FB MJ3216HS480NT
FB MJ3216HS800-T
50
40
30
20
10
0
60
50
40
30
20
10
0
100
80
60
40
20
0
Z
Z
R
Z
R
R
X
X
X
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MJ3216HM380NT
FB MJ3216HM600-T
FB MJ3216HL160NT
80
70
60
50
40
30
20
10
0
120
100
80
60
40
20
0
100
80
60
40
20
0
Z
Z
R
Z
R
R
X
X
X
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MJ4516
FB MJ4516HS720NT
FB MJ4516HS111-T
FB MJ4516HM560NT
100
80
60
40
20
0
140
120
100
80
120
100
80
60
40
20
0
Z
Z
Z
R
R
R
60
40
X
X
X
20
0
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
122
for General Electronic Equipment
■
ELECTRICAL CHARACTERISTICS
FB MJ4516HM900-T
FB MJ4516HL230NT
160
140
120
100
80
140
120
100
80
Z
R
R
X
Z
60
60
40
40
X
20
20
0
0
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
High impedance type
ＧＨz Band
■
FB MH1608
FB MH1608HM470-T
FB MH1608HM600-T
FB MH1608HM101-T
80
70
60
50
40
30
20
10
0
120
100
80
60
40
20
0
200
150
100
50
Z
Z
Z
R
R
R
X
X
X
0
1
1
1
1
10
100
1000
10000
10000
10000
10000
1
1
1
1
10
100
1000
10000
10000
10000
10000
1
1
1
1
10
100
1000
10000
10000
10000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HM151-T
FB MH1608HM221-T
FB MH1608HM331-T
300
250
200
150
100
50
400
350
300
250
200
150
100
50
600
500
400
300
200
100
0
Z
Z
Z
R
R
R
X
X
X
0
0
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HM471-T
FB MH1608HM601-T
FB MH1608HM102-T
800
700
600
500
400
300
200
100
0
1000
800
600
400
200
0
1600
1400
1200
1000
800
600
400
200
0
Z
Z
Z
R
R
R
X
X
X
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HL121-T
FB MH1608HL300-T
FB MH1608HL600-T
200
150
100
50
350
300
250
200
150
100
50
700
600
500
400
300
200
100
0
Z
Z
R
X
Z
R
R
X
X
0
0
10
100
1000
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
123
for General Electronic Equipment
■
ELECTRICAL CHARACTERISTICS
FB MH1608HL221-T
FB MH1608HL331-T
FB MH1608HL471-T
1200
1000
800
600
400
200
0
1600
1400
1200
1000
800
600
400
200
0
2000
1500
1000
500
0
Z
Z
Z
R
R
R
X
X
X
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HL601-T
2500
2000
1500
1000
500
0
Z
R
X
1
10
100
1000
10000
Frequency[MHz]
High impedance type
■
FB MH2012
FB MH2012HM800-T
FB MH2012HM121-T
FB MH2012HM221-T
140
120
100
80
200
150
100
50
400
350
300
250
200
150
100
50
Z
Z
Z
R
R
R
60
40
20
X
X
X
0
1
0
0
10
100
1000
10000
10000
10000
1
1
1
10
100
1000
10000
10000
10000
1
1
1
10
100
1000
10000
10000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MH2016
FB MH2012HM331-T
FB MH2016HM121NT
FB MH2016HM251NT
600
500
400
300
200
100
200
400
350
300
250
200
150
100
50
Z
Z
150
100
50
Z
R
R
R
X
X
X
1000
0
1
0
0
10
100
1000
10
100
Frequency[MHz]
10
100
1000
Frequency[MHz]
Frequency[MHz]
■
FB MH3216
■
FB MH3225
FB MH3216HM221NT
FB MH3216HM501NT
FB MH3225HM601NT
350
300
250
200
150
100
50
800
700
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
Z
Z
R
Z
R
R
X
X
X
1000
0
1
10
100
Frequency[MHz]
10
100
1000
10
100
1000
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
124
for General Electronic Equipment
■
ELECTRICAL CHARACTERISTICS
■
FB MH4516
FB MH3225HM102NT
FB MH3225HM202NT
FB MH4516HM851NT
1200
1000
800
600
400
200
0
2500
2000
1500
1000
500
0
1400
1200
1000
800
600
400
200
0
Z
R
Z
Z
R
R
X
X
X
1
1
1
10
100
1000
10000
10000
10000
1
1
1
10
100
1000
10000
10000
10000
1
10
100
1000
10000
10000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MH4525
■
FB MH4532
FB MH4525HM102NT
FB MH4525HM162NT
FB MH4532HM681-T
1400
1200
1000
800
600
400
200
0
2000
1500
1000
500
0
1000
800
600
400
200
0
R
R
R
Z
Z
Z
X
X
X
10
100
1000
10
100
1000
1
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
High current type
FB MH4532HM132-T
FB MH4532HM202-T
FB MJ1608HS220NTR
1600
1400
1200
1000
800
600
400
200
0
2500
2000
1500
1000
500
0
30
25
20
15
10
5
R
Z
Z
Z
R
R
X
X
X
0
10
100
1000
10
100
1000
1
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MJ1608HS280NTR
FB MJ1608HM180NTR
FB MJ1608HM230NTR
35
30
25
20
15
10
5
40
35
30
25
20
15
10
5
50
40
30
20
10
