FUJITSU-FBR582ND24-W
| Part # | FUJITSU-FBR582ND24-W |
Download  | FUJITSU-FBR582ND24-W |
COMPACT POWER RELAY
1 POLE x 2 – 12A
(28VDC)
(For 24V battery automotive applications)
FBR572, 582 Series
n
FEATURES
l
Two independent relays mounted in a single package
l
High current contact capacity
(carrying current: 40 A/2 minutes, 30 A/1 hour)
l
Suitable for controlling 24 V motors in trucks and other
large vehicles
l
High heat resistance and extended operating voltage
l
Two types of contact gap
(FBR572: 0.8 mm, FBR582: 1.4 mm)
l
RoHS compliant
Please see page 8 for more information
n
PARTNUMBER INFORMATION
FBR572
(a)
N
D24
(c)
–
W1
(d)
–
**
(e)
[Example]
(b)
(a)
Relay type
FBR572 :
FBR572 Series (contact gap 0.8mm)
FBR582 :
FBR582 Series (contact gap 1.4mm)
(b)
(c)
Enclosure
N
: Plastic sealed type
Coil rated voltage
Contact material
Specialꢀtypeꢀ
D24
: 24 VDC
Coil rating table at page 2
(d)
W1
Y
: Silver-tin oxide indium
: Silver-tin oxide
ꢀ (e)ꢀ
Toꢀbeꢀassignedꢀcustomꢀspecification
Actual marking does not carry the type name: “FBR”
E.g.: Ordering code: FBR572ND24-W1
Actual marking: 572ND24-W1
1
FBR572, 582 SERIES
n
SPECIFICATION
Item
FBR572
FBR582
Contact Data
Configuration
1 form C x 2 (SPDT x 2)
Silver-tin oxide indium (-W1 type)
Silver-tin oxide (-Y type)
Material
Voltage drop
Contact rating
Maximum 100 mV at 2A, 12VDC
28VDC, 12A (locked motor load)
28VDC, Inrush 15A, break 2.5A (motor free load)
40A/2 minutes, 30A/1 hour
(25 °C, 100% rated coil voltage)
Max. carrying current
Max. inrush current (reference)
Max. switching voltage (reference)
Max. switching current (reference)
Min. switching load (reference) *
Mechanical
60A
28VDC
32VDC
14A
12A
6 VDC, 1A
Min. 10 x 10
6
operations
Life
Min. 1 x 10
6
operations
Min. 100 x 10
3
operations
(locked motor load)
Min. 100 x 10
3
operations
(locked motor load)
Electrical
Min. 500 x 10
3
operations
(motor free load)
Coil Data
Operating temperature range
Storage temperature range
-40 °C to +85 °C (no frost)
-40 °C to +100 °C (no frost)
Max. 10 ms
Timing Data
Operate (at nominal voltage)
Release (at nominal voltage)
Max. 5
ms
Other
Vibration resistance
10 to 55Hz double amplitude 1.5mm
100m/s²
Misoperation
Endurance
Shock
1,000m/s²
Weight
Approximately18 g
*ꢀMinimumꢀswitchingꢀloadsꢀmentionedꢀaboveꢀareꢀreferenceꢀvalues.ꢀPleaseꢀperformꢀtheꢀconfirmationꢀtestꢀwithꢀactual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
n
COIL RATING
Thermal
resistance
(°C / W)
Coil
Code
Rated Coil
Voltage (VDC)
Must Operate Voltage
(VDC) *
Series
Coil Resistance +/- 10% (Ohm)
FBR572
FBR582
384
170
14.4 (at 20 °C)
18 (at 85 °C)
67
56
D24
24
Note: All values in the table are valid for 20°C and zero contact current, unless otherwise stated.
*ꢀSpecifiedꢀoperateꢀvaluesꢀareꢀvalidꢀforꢀpulseꢀwaveꢀvoltage.ꢀ
2
FBR572, 582 SERIES
n
PRINCIPAL APPLICATIONS
Recommended
Life x 10
3
Application
Normal load current
model (Example)
Power window
10A to 12A (switching at motor locking)
5A/2 door (switching at motor locking)
100
100
FBR582ND24-W1
FBR572ND24-W1
Automatic door lock
n
CHARACTERISTIC DATA
3
FBR572, 582 SERIES
Life test (example)
(1) Motor lock
Test item
Test circuit
Current wave form
12A, 28VDC
Motor lock
100,000 operations minimun
Contact material:
Silver tin oxide indium
(2) Motor free
Test item
Test circuit
Current wave form
Inrush 15A, Idle 2.5A
28VDC
Motor free
500,000 operations minimum
Contact material:
Silver tin oxide indium
4
FBR572, 582 SERIES
5
FBR572, 582 SERIES
n
DIMENSIONS
FBR572
l
Schematics
l
Dimensions
(BOTTOM VIEW)
l
PC board mounting
hole layout
(BOTTOM VIEW)
l
Tube carrier
Unit: mm
6
FBR572, 582 SERIES
n
DIMENSIONS
FBR582
l
Schematics
l
Dimensions
(BOTTOM VIEW)
l
PC board mounting
hole layout
(BOTTOM VIEW)
l
Tube carrier
Unit: mm
7
FBR572, 582 SERIES
RoHS Compliance and Lead Free Information
1. General Information
l
l
l
l
All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including
amendments.
Cadmium as used in electrical contacts is exempted from the RoHS directives.
As per Annex III of directive 2011/65/EU.
All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Condition
l
Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating:ꢀ
Soldering:
maximumꢀ120˚C
dip within 5 sec. at
260˚Cꢀsolderꢀbath
ꢀ
ꢀ
Solder by Soldering Iron:
Soldering Iron
Temperature:ꢀ maximumꢀ360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
8
FBR572, 582 SERIES
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Tel: (31-23) 5560910
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
Sunnyvale, CA
94089 U.S.A.
Tel: (1-408) 745-4900
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: components@us.fujitsu.com
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
©2013 Fujitsu Components Europe B.V.
All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
FujitsuꢀComponentsꢀEuropeꢀB.V.ꢀandꢀaffiliatedꢀcompaniesꢀdoꢀhoweverꢀnotꢀacceptꢀanyꢀresponsibilityꢀorꢀliabilityꢀonꢀtheirꢀbehalf,ꢀnorꢀonꢀbehalfꢀofꢀitsꢀ
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
NorꢀdoꢀFujitsuꢀComponentsꢀEuropeꢀB.V.ꢀandꢀaffiliatedꢀcompaniesꢀacceptꢀonꢀtheirꢀbehalf,ꢀnorꢀonꢀbehalfꢀofꢀitsꢀemployees,ꢀanyꢀresponsibilityꢀorꢀliabilityꢀ
forꢀanyꢀrepresentationꢀorꢀwarrantꢀofꢀanyꢀkind,ꢀexpressꢀorꢀimplied,ꢀincludingꢀwarrantiesꢀofꢀanyꢀkindꢀforꢀmerchantabilityꢀorꢀfitnessꢀforꢀparticularꢀuse,ꢀ
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
usefulness, availability and completeness thereof. Rev. July 03, 2013
9
