Antenova-SRFL029-200
| Part # | Antenova-SRFL029-200 |
Download  | Antenova-SRFL029-200 |
Moseni Antenna for LTE applications
Part No. SRFL029
flexiiANT
®
Product Specification
1. Features
Antenna for 4G LTE applications including MIMO systems.
LTE 700, GSM850, GSM900, DCS1800, PCS1900, WCDMA2100, LTE B7
(2500-2690 MHz), LTE B40 (2300
–
2400 MHZ)
1.13mm diameter RF cable with I-PEX MHF connector
Self-adhesive mounted
Quick and simple integration minimizes design cycle
Available in two standard cable lengths, 100mm and 150mm. Other lengths
are available.
2. Description
Moseni is intended for use with 4G LTE applications. This product specification
shows the performance of this antenna in all workable bands. Moseni offers easy
integration with plug and play simplicity.
3. Applications
Smart meters
Network devices
Femto / Pico base stations
Telematics
Remote monitoring
Machine to Machine
POS (Point of Sale) terminals
Antennas for Wireless Applications
Product Specification Moseni SRFL029-PS-1.
6
Page 1
Moseni
Part No. SRFL029
4. Part
Number
Moseni: SRFL029
5. General
Data
Product name
Part Number
Moseni
SRFL029
698-798MHz
824-960MHz
Frequency
1710-2170MHz
2300-2400MHz
2500-2690MHz
Polarization
Linear
Operating temperature
Environmental condition test
Impedance with matching
Weight
-40°C to +85°C
ISO 16750-4
5.1.1 / 5.1.2
50 Ω
< 0.5 g
Antenna type
FPC Self-adhesive 3M 468P
110.0 x 20.0 x 0.15 (mm)
I-PEX MHF1 (20278-112R-13)
Dimensions (Antenna)
Connection
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 2
Moseni
Part No. SRFL029
6. RF
Characteristics
698
–
798 MHz
824
–
960 MHz
3.50dBi
-1.70dBi
>60%
1710 – 2170 MHz
3.80dBi
Peak gain
3.50dBi
-1.60dBi
>60%
Average gain
-1.40dBi
>65%
Average efficiency
Maximum return loss
Maximum VSWR
-5.0dB
3.50:1
-8.0dB
-5.5dB
2.40:1
3.30:1
2300
–
2400 MHz
4.50dBi
2500
–
2690 MHz
4.60dBi
Peak gain
Average gain
-0.70dBi
>80%
-0.50dBi
>80%
Average efficiency
Maximum return loss
Maximum VSWR
-12dB
-16dB
1.40:1
1.70:1
All data
measured in a loaded condition adhered to a 1.6mm
thick plastic carrier free space.
An RF choke was used to prevent cable radiation.
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 3
Moseni
Part No. SRFL029
7. RF
Performance
7.1 Return Loss
[dB]
5
Atyune
0
1
5
-5
4
–
1
0
9
10
–
1
5
8
3
6
2
–
2
0
7
[MHz]
–
2
5
600 700 800 900
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800
MARKERS: MHz
dB
MHz
dB
MHz
dB
MHz
dB
MHz
dB
SRFL029.S1P – S11
1: 698
–
5
.24
2: 798
–
2
0.33
3: 824
–
1
6.12
4: 960
–
8
.00
5: 1710
–
5
.57
6: 2170
–
1
7.50
7: 2500
–
2
2.67
8: 2690
–
1
6.02
9: 2300
–
1
2.06
10: 2400
–
1
3.53
7.2 VSWR
[]
Atyune
10
9
8
7
6
5
4
1
5
3
4
2
1
9
10
3
2
8
6
7
[MHz]
600 700 800 900
1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800
MARKERS: MHz
SRFL029.S1P
MHz
MHz
MHz
MHz
–
S11
1: 698
2: 798
3.41
1.21
3: 824
4: 960
1.37
2.32
5: 1710
6: 2170
3.23
1.31
7: 2500
8: 2690
1.16
1.38
9: 2300
10: 2400
1.67
1.53
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 4
Moseni
Part No. SRFL029
7.3 Antenna patterns
7.3.1 698
MHz
–
798 MHz
dBi
3D pattern at 745 MHz
Drag to rotate pattern and PCB by using Adobe Reader
(Click to Activate)
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 5
Moseni
Part No. SRFL029
7.3.2
824 MHz
–
960 MHz
dBi
3D pattern at 890 MHz
Drag to rotate pattern and PCB by using Adobe Reader
(Click to Activate)
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 6
Moseni
Part No. SRFL029
7.3.3
1710 MHz
–
2170 MHz
dBi
3D pattern at 1990 MHz
Drag to rotate pattern and PCB by using Adobe Reader
(Click to Activate)
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 7
Moseni
Part No. SRFL029
7.3.4
2300 MHz
–
2400 MHz
dBi
3D pattern at 2350 MHz
Drag to rotate pattern and PCB by using Adobe Reader
(Click to Activate)
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 8
Moseni
Part No. SRFL029
7.3.5
2500 MHz
–
2690 MHz
dBi
3D pattern at 2600 MHz
Drag to rotate pattern and PCB by using Adobe Reader
(Click to Activate)
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 9
Moseni
Part No. SRFL029
8. Antenna
Dimensions
8.1 Dimensions FPC section
L
W
T
Length
Width
Thickness
110.0 ±0.2 (mm)
20.0 ±0.2 (mm)
0.15 (mm) nominal
All dimensions in mm
8.2 Dimensions assembled
L
SRFL029
-100
L
SRFL029
-150
L
Standard cable length for this
antenna (other lengths are
available, MOQs apply)
189 ±2.0 (mm)
239 ±2.0 (mm)
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 10
Moseni
Part No. SRFL029
8.3 I-PEX Connector MHF1 (20278-1121R-13)
I-PEX
Copper Alloy
Ag
Material
Plating
Front
Back
Side
5.0
2
.0
All dimensions in mm
8.4 Assembly
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 11
Moseni
Part No. SRFL029
9. Electrical
Interface
9.1 Host Interface
The host PCB requires the mating connector which is the I-PEX MHF (UFL)
receptacle. The location should be close to the chip/modules pin for the RF. Any
feed from this receptacle should be maintained at 50
Ω
impedance.
