Finder-Relays–Inc–40-52-7-048-0001

Part #	Finder-Relays–Inc–40-52-7-048-0001
Download	Finder-Relays–Inc–40-52-7-048-0001

SЕRIES

Miniature PCB Relays

8 – 10 – 12 – 16 A

Medical and

dentistry

Control panels

Panels for electrical

distribution

Toys

Automation

for blinds,

grilles and

shutters

Door and

gate openers

Electronic

circuit boards

Vending

machines

Prices, features, speciﬁcations, capabilities, appearance and availability of our products and services are subject to change without notice.

FINDER assumes no responsibility for the presence of possible errors or insuﬃcient information in this document.

In case of discrepancies between the printed and online versions, the latter prevails.

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Power relays 1 and 2 pole for direct

PCB or

socket mount

40.31/51

40.52

40.61

Type 40.31/51

– 1

CO 12 A (3.5 mm pin pitch)

– 1

CO 12 A (5.0 mm pin pitch)

Type 40.52

– 2

CO 8 A (5.0 mm pin pitch)

Type 40.61

– 1

CO 16 A (5.0 mm pin pitch)

•

Pin length 3.5 mm for PCB mount

•

Pin length 5.3 mm for Plug-in mount

•

DC coils (650 mW or 500 mW) and AC coils

•

Cadmium-free contact material available

•

8 mm Creepage and Clearance, 6 kV (1.2/50µs)

between coil and contact

•

1 CO 12 A on PCB, 10 A with

socket

•

3.5 mm pin pitch (40.31),

5.0 mm pin pitch (40.51)

•

PCB or 95 Series socket mount

•

2 CO 8 A

•

5.0 mm pin pitch

•

PCB or 95 Series socket mount

•

PCB or 95 Series socket mount

•

1 CO 16 A

•

5.0 mm pin pitch

•

Meets EN 60335-1 glow wire requirements

•

95 series sockets for PCB or 35 mm rail

mounting (EN 60715) with Screw, Screwless or

Push-in terminals

•

Coil Indication and EMC suppression modules

99 series and Timer module 86.30 options

•

Environmental protection:

RT II – flux proof (Standard)

RT III – wash tight (Option)

40.31

* Mounted on sockets ≤ 10 A

** With the AgSnO

material the maximum peak

current on normally open contact, is 120 A – 5 ms

(for 40.61) and 60 A – 5 ms (for 40.52)

40.51

Copper side view

Pin length 5.3 mm for PCB or

sockets

Copper side view

ratings see

“

General technical information

”

page

Pin length 3.5 mm for PCB only

Pin length 5.3 mm for PCB or

sockets

Pin length 3.5 mm for PCB only

Pin length 5.3 mm for PCB or

sockets

See ordering information

For outline drawing see page 10

See ordering information

Contact specification

Contact configuration

1 CO (SPDT)

12*/20

2 CO (DPDT)

8/15**

1 CO (SPDT)

16/30**

Rated current/Maximum peak current

Rated voltage/

250/400

3000

250/400

2000

250/400

4000

Maximum switching voltage

V AC

Rated load AC1

Rated load AC15 (230 V AC)

Single phase motor rating (230 V AC)

Breaking capacity DC1: 24/110/220 V

Minimum switching load

Standard contact material

Coil specification

1000

750

1000

0.55

0.37

0.55

12/0.6/0.25

300 (5/5)

AgNi

8/0.6/0.25

300 (5/5)

AgNi

16/0.6/0.25

500 (10/5)

AgCdO

mW (V/mA)

Nominal voltage (U

)

V AC (50/60 Hz)

V DC

6 – 12 – 24 – 48 – 60 – 110 – 120 – 230 – 240

5 – 6 – 7 – 9 – 12 – 14 – 18 – 21 – 24 – 28 – 36 – 48 – 60 – 90 – 110 – 125

Rated power AC/DC/sensitive DC

VA (50 Hz)/W/W

1.2/0.65/0.5

(0.8…1.1)U

1.2/0.65/0.5

Operating range

DC/sensitive DC

AC/DC

(0.8…1.1)U

(0.73…1.5)U

/(0.73…1.5)U

0.8 U

/0.4 U

(0.8…1.1)U

(0.73…1.5)U

/(0.8…1.5)U

0.8 U

/0.4 U

(0.73…1.5)U

/(0.73…1.5)U

0.8 U

/0.4 U

Holding voltage

Must drop-out voltage

Technical data

Mechanical life

AC/DC

0.2 U

/0.1 U

0.2 U

/0.1 U

0.2 U

/0.1 U

cycles

10 · 10

200 · 10

10 · 10

100 · 10

10 · 10

100 · 10

Electrical life at rated load AC1

Operate/release time

7/3 (10/3 sensitive)