0
Z
Z
Z
R
R
R
X
X
X
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
20
125
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE / T TYPE)
■
PACKAGING
①Minimum Quantity
Standard Quantity［pcs］
Type
Paper Tape
Embossed Tape
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
4532（1812）
4000
4000
4000
－
－
－
－
2000
2000
1000
2000
1000
2000
－
－
－
－
－
②Tape Material
●
Card board carrier tape
Top tape
Base tape
Chip Filled
Sprocket hole
Chip cavity
Bottom tape
Chip
●
Embossed tape
Top tape
Chip Filled
Sprocket hole
Chip cavity
Base tape
Chip
③Taping Dimensions
●
Paper tape (0.315 inches wide)
1.75±0.1
(0.069±0.004）
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
Sprocket hole
T
A
B
4.0±0.1
(0.157±0.004)
2.0±0.05
F
(0.079±0.002)
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E08R01
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type
A
B
FB MJ1608
FB MH1608
FB TH1608
（0603）
1.0±0.2
1.8±0.2
4.0±0.2
1.1max
（0.039±0.008）
（0.071±0.008）
（0.157±0.008）
（0.043max）
FB MJ2125
FB MH2012
（0805）
1.5±0.2
2.3±0.2
4.0±0.2
1.1max
（0.059±0.008）
（0.091±0.008）
（0.157±0.008）
（0.043max）
Unit : mm（inch）
●
Embossed tape (0.315 inches wide)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
1.75±0.1
(0.069±0.004）
Sprocket hole
A
B
4.0±0.1
(0.157±0.004)
2.0±0.05
F
(0.079±0.002)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FB MH2016
（0806）
1.8±0.2
2.2±0.2
（0.087±0.008）
3.5±0.2
4.0±0.2
2.6max
0.6max
（0.071±0.008）
1.9±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
1.5max
（0.024max）
0.3max
FB MJ3216
（1206）
（0.075±0.008）
1.9±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FB MH3216
（1206）
（0.075±0.008）
2.8±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FB MH3225
（1210）
（0.110±0.008）
（0.138±0.008）
（0.157±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
●
Embossed tape (0.472 inches wide)
φ1.5＋0.1/－0
1.75±0.1
(0.069±0.004）
(φ0.059＋0.004/-0)
Sprocket hole
T
A
B
K
F
4.0±0.1
(0.157±0.004)
2.0±0.05
(0.079±0.002)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FB MJ4516
（1806）
1.9±0.2
4.9±0.2
4.0±0.2
1.5max
0.3max
（0.075±0.008）
1.9±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FB MH4516
（1806）
（0.075±0.008）
2.9±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FB MH4525
（1810）
（0.114±0.008）
3.6±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
8.0±0.2
（0.157max）
4.0max
（0.024max）
0.6max
FB MH4532
（1812）
（0.142±0.008）
（0.193±0.008）
（0.315±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E08R01
④Leader and Blank portion
⑤Reel size
2.0±0.5
（0.079±0.020）
t
φ13.0±0.5
（φ0.512±0.020）
φD
φd
φ21.0±0.8
（φ0.827±0.031）
R1.0
W
Type
φD
φd
W
t
FB MJ1608
FB MJ2125
FB MJ3216
10.0±1.5
（0.394±0.059）
14.0±1.5
FB MJ4516
（0.551±0.059）
FB MH1608
FB MH2012
FB MH2016
FB MH3216
FB MH3225
FB MH4516
FB MH4525
180＋0/－3
60＋1/－0
2.5max
（7.09＋0/－0.118 ）
（2.36＋0.039/－0 ）
(0.098max)
10.0±1.5
（0.394±0.059）
14.0±1.5
（0.551±0.059）
14.0±2.0
330±2.0
（12.99±0.080）
180＋0/－3
100±1.0
（3.94±0.039）
60＋1/－0
3.0max
(1.181max)
2.5max
FB MH4532
FB TH1608
（0.551±0.080）
10.0±1.5
（7.09＋0/－0.118 ）
（2.36＋0.039/－0 ）
（0.394±0.059）
(0.098max)
Unit : mm（inch）
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E08R01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
■
RELIABILITY DATA
1. Operating Temperature Range
－40℃～＋125℃
Specified Value
Including self-generated heat
2. Storage Temperature Range
Specified Value
－40℃～＋85℃
Test Methods and
Remarks
*Note: -5
to ＋40℃ in
taped packaging
3. Impedance
Specified Value
Within the specified tolerance
Test Methods and
Measuring equipment
: Impedance analyzer (HP4291A) or its equivalent
: 100±1 MHz
Remarks
Measuring frequency
4. DC Resistance
Specified Value
Within the specified range
Test Methods and
Four-terminal method
Remarks
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value
Within the specified range
6. Vibration
Appearance
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
According to JIS C60068-2-6.
