Sensata-Tech-ED10C5
| Part # | Sensata-Tech-ED10C5 |
Download  | Sensata-Tech-ED10C5 |
EMR plug in package
•
Ratings of 5 Amps
•
DC output Solid State Relay in an Industry standard
•
Load voltage range of 1-48 and 1-80 VDC
•
Fits standard DIN rail & PCB mountable sockets
•
LED input status indicator
•
AC or DC control
•
cUL Recognized, IEC Rated, CE & RoHS Compliant
•
Motor Controller Rated
PRODUCT SELECTION
Control Voltage
5-15 VDC Control
18-32 VDC Control
48-72 VDC Control
18-36 VAC Control
90-140 VAC Control
5 A
5 A
ED06D5
ED06C5
ED06F5
ED06E5
ED06B5
ED10D5
ED10C5
ED10F5
ED10E5
ED10B5
AVAILABLE OPTIONS
Operational Current
5:
5 Amps
Output Voltage
06:
1-48 VDC
10:
1-80 VDC
Series
ED
06
C
5
Control Voltage
B:
90-140 VAC
C:
18-32 VDC
D:
5-15 VDC
E:
18-36 VAC
F:
48-72 VDC
Required for valid part number
For options only and not required for valid part number
OUTPUT SPECIFICATIONS DC Output
(1)
Description
Operating Voltage [VDC]
(2)
Maximum Load Current, UL 508 Resistive,
[Adc]
Maximum Load Current, IEC 60947-4-1 DC-1, DC-3
[Adc, FLA]
Maximum Load Current UL 508 Motor Controller
[FLA]
(3)
Minimum Load Current [mAdc]
Maximum Off-State Leakage Current @ Rated Voltage [µA]
Maximum On-State Voltage Drop @ Rated Current and 40°C [Vdc]
Maximum Surge Current (10ms) [Adc]
5 A
1-48
5
5 A
1-80
5
5
5
2.0
2.5
20
0.3
60
2.0
2.5
20
0.3
60
Maximum PWM [Hz]
(4)
500
500
FDE-07-01 REV. A
INPUT SPECIFICATIONS
(1)
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off
Voltage
Maximum Reverse Voltage
Minimum Input Current [mA]
Maximum Input Current [mA]
Nominal Input Impedance [ohms]
Maximum Turn-On Time [msec]
(4)
Maximum Turn-Off Time [msec]
EDxxD5
5-15 VDC
5 VDC
1.3 VDC
3 VDC
11
42.8
350
0.6
0.3
EDxxC5
18-32 VDC
18 VDC
2 VDC
3 VDC
10.7
EDxxF5
48-72 VDC
48 VDC
4 VDC
3 VDC
10.8
EDxxE5
18-36 VAC
18 VAC
4 VAC
N/A
EDxxB5
90-140 VAC
90 VAC
11 VAC
N/A
12
7.3
19.7
16.3
25.3
10.9
1.6K
0.6
4.4K
0.6
1.5K
0.6
12.5K
0.6
0.3
0.3
0.3
0.3
GENERAL SPECIFICATIONS
(1)
Description
Parameters
Dielectric Strength,
Input/Output (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
2500 Vrms
9
10 Ohms
10 pF
-30ºC to 80ºC
-40ºC to 125ºC
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
0.71 oz. (30 g)
Maximum Humidity
Housing Material
Terminals Material
85% non-condensing
PBT 30% GF, UL94 V-0
Copper w/Sulfamet Nickel finish
GENERAL NOTES
1)
All parameters at 25°C unless otherwise specified.
2)
Maximum Rated voltage for ED06xx is 60 VDC and 100 VDC for ED10xx
3)
Maximum Motor Controller current is 1.5 FLA for EDxxB5 and EDxxE5
4)
PWM does not apply to EDxxB5 and EDxxE5
THERMAL DERATE INFORMATION
DERATING CURVE: EDxxx5
6.0
5.0
4.0
3.0
2.0
1.0
0
10
20
30
40
50
60
70
80
Ambient Temperature (ºC)
Above curve is based on a minimum spacing between parts of 16mm. Maximum current @ 0mm spacing is 3A.
Derating Value: ED06x5, D10x5 = 0.125A per mm
Derating based on Relay air gap:
Example: 10mm spacing with a ED06D5 SSR
1.- Subtract spacing from the minimum required spacing
of the part (16mm) to get the correction value.
16-10=6
2.- Multiply air gap derating value found above with correction value.
0.125 x 7 = 0.75A
Now using this final number we can figure out what the maximum current the relay can
carry with 10mm spacing @ 60°C Ambient.