7/3 (12/4 sensitive)

7/3 (10/3 sensitive)

Insulation between coil

and contacts (1.2/50 µs)

6 (8 mm)

Dielectric strength

1000

–40…+85

RT II***

1000

–40…+85

RT II***

1000

–40…+85

RT II***

between open contacts

V AC

°C

Ambient temperature range

Environmental protection

Approvals

(according to type)

*** See general technical information “Guidelines for automatic flow solder processes

”

age

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Power relays 1 and 2 pole for direct PCB or

socket mount

40.62

40.xx.6

Type 40.62

– 2 CO

10A (5.0

mm pin pitch)

– DC coils (650 mW or 500 mW) and AC coils

– Meets EN 60335-1 glow wire requirements

Type 40.xx.6

– Bistable

versions of the types 40.31, 40.51,

40.52 and 40.61

– Bistable

(single coil)

•

2 CO 10 A

•

5.0 mm pin pitch

•

Bistable (single coil)

•

Cadmium-free contact material available

•

8 mm Creepage and Clearance, 6 kV (1.2/50µs)

between coil and contact

•

3.5 or 5.0 mm pin pitch

•

PCB or 95 Series sockets mount

•

PCB or 95 Series socket mount

•

95 series sockets for PCB or 35 mm rail mounting

(EN 60715) with Screw, Screwless or Push-in

terminals

Bistable version (1 coil) types:

•

Environmental protection:

40.31.6…

40.51.6…

40.52.6…

40.61.6…

RT II – flux proof (Standard)

RT III – wash tight (Option)

* With the AgSnO

material the maximum peak

current on normally open contact is

60 A – 5 ms (for 40.62)

Copper side view

For wiring diagrams see

page 10

ratings see

“

General technical information

”

page

Pin length 5.3 mm for

PCB or sockets

Pin length 5.3 mm for

PCB or sockets

For outline drawing see page 10

Contact specification

Contact configuration

2 CO (DPDT)

10/20*

Rated current/Maximum peak current

Rated voltage/

Maximum switching voltage

V AC

250/400

2500

See relays

40.31

Rated load AC1

Rated load AC15 (230 V AC)

Single phase motor rating (230 V AC)

Breaking capacity DC1: 24/110/220 V

Minimum switching load

Standard contact material

Coil specification

750

40.51

0.37

40.52

10/0.6/0.25

300 (5/5)

AgNi

40.61

mW (V/mA)

page 3

Nominal voltage (U

)

V AC (50/60 Hz)

110 – 120 – 230 – 240

5 – 6 – 12 – 24 – 48 – 110

5 – 6 – 7 – 9 – 12 – 14 – 18 – 21 – 24

– 28 – 48 – 60 – 110 – 125

V DC

VA (50 Hz)/W/W

Rated power AC/DC/sens. DC

Operating range

1.2/0.65/0.5

(0.8…1.1)U

1.0/1.0/—

(0.8…1.1)U

/ —

—

DC/sens. DC

AC/DC

(0.73…1.5)U

/ (0.73..1.5) U

0.8/0.4 U

Holding voltage

Must drop-out voltage

Technical data

AC/DC

0.2/0.1 U

—

Mechanical life

cycles

10 · 10

100 · 10

See relays

40.31

Electrical life at rated load AC1

Operate/release time

7/3 (12/4 sensitive)

40.51

Insulation between coil

and contacts (1.2/50 µs)

6 (8 mm)

40.52

Dielectric strength

between open contacts

V AC

°C

1000

–40…+85

RT II

40.61

Min. impulse duration

≥ 20 ms

Ambient temperature range

Environmental protection

Approvals

(according to type)

** See general technical information “Guidelines for automatic flow solder processes

”

age

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Ordering information

Example: 40 series PCB relay, 2 CO, 230 V AC coil.

4 0

. 5

2 . 8 . 2

3 0

. 0

Series

Type

Contact material

See table below

Special versions

0 = Standard

3 = PCB/Plug-in – 3.5 mm pinning

5 = PCB/Plug-in – 5 mm pinning

6 = PCB/Plug-in – 5 mm pinning

1 = Wash tight (RT III)

3 = High temperature (+125 °C) wash

tight

Contact circuit

0 = CO (nPDT)

3 = NO (nPST)

No. of poles

1 = 1 pole

2 = 2 pole

Options

0 = Pin length 5.3 mm (Plug-in relays)

2 = Pin length 3.5 mm (PCB relays)

Coil version

6 = AC/DC bistable

7 = Sensitive DC, 0.5 W

8 = AC (50/60 Hz)

9 = Standard DC, 0.65 W

Coil voltage

See coil specifications

Selecting features and options: only combinations in the same row are possible.

