TDK-KMZ1608SHR102ATD25
| Part # | TDK-KMZ1608SHR102ATD25 |
Download  | TDK-KMZ1608SHR102ATD25 |
E M C
C o m p o n e n t s
May 2018
Chip beads
For general signal line
Soft termination
KMZ-HR series (for automotive)
KMZ1608-H
R
type
KMZ1608-HR
1608[0603 inch]*
* Dimensions code JIS[EIA]
(2/11)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months.
Be sure to follow the storage conditions (
T
e
mperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifediv shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliabilit
y
,
o
r whose failure, malfunction or trouble could cause serious damage to
societ
y
,
p
erson or propert
y
.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2)
T
r
ansportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7)
T
r
ansportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(3/11)
E M C
C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Chip beads
For general signal line
Compatible with lead-free solders
AEC-Q200
Soft termination
Overview of
KMZ1608-HR
type
FEATURES
Noise reduction solution for general signal line.
Various frequency characteristics with 6 materials of different features for countermeasures against everything from general signals to
high-speed signals.
Guide electric property resin absorbs external stress, and mechanical stress, resistance force to thermal shock is improved.
Easing by conductive resin thermal stress, and respond for High-temperature environment of 150 °C, too.
APPLICATION
Various ECUs, powertrains, body controls, and car multimedia (telematics).
P
A
RT NUMBER CONSTRUCTION
KMZ
1608
B
HR
601
C
T
DH5
L×W×T dimensions
(mm)
Impedance
(
) at 100MHz
Material
name
Specifications
(Grade)
Characteristic
type
Internal
code
Series name
Packaging style
Soft
termination
1.6×0.8×0.6
1608
A
HR
601
102
600
C
T
T
a
ping
DH5
D25
1.6×0.8×0.8
B
D
R
S
Y
1000
A
B
OPERATING TEMPERATURE RANGE,
P
ACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature*
Type
(pieces/reel)
4,000
（
°C
）
（
°C
）
（
mg
）
t=0.6mm (DH5)
t=0.8mm (D25)
–55 to +150
–55 to +150
–55 to +150
–55 to +150
3
4
KMZ1608-HR
4,000
The storage temperature range is for after the circuit board is mounted.
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(4/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t:
Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s
T2
180°C
150°C
230°C
250 to 260°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(5/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
MATERIAL CHARACTERISTIC
B material:
This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling
requiring good waveform integrit
y
.
I
mpedance values selected for effectiveness at 10 to 200MHz.
S material:
Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material:
High frequency range type intended for the 100MHz region and above. For signal line applications in which the signal
frequency is far from the cutoff frequenc
y
.
I
mpedance values selected for effectiveness at 80 to 400MHz.
A material:
This high-impedance product is based on the impedance frequency characteristics of our
Y
–
material. The product offers
excellent impedance characteristics, which is greater than 2500
, in the vicinity of 100MHz range (KMZ1608AHR252B).
D material:
For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
2500
A
D
2000
Y
1500
1000
S
R
500
B
0
10
100
1000
Frequency(MHz)
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(6/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
SHAPE & DIMENSIONS
1.6 0.15
( )
Thickness T
0.6 0.15mm
0.8 0.15mm
0.3 0.2
Dimensions in mm
RECOMMENDED LAND
P
A
T
TERN
0.6
0.8
0.6
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(7/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFIC
A
T
ION TABLE
Rated current
Impedance
DC resistance
Thickness T
Part No.
[100MHz]
(
)
600
1000
60
Tolerance
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
25%
(
)max.
0.4
0.6
0.1
0.18
0.4
(mA)max.
500
300
800
500
500
400
500
500
400
500
500
500
500
400
300
200
500
400
300
(mm)
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.8
KMZ1608BHR601CTDH5
KMZ1608BHR102CTD25
KMZ1608RHR600
A
T
D25
KMZ1608RHR121
A
T
D25
KMZ1608RHR601
A
T
D25
KMZ1608RHR102
A
T
D25
KMZ1608SHR121
A
T
D25
KMZ1608SHR601
A
T
D25
KMZ1608SHR102
A
T
D25
KMZ1608YHR600BTD25
KMZ1608YHR121BTD25
KMZ1608YHR301BTD25
KMZ1608YHR601BTD25
KMZ1608YHR102BTD25
KMZ1608YHR152BTD25
KMZ1608AHR252BTD25
KMZ1608DHR500CTDH5
KMZ1608DHR121CTDH5
KMZ1608DHR241CTD25
120
600
1000
120
600
1000
60
120
300
600
1000
1500
2500
50
0.5
0.15
0.35
0.5
0.15
0.2
0.3
0.4
0.5
0.6
0.8
0.25
0.3
120
240
0.6
Please refer to the graph of rated current vs. temperature characteristics (derating) about the rating current at 125°C or more in temperature of the product.
○
Measurement equipment
Measurement item
Product No.
Manufacturer
Impedance
DC resistance
E4991A+16192A
T
y
pe-7556
Keysight
T
e
chnologies
Y
o
kogawa
＊
Equivalent measurement equipment may be used.
