ATC-AT0603T02ECAC7
| Part # | ATC-AT0603T02ECAC7 |
Download  | ATC-AT0603T02ECAC7 |
Thin Film RF Solutions – Attenuator
AT Series – 0603
GENERAL DESCRIPTION
KYOCERA AVX’s new PMC SMT Attenuator Series (AT) is manufactured with the highest quality materials for reliable and
repeatable performance. These devices are constructed with Aluminum Nitride (AIN) and are available in a standard EIA
0603 case size. The AT Series exhibits excellent performance characteristics for the most demanding PMC applications
The AT series provides virtually flat loss over a broad frequency spectrum. Thin film metalization provides for very
stable characteristics over temperature and time. Its balanced PI design provides even current distribution and accurate
attenuation characteristics from DC to 20 GHz. It is designed to meet a wide range of RF and microwave large and small
signal level applications. The AT is ideal for impedance matching, input padding, signal level runing, and many other
critical PMC applications. The AT is rated highest power in class and is suitable for microstrip and CPW applications.
The non-magnetic termination is available to provide bonding with conductive epoxies. The AT is fully compatible with
high speed automated pick-and-place processing.
Note: Consult Factory for other attenuation values, termination style and case sizes.
HOW TO ORDER
AT
0603
T
03
E
CA
T
D
Product Designation
Case Size
Quantity
D = 1000
B = 500
7 = 100
See mechanical dimensions below
Packaging
T = Tape & Reel: 7” Reel, 1000 pcs.
C = Cap Pack, 100 pcs.
Power Rating
T = 1 W (0 to 6 dB)
C = 3/4 W (7 to 10 dB)
Termination
CA = Non-Mag Gold
Attenuation
0 to 10 dB
Configuration
E = All Terminations wrapped and
patterned ground plane
The above part number refers to an AT 0603 Case Size with an attenuation of 3dB, 1W Power Rating, wrapped and
patterned ground plane configuration with Solderable Gold Termination and tape and reel packaging, 1000 pcs.
FEATURES
APPLICATIONS
•
•
•
•
•
•
Thin Film Design
•
•
•
•
•
•
•
Telecommunications
Satellite Communications
Cellular Base Stations
Microwave Radio
ISM
RF/Microwave Power
Military/Aerospace
•
•
•
•
•
Highest Power in Class
AIN construction
•
•
•
•
•
•
Test and Measurement
Impedance Matching
Input Padding
Signal Level Tuning
Signal Conditioning
MRI
Power Rating Up to 1 Watt
Frequency Response ±0.5dB
Characterized to 20 GHz
CPW and Microstrip Applications
EIA 0603 SMT
Balanced Pi design
Non-Magnetic Versions Available
RoHs compliant
AVAILABLE ATTENUATOR VALUES
Part Number
dB
Impedance
Frequency Range
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
DC – 20 Ghz
Power
Case Size
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
0603
AT0603T00ECATD
AT0603T01ECATD
AT0603T02ECATD
AT0603T03ECATD
AT0603T04ECATD
AT0603T05ECATD
AT0603T06ECATD
AT0603C07ECATD
AT0603C08ECATD
AT0603C09ECATD
AT0603C10ECATD
0
50
50
50
50
50
50
50
50
50
50
50
1
1
1
LEAD-FREE COMPATIBLE
COMPONENT
2
1
For RoHS compliant products, please
select correct termination style
3
1
4
1
5
1
6
1
7
0.75
0.75
0.75
0.75
8
9
10
Click on part number to see full specifications
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
12
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
Performance Data
RF/MICROWAVE ATTENUATOR TEST CONDITION DESCRIPTION
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center
trace (nominal 50-ohm characteristic impedance). Measurements were made using a four-receiver architecture. Measurements have
been de-embedded to the edges of the UUT using a standard TRL calibration procedure.
RF/MICROWAVE ATTENUATOR MODELED DATA DESCRIPTION
Models were simulated using Ansoft HFSS version 14 in a perfect 50 ohm environment with ideal ports placed at the edge of the
pads to ground. The boundary condition was set to be a radiating boundary in air.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
13
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T00ECATD – 0dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
00
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA – Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
25
46
LEAD-FREE COMPATIBLE
COMPONENT
31
4
GND
For RoHS compliant products, please
select correct termination style
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 0dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
14
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T01ECATD – 1dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
01
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
LEAD-FREE COMPATIBLE
COMPONENT
24
2
5 min
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 1dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
15
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T02ECATD – 2dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
02
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 2dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
16
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T03ECATD – 3dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
03
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 3dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
17
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T04ECATD – 4dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
04
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 4dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
18
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T05ECATD – 5dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
05
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 5dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
19
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603T06ECATD – 6dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
1W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
T
06
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
T = 1W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 6dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
20
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603C07ECATD – 7dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
3/4W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
C
07
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
C = 3/4W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
Measured 7dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
21
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603C08ECATD – 8dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
3/4W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
C
08
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
C = 3/4W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
LEAD-FREE COMPATIBLE
COMPONENT
24
2
5 min
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
20
2
Measured 8dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
22
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603C09ECATD – 9dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
3/4W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
C
09
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
C = 3/4W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
LEAD-FREE COMPATIBLE
COMPONENT
24
2
5 min
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
20
2
Measured 9dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
23
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
Thin Film RF Solutions – Attenuator
AT0603C10ECATD – 10dB
QUALIFICATION TEST SUMMARY
Input Power CW:
T
o
lerance (dB):
Resistors:
3/4W
D.C. to 10 GHz:±0.50 dB >10GHz: ±dB
Tantalum Nitride
Frequency Range:
DC to 20 GHz
1.25:1 Typical
50 Ohms
VSMR:
Terminal:
Thin Film Metalstack, Au
AIN
Nominal Impedance:
Operating Temperature:
Click here to go back to main table
Substrate Material:
Inspection:
-55°C to + 150°C
100% Per MIL-STD-883
HOW TO ORDER
AT
0603
C
10
E
CA
T
D
Product Designation
Quantity
D = 1000
B = 500
Case Size
See mechanical dimensions below
7 = 100
Power Rating
Packaging
C = 3/4W
T = Tape & Reel: 7″ Reel, 1000 pcs
C = Cap Pack, 100 pcs
Attenuation
Configuration
Termination
E = All Terminations wrapped and patterned ground planned
CA = Non-Mag Gold
MECHAINCAL DIMENSIONS
Dimensions are in mils, Bottom View
24
2
5 min
LEAD-FREE COMPATIBLE
COMPONENT
25
46
For RoHS compliant products, please
select correct termination style
31
4
GND
30
Via to Ground
63
4
30
53
20
2
*Data files contain DX
F
,
S
2
P
,
a
nd HFSS files
TDS-STFP-0001 | Rev 1
Measured 10dB Attenuator on Microstrip Board
0
-5
-10
-15
-20
-25
-30
-35
-40
0
2
4
6
8
10
12
14
16
18
20
Frequency [GHz]
Insertion Loss [S21]
Return Loss [S11]
All testing performed on 13.3-mil-thick Rogers RO4350 microstrip board, with the UUT subtending a 44 mil gap in 30 mil-wide center trace (nominal 50-ohm characteristic
impedance). Measurements were made using a four-receiver architecture. Measurements have been de-embedded to the edges of the UUT using a standard TRL calibration
procedure.
The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available
24
online at www.kyocera-avx.com/disclaimer/
by reference and should be reviewed in full before placing any order.
TDS-STFP-0001 | Rev 1
SPECIA
L
T
Y THIN FILM PRODUCTS
–
–