Preferred selections for best availability are shown in

bold.

Terminal pin

Type

Coil version

PCB relay,

pin length 3.5 mm

40.31/51

40.61

Standard DC/sensitive DC

AC/sensitive DC

Standard DC

(AgNi)

– 3

– 1

– 1 – 3

– 1

– 1 – 3

– 1

– 1 – 3

– 1

1 (AgNi) –

(AgCdO)

PCB/Plug-in relay

pin length 5.3 mm

40.31/51

40.52

(AgNi) – 2 (AgCdO) – 5 (AgNi+Au)

(AgNi) – 4 (AgSnO

) – 5 (AgNi+Au)

(AgNi) – 4 (AgSnO

) – 5 (AgNi+Au)

(AgCdO) – 4 (AgSnO

)

(AgCdO) – 4 (AgSnO

)

(AgNi) – 4 (AgSnO

)

AC/sensitive DC

Standard DC

40.52

40.61

AC/sensitive DC

Standard DC

40.61

40.62

AC/DC/sensitive DC

Bistable

40.31/51/52

40.61

(AgNi)

Bistable

(AgCdO)

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Technical data

Insulation according to EN 61810-1

1 pole

2 pole

Nominal voltage of supply system

Rated insulation voltage

Pollution degree

V AC

230/400

V AC

250

230/400

400

250

400

Insulation between coil and contact set

Type of insulation

Reinforced (8 mm)

Overvoltage category

III

Rated impulse voltage

kV (1.2/50 µs)

Dielectric strength

V AC

4000

Insulation between adjacent contacts (40.52)

Type of insulation

—

Basic

Overvoltage category

Rated impulse voltage

kV (1.2/50 µs)

V AC

2.5

Dielectric strength

2000

Insulation between adjacent contacts (40.52 + 40.62)

Type of insulation

—

Basic

III

Overvoltage category

Rated impulse voltage

kV (1.2/50 µs)

V AC

Dielectric strength

2500

Insulation between open contacts

Type of disconnection

Micro-disconnection

V AC/kV (1.2/50 µs)

1000/1.5

Micro-disconnection

1000/1.5

Dielectric strength

Insulation between coil terminals

Rated impulse voltage (surge) differential mode

(according to EN 61000-4-5)

kV (1.2/50 µs)

Other data

Bounce time: NO/NC

ms 2/5

Vibration resistance (10…150)Hz: NO/NC

Shock resistance NO/NC

20/5 (1 changeover)

15/4 (2 changeover)

20/12 (2 changeover)

20/13 (1 changeover)

0.65

Power lost to the environment

without contact current

with rated current

1.2 (40.31/51)

2 (40.61/52/62)

Recommended distance between relays mounted on PCB

mm ≥

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Contact specification

F 40.1 –

Electrical life (AC) v contact current

F 40.2 –

Electrical life (AC) v contact current

Types 40.31/51/61

Type 40.52

Resistive load – cosφ = 1

Inductive load AC15

Resistive load – cosφ = 1

Inductive load AC15

Limit for 40.31/51

F 40.6 – Electrical life (AC) v contact current

Type 40.62

Resistive load – cosφ = 1

Inductive load AC15

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Contact specification

H 40.1 – Maximum DC1 breaking capacity

H 40.6 – Maximum DC1 breaking capacity

Types 40.31/51/52/61

Type 40.62

40.61 current limit

40.31/51 current limit

40.52 current limit

2 contacts in series

40.52 – 2 contacts in series

single contact

DC voltage (V)

•

When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of ≥ 100 · 10

can be expected.

•

In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load.

Note: the release time for the load will be increased.