Vibration type
Test Methods and
Time
: A
: 2 hrs each in X,Y, and Z directions Total: 6 hrs
: 10 to 55 to 10Hz (/min.)
: 1.5 mm (shall not exceed acceleration 196m/s
2
)
Remarks
Frequency range
Amplitude
Mounting method
: Soldering onto PC board
7. Solderability
Specified Value
90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Solder temperature
Test Methods and
Immersion time
: 230±5℃
: 4±1 sec.
Remarks
Preconditioning
: Immersion into flux.
: 25mm/sec.
Immersion and Removal speed
8. Resistance to Soldering Heat
Appearance
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
Preheating
: 150℃
for 3 min.
Resistance to Soldering Heat
: 260±5℃
Test Methods and
Duration
: 10±0.5 sec.
Remarks
Preconditioning
: Immersion into flux.
Immersion and Removal speed
Recovery
: 25mm/sec.
: 2 to 3 hrs of recovery under the standard condition after the test.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E04R01
9. Thermal Shock
Specified Value
Appearance
: No significant abnormality
Impedance change
: Within＋50/－10% of the initial value
According to JIS C60068-2-14.
Conditions for 1 cycle
Step
Temperature (℃)
－40±3℃
Duration (min.)
30±3
1
2
3
4
Room Temperature
85±2℃
Within 3
30±3
Test Methods and
Remarks
Room Temperature
Within 3
Number of cycles
Mounting method
Recovery
: 100
: Soldering onto PC board
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Appearances
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
Temperature
: 40±2℃
Humidity
Test Methods and
Duration
: 90 to 95% RH
: 500＋24/－0
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Appearance
Specified Value
No significant abnormality
Impedance change
Within ±30% of the initial value
Temperature
Humidity
: 40±2℃
: 90 to 95%RH
Test Methods and
Applied current
: Rated current
Remarks
Duration
: 500＋24/－0 hrs
Mounting method
Recovery
: Soldering onto PC board
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
12. High Temperature Loading Test
Appearance
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
Temperature
: 85±2℃
Duration
Test Methods and
Applied current
: 500＋24/－0 hrs
: Rated current
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value
Appearance : No mechanical damage.
Warp :
2mm
Testing board
: Glass epoxy-resin substrate
Thickness :
0.8mm
Test Methods and
Remarks
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E04R01
14. Adhesion of Electrode
Specified Value
No separation or indication of separation of electrode.
Applied force
Duration
: 5N
: 10 sec.
Test Methods and
Remarks
Note on standard condition: “standard condition” referred to herein is defined as follows:
5 to 35℃
of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃
of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the “standard condition.”
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-E04R01
CHIP BEAD INDUCTORS FOR POWER LINE
（FB SERIES M TYPE）
■
PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
Precautions
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
◆Rated current
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in
case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating
conditions.
2. PCB Design
◆Land pattern design
Precautions
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, etc. sufficiently.
Precautions
◆Preheating when soldering
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron’s temperature – Below 350℃
Duration – 3 seconds or less
The soldering iron should not directly touch the inductor.
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
【Recommended reflow
condition】
Technical
considerations
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-E05R01
5. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at
screw part.
Precautions
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
Technical
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・Recommended conditions
Precautions
Ambient temperature -5～40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-E05R01