9.2 Transmission Line
All transmission lines should be designed to have a characteristic impe
dance of 50Ω.
• The length of the transmission lines should be kept to a minimum
• Any other parts of the RF system like transceivers, power amplifiers, etc, should
also be designed to have an impedance of 50 Ω
Once the material for the PCB has been chosen, (PCB thickness and dielectric
constant), a coplanar transmission line can easily be designed using any of the
commercial software packages for transmission line design. For the chosen PCB
thickness, copper thickness and substrate dielectric constant, the program will
calculate the appropriate transmission line width and gaps on either side of the feed.
A DC blocking capacitor should be placed in line to protect the RF front end.
10. Mechanical
Fixing
The antenna uses 3M 468MP adhesive on the reverse side of the FPC. The antenna
has an easy access split line to peel off to reveal the adhesive side. It is designed for
a one time fix to a clean smooth surface.
FPC back side
Split line for
easy peel
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 12
Moseni
Part No. SRFL029
10.0 Antenna Integration Guide
10.1 Placement
For placing the FPC antenna within a device, the host PCB size is not a factor like
with PCB mounted antennas. However the placement still needs to follow some
basic rules, as any antenna is sensitive to its environment.
Use six spatial directions, as shown below as a guide.
The antenna FPC section
should ideally maintain a minimum of three directions free from obstructions to be
able to operate effectively. The other directions will have obstacles in their paths –
these directions still require a minimum clearance. These minimum clearances are
further defined in this section. The plastic case is not included in this, only metal
objects/components that will obstruct or come in close proximity to the antenna.
Six spatial directions relative to FPC
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 13
Moseni
Part No. SRFL029
10.2 Orientation of FPC
The orientation of the FPC with respect to the host PCB should be defined
depending on the unit. The proximity of the GND will have an influence on the
antenna so the PCB location relative to the antenna should be considered.
The FPC will normally be placed in one of the three following options for orientation.
In each option a distance (d) is the critical dimension to consider. The diagram below
shows the minimum value of (d) for each. Other obstructions may increase this
dimension.
1) Vertical
mounted
FPC
Cable +Connector
d ≥ 3mm
PCB
2) Co-planar to PCB
d ≥ 15mm
3) Planar to PCB (Same plane)
d ≥ 3mm
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 14
Moseni
Part No. SRFL029
11. Hazardous
Material Regulation Conformance
The antenna has been tested to conform to RoHS requirements. A certificate of
conformance is available from Antenova’s website.
12. Packaging
The antennas are stored in individual plastic (PE) bags, and then stored within a
second bag of 100 pcs.
Single antenna per bag
100 units per second bag (Labelled)
12.1 Optimal Storage Conditions
Temperature
Humidity
-10ºC to 40ºC
Less than 75% RH
Shelf life
18 Months
Storage place
Away from corrosive gas and direct sunlight
Antennas
should be stored in unopened sealed manufacturer’s
plastic packaging.
Packaging
The shelf life of the antenna is 18 months, provided the bag of 100 pieces remains factory
sealed.
Antennas for Wireless Applications
Product Specification Moseni-SRFL029-PS-1.
6
Page 15
12.2 Label Information
Antennas for Wireless Applications
Product Specification Moseni SRFL029-PS-1.
6
Page 16
Quality statements
Antenova’s products conform to REACH and RoHS legislation. For our statements
Antenna design, integration and test resources
Product designers
–
the details contained in this datasheet will help you to complete
your embedded antenna design. Please follow our technical advice carefully to
obtain optimum antenna performance.
It is our goal that every customer will create a high performing wireless product using
Antenova’s antennas. You will find a wealth of design resources, calculators and
case studies to aid your design at our website.
Antenova’s design laboratories are equipped with the latest antenna design tools
and test chambers. We provide antenna design, test and technical integration
services to help you complete your design and obtain certifications.
If you cannot find the antenna you require in our product range, please contact us to
discuss creating a bespoke antenna to meet your requirement exactly.
Contacts
Join our online antenna design community:
ask.antenova.com
Global Headquarters:
Antenova Ltd, 2
nd
Floor Titan Court, 3 Bishop Square,
Hatfield, AL10 9NA
+44 (0) 1223 810600
Copyright
®
Antenova Ltd.
All Rights Reserved. Antenova
®
, gigaNOVA
®
, RADIONOVA
®
, the Antenova product
family names and the Antenova logos are trademarks and/or registered trademarks of Antenova Ltd. Any other
names and/or trademarks belong to their respective companies. The materials provided herein are believed to be
reliable and correct at the time of printing. Antenova does not warrant the accuracy or completeness of the
information, text, graphics or other items contained within this information. Antenova further assumes no
responsibility for the use of this information,
and all such information shall be entirely at the user’s risk.
Antennas for Wireless Applications
Product Specification Moseni SRFL029-PS-1.
6
released May 2016 updated
Nov
2019 Page
17