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Coil specifications

DC coil data – 0.65 W standard

(types 40.31/51/52/61/62)

DC coil data – 0.5 W sensitive

(types 40.31/51/52/61/62)

Nominal

voltage

Coil

code

Operating range

Rated coil

consumption

at U

Nominal

voltage

Coil

code

Operating range

Rated coil

Resistance

consumption

at U

min

max

min

max

Ω

.005

.006

.007

.009

.012

.014

.018

.021

.024

.028

.036

.048

.060

.090

.110

.125

3.65

4.4

7.5

130

109

.005

.006

.007

.009

.012

.014

.018

.021

.024

.028

.036

.048

.060

.090

.110

.125

3.7

4.4

7.5

100

5.1

10.5

13.5

5.1

10.5

13.5

100

6.6

125

220

300

500

700

900

1200

2000

3500

5500

12500

18000

23500

6.6

160

110

125

8.8

110

125

8.8

288

10.2

13.1

15.3

17.5

20.5

26.3

10.2

13.2

15.4

17.5

20.5

26.3

400

650

27.7

23.4

31.5

900

1150

1600

2600

4800

7200

16200

23500

32000

17.5

13.8

43.8

65.7

80.3

91.2

43.8

65.7

80.3

91.2

8.4

135

7.2

6.2

5.3

135

165

188

5.6

165

188

4.7

3.9

* U

min

= 0.8 U

for 40.61

AC coil data

(types 40.31/51/52/61/62)

AC/DC coil data – bistable

(types 40.31/51/52/61)

Nominal

voltage

Coil

code

Operating range

Rated coil

consumption

Operating range

Rated coil

consumption

Nominal Coil

voltage code

Resistance

DC: Release

resistance**

Resistance

min

max

at U

(50 Hz)

168

min

max

at U

215

165

Ω

.006

.012

.024

.048

.060

.110

.120

.230

.240

4.8

6.6

.005

.006

.012

.024

.048

.110

5.5

9.6

19.2

38.4

13.2

26.4

52.8

4.8

6.6

320

1350

2100

6900

9000

28000

31500

110

9.6

19.2

38.4

13.2

26.4

52.8

121

130

520

2100

11000

220

910

16.8

9.4

8.4

3,600

16,500

110

120

230

240

121

132

253

264

** R

Resistance in DC, R

= 1.3 x R

1 W

184

192

4.1

40 SERIES

PCB/Plug-in relays 8 – 10 – 12 – 16 A

SERIES

Coil specifications

R 40 – DC coil operating range v ambient temperature

Standard coil

Sensitive coil, types 40.31/51/52/61/62

40.61

40.31/51/52/62

R 40 – AC coil operating range v ambient temperature

1 –

Max. permitted coil voltage.

2 –

Min. pick-up voltage with coil at ambient temperature.

Wiring diagram for 40 series bistable coil version

AC Operation

DC Operation

On momentary closure of the SET switch the relay is magnetised through

On momentary closure of the SET switch the relay is magnetised and the

the diode and the relay contacts transfer to the set position and remain in

relay contacts transfer to the set position and remain in this position.

this position.

On momentary closure of the RESET switch the relay is demagnetised

through limiting resistor (R

) and the contacts return to the reset position.

through limiting resistor (R

) and the contacts return to the reset position.

Notes:

The minimum SET or RESET impulse time is 20 ms. The maximum time can be continuous. In practice, always ensure that the SET and RESET

contacts cannot be operated simultaneously.