○
Rated current vs. temperature characteristics (derating)
900.0
8
00.0
700.0
600.0
500.0
400.0
3
00.0
200.0
100.0
0
–55
–25
5
3
5
65
95
125
150
(
)
Temper
a
t
u
re °C
RHR600A
YHR
3
01B, DHR500C
S
HR102A
RHR121A,
S
HR121A, YHR600B, YHR121B,
BHR601C, RHR601A,
S
HR601A, YHR601B
RHR102A, YHR102B, DHR121C
BHR102C, DHR241C
YHR152B
AHR252B
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(8/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
KMZ1608BHR series
KMZ1608RHR series
KMZ1608SHR series
1200
1100
1000
900
8
00
700
600
500
400
3
00
200
100
0
1200
1500
KMZ160
8
BHR601C
1100
KMZ160
8
RHR102A
1000
900
8
00
700
600
500
400
3
00
KMZ160
8S
HR102A
1000
500
0
KMZ160
8S
HR601A
KMZ160
8
RHR601A
KMZ160
8
RHR121A
KMZ160
8
BHR102C
200
100
0
KMZ160
8S
HR121A
KMZ160
8
RHR600A
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
)
10000
(
Fre
qu
ency MHz
(
(
Fre
qu
ency MHz
Fre
qu
ency MHz
KMZ1608YHR series
KMZ1608AHR series
KMZ1608DHR series
3
000
1
8
00
1500
KMZ160
8
YHR152B
1600
1400
1200
1000
8
00
600
400
200
0
KMZ160
8
YHR601B
KMZ160
8
YHR
3
01B
KMZ160
8
AHR252B
KMZ160
8
YHR102B
2500
2000
1500
1000
500
KMZ1608DHR241C
1000
KMZ160
8
YHR121B
KMZ160
8
YHR600B
KMZ1608DHR121C
500
KMZ1608DHR500C
0
0
1
10
100
1000
)
10000
1
10
100
1000
)
10000
1
10
100
1000
( )
Frequency MHz
10000
(
(
Fre
qu
ency MHz
Fre
qu
ency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(9/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
KMZ1608BHR601CTDH5
KMZ1608BHR102CTD25
KMZ1608RHR600ATD25
700
600
1200
1000
8
00
600
400
200
0
90
8
0
70
60
50
40
3
0
20
10
0
Z
500
400
3
00
200
100
0
Z
Z
R
R
R
X
(
X
X
1
10
100
1000
)
10000
1
10
100
1000
)
10000
10
100
1000
( )
Fre
qu
ency MHz
10000
(
Fre
qu
ency MHz
Fre
qu
ency MHz
KMZ1608RHR121
A
T
D25
KMZ1608RHR601ATD25
KMZ1608RHR102ATD25
700
600
500
1200
1000
140
120
100
8
00
600
400
200
0
Z
Z
Z
400
8
0
R
R
R
3
00
60
200
40
X
100
20
0
X
X
100
0
1
10
100
1000
)
10000
1
10
1000
)
10000
1
10
100
1000
)
10000
10000
10000
10000
(
(
(
Fre
qu
ency MHz
Fre
qu
ency MHz
Fre
qu
ency MHz
KMZ1608SHR121ATD25
KMZ1608SHR601
A
T
D25
KMZ1608SHR102ATD25
1
8
0
160
140
120
700
600
1400
1200
1000
500
Z
Z
Z
100
400
8
00
R
R
R
8
0
3
00
600
60
40
20
0
200
400
200
X
X
100
X
0
0
1
10
100
1000
)
1
10
100
1000
)
10000
10000
10000
1
10
100
1000
( )
Fre
qu
ency MHz
10000
10000
10000
(
Fre
qu
ency MHz
(
Fre
qu
ency MHz
KMZ1608YHR600BTD25
KMZ1608YHR121BTD25
KMZ1608YHR301BTD25
120
100
250
200
600
500
8
0
400
Z
Z
150
Z
60
40
20
0
3
00
R
R
100
50
0
R
200
X
X
100
0
X
1
10
100
1000
)
1
10
100
1000
)
1
10
100
1000
( )
Fre
qu
ency MHz
(
(
Fre
qu
ency MHz
Fre
qu
ency MHz
KMZ1608YHR601BTD25
KMZ1608YHR102BTD25
KMZ1608YHR152BTD25
1
8
00
1600
1400
1400
1200
1000
8
00
900
8
00
700
1200
1000
600
500
400
Z
Z
R
R
Z
R
8
00
600
400
200
0
600
400
200
0
3
00
200
100
0
X
(
X
X
1
10
100
1000
)
1
10
100
1000
)
1
10
100
1000
)
(
(
Fre
qu
ency MHz
Fre
qu
ency MHz
Fre
qu
ency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(10/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
KMZ1608AHR252BTD25
KMZ1608DHR500CTDH5
KMZ1608DHR121CTDH5
3
000
2500
2000
1500
1000
500
8
00
700
600
500
400
3
00
200
100
0
Z
R
Z
400
Z
3
00
200
100
0
X
X
R
X
100
R
0
1
10
1000
)
10000
1
10
100
1000
( )
Fre
qu
ency MHz
10000
1
10
100
1000
)
10000
(
(
Fre
qu
ency MHz
Fre
qu
ency MHz
KMZ1608DHR241CTD25
1200
1000
8
00
600
Z
400
200
R
X
0
1
10
100
1000
)
10000
(
Fre
qu
ency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
(11/11)
E M C
C o m p o n e n t s
KMZ1608-HR type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
1.
5
0
+0.1
2.0 0.05
4.0 0.1
A
P1
K
Dimensions in mm
K
T
y
pe
KMZ1608-HR
A
B
P1
4.0 0.1
1.1 0.2
1.9 0.2
1.1max.
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20180521 / beads_automotive_signal_kmz1608-hr_en.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TDK
:
