Desco-81252

Electrical Properties:  

• Both

 

surfaces low-tribocharging at 50% RH  

4

6

• Conductive

 

grid layer 1 x 10

 

to < 1 x 10

 

ohms at 50% RH  

9

• Adhesive

 

copolymer resistivity 1 x 10

 

ohms (nominal) acrylic based adhesive  

• Copolymer

 

layer 8 x 10

 

ohms (nominal)  

12  

Physical Properties:  

• 1.9

 

mil (0.0019”), (0.049 mm) total thickness  

• No

 

silicone (adhesive, film backing, release material)  

• Max

 

Temperature 60°C (140°F)  

• Non-corrosive  

Property  

Test Method  

Value  

Tensile Strength – Longitudinal  

Tensile Strength – Transverse  

Elongation – Longitudinal  

Elongation – Transverse  

Static Decay Time  

ASTM D 882  

ASTM D 882  

ASTM D 882  

ASTM D 882  

FTMS 101B, M4046  

160 N/mm sq.  

270 N/mm sq.  

160%  

50%  

0.5 sec.  

Tape is wound on a paper core.  

Base Film Thickness  

Peeling Force  

Cohesion Force  

30 micron  

12 N  

12 hrs  

ANSI/ESD S20.20 requires that all nonessential insulators, such  

as those made of plastics and paper, must be removed from the  

workstation. Substituting ESD tape for regular tape (a very high  

tribocharging insulator) protects your ESD susceptible products.  

LCTS-T2-4  

LCTS-T3-4  

Adhesion to Steel  

0.300 kg/25mm min.  

Use and Storage:  

Width

– See Metric Note  

0.5″ .75″

 

1″  

Users shall determine the suitability of the product for its intended use.  

For best results, tape inventory should be continually replenished. It is  

recommended that rolls of tape be stored flat and rotated (flipped over to  

the other side) periodically. Tapes should be stored in a dry, well ventilated  

room with a reasonably consistent temperature of 68°F (20°C) and be  

protected from exposure to direct sunlight. Tape should not be stored in  

ultraviolet sunlight, moisture, or heat. Tape over one year old should be  

evaluated by the user to determine acceptability for the user’s application.  

Desco Industries, Inc. recommends those tracking useful life of product  

to use shipping/invoice date as Desco Industries, Inc. expressly warrants  

that for a period of one (1) year from the date of purchase, our Wescorp  

Brand ESD Tape will

(labor). See details of Limited Warranty online at

Tape  

2″  

Core  

Length  

Conductive Shielding Grid  

3″  

118 ft.  

Tape widths are nominal  

metric ±0.8 mm (±1/32″).  

RoHS 3, REACH, and Conflict Minerals Statement  

None of the RoHS 3 restricted hazardous substances, REACH  

substances of very high concern as of 2020/01/16, or Conflict  

Minerals are intentionally added in manufacturing this product.  

Ref: European Union Directive (EU) 2015/863 amending Annex  

II of the RoHS Directive 2011/65/EU, and Regulation (EC) No.  

1907/2006/CE.  

1/2″ is 12

 

mm nominal

 

or 0.472″  

3/4″ is 18

 

mm nominal

 

or 0.709″  

1″  

2″  

is 24

 

mm nominal

 

or 0.945″  

is 48

 

mm nominal

 

or 1.890″  

If not otherwise noted tolerance +/- 10%.  

*Wescorp is a Desco Industries brand.  

Note:

Tape rolls may vary slightly in color  

Specifications and procedures subject to change without notice.  

Made in Malaysia  

WESCORP* ESD CONDUCTIVE SHIELDING GRID TAPE, PAPER CORE  

DESCO WEST:

3651 WALNUT AVE., CHINO, CA 91710  

PHONE

: (909) 627-8178

 

WEB SITE

:

DATE:  

September  

2020  

DRAWING  

NUMBER:  

81250  

DESCO EAST:

ONE COLGATE WAY, CANTON, MA 02021-1407  

PHONE

: (781) 821-8370

 

WEB SITE

:

© 2020 DESCO INDUSTRIES INC  

Employee Owned