Outline drawings

Types 40.31/51/52/61/62

* (3.5 or 5.3 mm) see ordering code

95 SERIES

Socket overview for 40 series relays

SERIES

Module Socket

Relay

Description

Mounting

Accessories

99.02

95.P3

95.P5

40.31

Push-in terminal sockets

–

For fast cable connection

–

Top terminals – Contacts

–

Bottom terminals – Coil

Panel or 35 mm rail

(EN 60715) mount

–

Coil indication and EMC

suppression modules

–

Jumper link

40.51

40.52

40.61

40.62

–

Timer modules

95.P5

–

Plastic retaining and release

clip

See page 12

Module Socket

Relay

Description

Mounting

Accessories

99.02

95.03

95.05

40.31

Screw terminal (Box clamp) socket

Panel or 35 mm rail

–

Coil indication and EMC

suppression modules

–

Jumper link

–

Top terminals – Contacts

(EN 60715) mount

40.51

40.52

40.61

40.62

–

Bottom terminals – Coil

–

Timer modules

95.05

–

Plastic retaining and release

clip

See page 14

Module Socket

Relay

Description

Mounting

Accessories

99.80 95.83.3

40.31

Screw terminal (Box clamp) socket

Panel or 35 mm rail

–

Coil indication and EMC

suppression modules

–

Jumper link

–

Plastic retaining and release

clip

–

Top terminals – NO and COM

Contacts

(EN 60715) mount

95.85.3

40.51

40.52

–

Bottom terminals – Coil and NC

Contacts

40.61

40.62

95.85.3

See page 15

Module Socket

Relay

Description

Mounting

Accessories

99.80 95.93.3

40.31

Screw terminal (Box clamp) socket

Panel or 35 mm rail

–

Coil indication and EMC

suppression modules

–

Jumper link

–

Plastic retaining and release

clip

–

Top terminals – Contacts

(EN 60715) mount

95.95.3

40.51

40.52

–

Bottom terminals – Coil

40.61

40.62

95.95.3

See page 16

Module Socket

Relay

Description

Mounting

Accessories

99.01 95.63

95.65

40.31

Screw terminal (Box clamp) socket

Panel or 35 mm rail

–

Metal retaining clip

–

Top terminals – Contacts

(EN 60715) mount

40.51

40.52

40.61

40.62

–

Bottom terminals – Coil

95.65

See page 17

Module Socket

Relay

Description

PCB socket

Mounting

Accessories

—

95.13.2

40.31

PCB mounting

–

Metal retaining clip

–

Plastic retaining clip

95.13.2

95.15.2

40.51

40.52

See page 18

40.61

40.62

95 SERIES

Socket and accessories for 40 series relays

SERIES

Push-in terminals socket

panel or 35 mm rail mount

For relay type

95.P3

40.31

95.P5

40.51, 40.52, 40.61, 40.62

Accessories

Metal retaining clip

095.71

Plastic retaining and release clip

(supplied with socket – packaging code SPA)

8-way jumper link

095.91.3

097.58

097.52

097.42

097.00

095.00.4

99.02

95.P5

Approvals

(according to type):

2-way jumper link (12.5 mm pitch)

2-way jumper link (4.6 mm pitch)

Marker tag holder (for tags 060.48 type)

Identification tag

Modules (see table below)

Timer modules (see table below)

Sheet of marker tags for plastic retaining and release clip

095.91.3 and for marker tag holder 097.00, 48 tags,

6 x 12 mm, for CEMBRE thermal transfert printer

Technical data

86.30

060.48

Rated values

10 A – 250 V*

6 kV

095.91.3

Dielectric strength between coil and contacts (1.2/50 μs)

Protection category

IP 20

Ambient temperature

°C –40…+70

(see diagram L95)

mm 10

Wire strip length

Min. wire size for 95.P3 and 95.P5 sockets

solid wire

0.5

stranded wire

0.5

AWG 21

060.48

Max. wire size for 95.P3 and 95.P5 sockets

solid wire

2 x 1.5 / 1 x 2.5

stranded wire

2 x 1.5 / 1 x 2.5

2 x 16 / 1 x 14

AWG 2

x 16 / 1 x 14

* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).

With the relay 40.51 the change-over contact will be 21-12-14.

L 95 – Total socket current v ambient temperature

COM

COIL

95.P3

95.P5

8-way jumper link

for 95.P3 and 95.P5 sockets

097.58

Rated values

10 A – 250 V

097.58

097.52

2-way jumper link

for 95.P3 and 95.P5 sockets

Rated values

097.52

10 A – 250 V

95 SERIES

Socket and accessories for 40 series relays

SERIES

2-way jumper link

for 95.P3 and 95.P5 sockets

097.42

Rated values

10 A – 250 V

097.42

Marker tag holder

for 95.P3 and 95.P5 sockets

097.00

86 series timer modules

(12…24)V AC/DC; Bi-function: AI, DI; (0.05 s…100 h)

(110…125)V AC; Bi-function: AI, DI; (0.05 s…100 h)

(230…240)V AC; Bi-function: AI, DI; (0.05 s…100 h)

86.30.0.024.0000

86.30.8.120.0000

86.30.8.240.0000

Approvals (according to type):

99.02 coil indication and EMC suppression modules

for 95.P3 and 95.P5 sockets

86.30

Diode (+A1, standard polarity)

(6…220)V DC

99.02.3.000.00

LED

(6…24)V DC/AC

99.02.0.024.59

(28…60)V DC/AC

99.02.0.060.59

(110…240)V DC/AC

99.02.0.230.59

(6…24)V DC

99.02.9.024.99

LED

LED + Diode (+A1, standard polarity)

LED + Varistor

99.02

Approvals

(according to type):

(28…60)V DC

99.02.9.060.99

(110…220)V DC

99.02.9.220.99

(6…24)V DC/AC

99.02.0.024.98

(28…60)V DC/AC

99.02.0.060.98

(110…240)V DC/AC

99.02.0.230.98

(6…24)V DC/AC

99.02.0.024.09

(28…60)V DC/AC

99.02.0.060.09

(110…240)V DC/AC

99.02.0.230.09

(110…240)V AC

99.02.8.230.07

LED + Varistor

DC Modules with

non-standard polarity

(+A2) on request.