3.- using the Ambient Derating Curve above find the current for the
5A model @ 60°C. In this case that calue is 2.5A.
4.- Subtract the value above (0.75A) from 2.5A.
2.5-0.75 = 1.75A
The maximum current you can switch with the ED06D5 with a 10mm air gap
between relays @ 60°C ambient is 1.75A
WIRING DIAGRAM
-V
DC
+V
DC
LOAD A
4
–
VDC
1/A1
Control
Circuit
+
5/A2
+
VDC
3+
LOAD B
LED
LOAD CAN BE WIRED IN POSITION A or B
MECHANICAL SPECIFICATIONS
DC Output: . Aꢃps
AC Control: B, E suffꢁx
1047
[3704]
DC Output: . Aꢃps
AC Control:
101±
[ꢀ709]
099
[ꢀ.0±]
C,D & F suffꢁx
08ꢀ
[ꢀ±08]
0ꢀ±
[.01]
0±ꢀ
[±0.]
0ꢀ4
[601]
019
[408]
0ꢀ1
[.03]
03±
[706]
01±
[ꢀ0.]
01ꢀ
[30±]
039
[909]
0.±
[1ꢀ07]
1014
[ꢀ90±]
Tolerances: ±±0±ꢀ ꢁn ꢂ ±0. ꢃꢃ
All dꢁꢃensꢁons are ꢁn: ꢁnches [ꢃꢁllꢁꢃeters]
ACCESSORIES
ED Series Accessories
DRSED
PCBSED
DIN Rail Mountable Socket
Part no.: DRSED
PC Board Mountable Socket
Part no.: PCBSED
Fingersafe IP10 DIN rail mountable socket to
mount ED series relays onto standard 35 mm
DIN rail. Rated at 250 V AC/DC, 12 Amps. The
DRSED includes M3 Combo screws.
PC Board mountable socket for ED series
relays. Rated at 250 V AC/DC, 12 Amps.
Suggested Pin-out hole diameter: 1.0 mm
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
IEC 61000-4-2 : Electrostatic Discharge
Level 1 – Criteria A
IEC 61000-4-4 : Electrically Fast Transients Level 2 – Criteria B
IEC 61000-4-5 : Electrical Surges
Level 3 – Criteria B
E116949
Rev. 081017
ECN 20296
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /
危险
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
RISQUE DE
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
存在电击、
爆炸或电弧
闪烁危险
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•
在操作此设
备之前请先
关闭电源。
•
Eteindre
toutes les
sources
d’énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
•
Spenga tutta
l’alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
•
Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
•
Disconnect all
power before
installing or
working with
this equipment.
•
Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
若不遵守这些说明，
可能会导致严重的
人身伤害甚至死亡。
con este equipo.
•
Verify all
connections
and replace all
covers before
turning on
Gerät Arbeiten
durchführen
apparecchiatura
•
Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
•
Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
•
Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
•
Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
power.
el equipo.
Failure to follow
these
instructions will
result in death
or serious injury.
dell’accensione
El
Abdeckungen
ersetzen.
L’omissione di
queste istruzioni
provocherà la
morte o
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
lesioni serie
Verletzungen
führen.
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /
警告
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
•
Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
•
Respecter les consignes de montage, et
notamment les couples de serrage.
•
Ne pas laisser pénétrer de liquide ni de corps
étrangers à l’intérieur du produit.
•
Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
•
Beachten Sie die Montageanweisungen,
•
Führen Sie keine Flüssigkeiten oder
•
The product’s side panels may be hot, allow
the product to cool before touching.
•
Follow proper mounting instructions including
torque values.
•
Do not allow liquids or foreign objects to enter
this product.
Fremdkörper in das Produkt ein.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
材料损坏和高温外壳的危险性
RISCHIO DI DANNI MATERIALI E D’INVOLUCRO
CALDO
•
产品的一侧面板可能很热，在其冷却前请
不要触碰。
•
遵照正确的安装说明，包括扭矩值。
•
请勿让液体及其他异物进入本产品。
•
Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
•
Respetar las instrucciones de montaje, y en
particular los pares de apretado.
•
I pannelli laterali dell’apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
•
Seguire le istruzioni di montaggio corrette.
•
Non far entrare liquidi o oggetti estranei in questo
apparecchio.
•
No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l’incolumità personale o
danni alle apparecchiature.
如不能正确执行这些操作说明，
极有可能造成严重人体伤害或者设备的损坏。
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
ANNEX – ENVIRONMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 – 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 – 2006,
电子信息产品污染控制标识要求。
部件
名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr (VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
半导体芯片
焊接点
50