RC circuit

Residual current by-pass*

* Additional 0.9 W power dissipation

95 SERIES

Socket and accessories for 40 series relays

SERIES

Screw terminal (Box clamp) socket

panel or 35 mm rail mount

95.03 (blue)

95.03.0 (black)

95.05 (blue)

95.05.0 (black)

For relay type

40.31

40.51, 40.52, 40.61, 40.62

Accessories

Metal retaining clip

095.71

Plastic retaining and release clip

(supplied with socket – packaging code SPA)

095.01

095.18

095.01.0

095.18.0

095.01

095.18

097.00

095.01.0

095.18.0

95.05

8-way jumper link

Approvals

(according to type):

Marker tag holder (for tags 060.48 type)

Identification tag

095.00.4

99.02

Modules (see table below)

Timer modules (see table below)

86.30

Sheet of marker tags for plastic retaining and release clip

095.01 and for marker tag holder 097.00, 48 tags, 6 x 12 mm,

for CEMBRE thermal transfer printers

Certain relay/socket

combinations

060.48

Technical data

Rated values

10 A – 250 V*

6 kV

Dielectric strength between coil and contacts (1.2/50 μs)

Protection category

IP 20

Ambient temperature

Screw torque

°C –40…+70

(see diagram L95)

Nm 0.5

095.01

Wire strip length

Max. wire size for 95.03 and 95.05 sockets

solid wire

1 x 6 / 2 x 2.5

stranded wire

1 x 4 / 2 x 2.5

1 x 12 / 2 x 14

AWG 1

x 10 / 2 x 14

060.48

* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).

With the relay 40.51 the change-over contact will be 21-12-14.

L 95 – Total socket current v ambient temperature

COM

COIL

95.03

95.05

8-way jumper link

for 95.03 and 95.05 sockets

Rated values

095.18 (blue)

10 A – 250 V

095.18.0 (black)

095.18

86 series timer modules

(12…24)V AC/DC; Bi-function: AI, DI; (0.05 s…100 h)

(110…125)V AC; Bi-function: AI, DI; (0.05 s…100 h)

(230…240)V AC; Bi-function: AI, DI; (0.05 s…100 h)

86.30.0.024.0000

86.30.8.120.0000

86.30.8.240.0000

86.30

Approvals (according to type):

99.02 coil indication and EMC suppression modules

for 95.03 and 95.05 sockets

Diode (+A1, standard polarity)

(6…220)V DC

99.02.3.000.00

LED

(6…24)V DC/AC

99.02.0.024.59

(28…60)V DC/AC

99.02.0.060.59

(110…240)V DC/AC

99.02.0.230.59

(6…24)V DC

99.02.9.024.99

LED + Diode (+A1, standard polarity)

LED + Varistor

RC circuit

Residual current by-pass*

* Additional 0.9 W power dissipation

99.02

(28…60)V DC

99.02.9.060.99

Approvals

(according to type):

(110…220)V DC

99.02.9.220.99

(6…24)V DC/AC

99.02.0.024.98

(28…60)V DC/AC

99.02.0.060.98

(110…240)V DC/AC

99.02.0.230.98

(6…24)V DC/AC

99.02.0.024.09

(28…60)V DC/AC

99.02.0.060.09

(110…240)V DC/AC

99.02.0.230.09

(110…240)V AC

99.02.8.230.07

DC Modules with

non-standard polarity

(+A2) on request.

95 SERIES

Socket and accessories for 40 series relays

SERIES

Screw terminal (Box clamp) socket panel

or 35 mm rail mount

95.83.3 (blue)

95.83.30 (black)

95.85.3 (blue)

95.85.30 (black)

For relay type

40.31

40.51, 40.52, 40.61, 40.62

Accessories

Metal retaining clip

095.71

Plastic retaining and release clip

(supplied with socket – packaging code SPA)

8-way jumper link

095.91.3

095.08

095.91.30

095.08.0

095.91.3

095.08

095.00.4

095.91.30

095.08.0

95.85.3

Identification tag

Approvals

Modules (see table below)

Marker tag holder

99.80

(according to type):

097.00

Sheet of marker tags for plastic retaining and release clip

095.91.3, 48 tags, 6 x 12 mm, for CEMBRE thermal transfert

printer

060.48

Technical data

Rated values

10 A – 250 V*

6 kV

095.91.3

Dielectric strength between coil and contacts (1.2/50 μs)

Protection category

2 kV

IP 20

Ambient temperature

°C –40…+70

(see diagram L95)

Screw torque

Nm 0.5

Wire strip length

Max. wire size for 95.83.3 and 95.85.3 sockets

solid wire

1 x 6 / 2 x 2.5

stranded wire

1 x 4 / 2 x 2.5

1 x 12 / 2 x 14

060.48

AWG 1

x 10 / 2 x 14

* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).

With the relay 40.51 the change-over contact will be 21-12-14.

L 95 – Total socket current v ambient temperature

95.83.3

95.85.3

8-way jumper link

for 95.83.3 and 95.85.3 sockets

Rated values

095.08 (blue)

10 A – 250 V

095.08.0 (black)

095.08

99.80 coil indication and EMC suppression modules

for 95.83.3 and 95.85.3 sockets

Blue*

Diode (+A1, standard polarity)

(6…220)V DC

99.80.3.000.00

LED

(6…24)V DC/AC

99.80.0.024.59

(28…60)V DC/AC

99.80.0.060.59

(110…240)V DC/AC

99.80.0.230.59

(6…24)V DC

99.80.9.024.99

LED

99.80

LED + Diode (+A1, standard polarity)

LED + Varistor

Approvals

(according to type):

(28…60)V DC

99.80.9.060.99

(110…220)V DC

99.80.9.220.99

(6…24)V DC/AC

99.80.0.024.98

(28…60)V DC/AC

99.80.0.060.98

(110…240)V DC/AC

99.80.0.230.98

(6…24)V DC/AC

99.80.0.024.09

(28…60)V DC/AC

99.80.0.060.09

(110…240)V DC/AC

99.80.0.230.09

(110…240)V AC

99.80.8.230.07

LED + Varistor

* Modules in Black

housing are available

on request.

LED + Varistor

RC circuit

Green LED is standard.

Red LED available on

request.

RC circuit

Residual current by-pass*

* Additional 0.9 W power dissipation

95 SERIES

Socket and accessories for 40 series relays

SERIES

Screw (Box clamp) terminal socket

panel or 35 mm rail mount

95.93.3 (blue)

95.93.30 (black)

95.95.3 (blue)

95.95.30 (black)

For relay type

40.31

40.51, 40.52, 40.61, 40.62

Accessories

Metal retaining clip

095.71

Plastic retaining and release clip

(supplied with socket – packaging code SPA)

8-way jumper link

095.91.3

095.08

095.91.30

095.08.0

095.91.3

095.08

095.00.4

095.91.30

095.08.0

95.95.3

Identification tag

Approvals

(according to type):

Modules (see table below)

Sheet of marker tags for plastic retaining and release clip

095.91.3 and for marker tag holder 097.00

, 48 tags,

6 x 12 mm, for CEMBRE thermal transfer printers

Technical data

99.80

060.48

Rated values

10 A – 250 V*

6 kV

Dielectric strength between coil and contacts (1.2/50 μs)

Protection category

IP 20

095.91.3

Ambient temperature

°C –40…+70

(see diagram L95)

Screw torque

Nm 0.5

Wire strip length

Max. wire size for 95.93.3 and 95.95.3 sockets

solid wire

1 x 6 / 2 x 2.5

stranded wire

1 x 4 / 2 x 2.5

1 x 12 / 2 x 14

AWG 1

x 10 / 2 x 14

060.48

* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).

With the relay 40.51 the change-over contact will be 21-12-14.

L 95 – Total socket current v ambient temperature

95.93.3

95.95.3

8-way jumper link

for 95.93.3 and 95.95.3 sockets

Rated values

095.08 (blue)

10 A – 250 V

095.08.0 (black)

095.08

99.80 coil indication and EMC suppression modules

for 95.93.3 and 95.95.3 sockets

Blue*

Diode (+A1, standard polarity)

(6…220)V DC

99.80.3.000.00

LED

(6…24)V DC/AC

99.80.0.024.59

(28…60)V DC/AC

99.80.0.060.59

(110…240)V DC/AC

99.80.0.230.59

(6…24)V DC

99.80.9.024.99

LED

99.80

LED + Diode (+A1, standard polarity)

LED + Varistor

Approvals

(according to type):

(28…60)V DC

99.80.9.060.99

(110…220)V DC

99.80.9.220.99

(6…24)V DC/AC

99.80.0.024.98

(28…60)V DC/AC

99.80.0.060.98

(110…240)V DC/AC

99.80.0.230.98

(6…24)V DC/AC

99.80.0.024.09

(28…60)V DC/AC

99.80.0.060.09

(110…240)V DC/AC

99.80.0.230.09

(110…240)V AC

99.80.8.230.07

LED + Varistor

* Modules in Black

housing are available

on request.

LED + Varistor

RC circuit

Green LED is standard.

Red LED available on

request.

RC circuit

Residual current by-pass*

* Additional 0.9 W power dissipation

95 SERIES

Socket and accessories for 40 series relays

SERIES

Screw terminal (Box clamp) socket

panel or 35 mm rail mount

95.63

95.65

For relay type

40.31

40.51, 40.52, 40.61, 40.62

Accessories

Metal retaining clip

095.71

8-way jumper link

095.08

99.01

095.08

—

95.63

Modules (see table below)

Technical data

Approvals

(according to type):

Rated values

10 A – 250 V*

Dielectric strength between coil and contacts (1.2/50 μs)

Protection category

6 kV

2 kV

IP 20

Ambient temperature

Screw torque

°C –40…+70

(see diagram L95)

Nm 0.5

Wire strip length

Max. wire size for 95.63 and 95.65 sockets

solid wire

stranded wire

1 x 4 / 2 x 2.5

1 x 12 / 2 x 14

1 x 6 / 2 x 2.5

AWG 1

x 10 / 2 x 14

95.65

* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).

With the relay 40.51 the change-over contact will be 21-12-14.

Approvals

(according to type):

L 95 – Total socket current v ambient temperature

95.63

95.65

8-way jumper link

for 95.63 and 95.65 sockets

Rated values

095.08 (blue)

10 A – 250 V

095.08

99.01 coil indication and EMC suppression modules

for type 95.63 socket

Blue*

Diode (+A1, standard polarity)

Diode (+A2, non-standard polarity)

LED

(6…220)V DC

99.01.3.000.00

(6…220)V DC

99.01.2.000.00

(6…24)V DC/AC

99.01.0.024.59

(28…60)V DC/AC

99.01.0.060.59

(110…240)V DC/AC

99.01.0.230.59

(6…24)V DC

99.01.9.024.99

LED

99.01

LED

Approvals

(according to type):

LED + Diode (+A1, standard polarity)

LED + Diode (+A2, non-standard polarity)

LED + Varistor

(28…60)V DC

99.01.9.060.99

(110…220)V DC

99.01.9.220.99

(6…24)V DC

99.01.9.024.79

* Modules in Black

housing are available

on request.

(28…60)V DC

99.01.9.060.79

(110…220)V DC

99.01.9.220.79

(6…24)V DC/AC

99.01.0.024.98

(28…60)V DC/AC

99.01.0.060.98

(110…240)V DC/AC

99.01.0.230.98

(6…24)V DC/AC

99.01.0.024.09

(28…60)V DC/AC

99.01.0.060.09

(110…240)V DC/AC

99.01.0.230.09

(110…240)V AC

99.01.8.230.07

Green LED is standard.

Red LED available on

request.

LED + Varistor

RC circuit

Residual current by-pass*

* Additional 0.9 W power dissipation

95 SERIES

Socket and accessories for 40 series relays

SERIES

PCB socket

For relay type

Accessories

95.13.2 (blue)

95.13.20 (black)

95.15.2 (blue)

95.15.20 (black)

40.31

40.51, 40.52, 40.61, 40.62

Metal retaining clip (supplied with socket –

packaging code SMA)

95.13.2

095.51

095.52

Plastic retaining clip

Technical data

Rated values

12 A – 250 V

10 A – 250 V*

Dielectric strength between coil and contacts (1.2/50 μs)

6 kV

95.15.2

Protection category

IP 20

Ambient temperature

°C –40…+70

Approvals

(according to type):

* For currents > 10 A, contact terminals must be connected in parallel (21 with 11, 24 with 14, 22 with 12).

With the relay 40.51 the change-over contact will be 21-12-14.

40.31

40.51

7.5

12 14 22 24

12 11 14

40.52

95.13.2

95.15.2

Copper side view

40.61

Packaging codes

How to code and identify retaining clip and packaging options for sockets.

Example:

9 5

. P

S P

Standard packaging

Metal retaining clip

Plastic retaining clip

Please see

general technical information

Finder-Relays–Inc–40-52-7-048-0001

Related Posts

CUI-CPE-171

DB-Unlimited-TP243408-1

DB-Unlimited-TE054003-2