FUJITSU-FTR-K1AK024T
| Part # | FUJITSU-FTR-K1AK024T |
Download  | FUJITSU-FTR-K1AK024T |
FTR-K1 HIGH CAPACITY 20A TYPE
1 POLE – Power Relay
FTR-K1 Series
■
FEATURES
•
High capacity 20A (1 form A type)
•
Low profile (height: 15.7mm)
•
High insulation.
•
•
•
Insulation distance: min. 10mm between coil and contact.
Dielectric strength: 5,000VAC.
Surge strength: 10,000V.
•
Class F coil wire
•
Low coil power (Approx. 400mW)
•
Safety standards: UL
•
Flux proof, RT II
•
RoHS compliant
■
Applications
•
Oven controls
•
Electric heating controls
•
Power supplies
•
Air conditioning
■
Part Numbers
[Example] FTR-K1
A
K
012
W
–
HC
(a)
(b)
(c)
(d)
(e)
(f)
(a)
(b)
(c)
Relay type
FTR-K1 :
FTR-K1 series
Contact configuration
Coil type
A
: 1 form A
: Standard Sensitive
K
012
: 5…..18VDC
See coil data chart
(d)
Coil voltage
(e)
(f)
Contact material
Special type
W
: Silver alloy
HC :
High capacity type (20A)
Actual marking does not carry the type name: “FTR”
E.g.: Ordering code: FTR-K1AK012W-HC Actual marking: K1AK012W-HC
1
FTR-K1 Series
■
Specifications
Item
FTR-K1AK( )W-HC
1 form A (SPST-NO)
Silver alloy
Single
Remark
Contact Configuration
data
Material
Construction
Contact rating
20A, 250VAC
24A
Resistive
Max. carrying current
Max. switching power
Max. switching voltage
Min. switching load
5.000VA
440VAC
100mA 5VDC
400mW
Coil
Rated power consumption
Operate power consumption
At 20ºC
196mW
At 20ºC
Operating temperature
range
-40ºC ~ +85ºC
No frost, no condense dew
Time
Operate
Max. 15ms (without diode)
Max. 5ms (without diode)
Min. 20 x 10⁶ operations
Min. 100 x 10³ operations
Min. 1.000MΩ
Nominal voltage, without bounce
Nominal voltage, without bounce
Release
Life
Mechanical
Electrical
At room temperature
Insulation resistance
At 500VDC
Dielectric
Open con
–
1.000VAC (50/60 Hz), 1 minute
withstanding
tacts
voltage
Coil contact
5.000VAC (50/60 Hz), 1 minute
Surge strength
10,000V (1.2 × 50 μs)
Between coil and contacts
Between coil and contacts
Clearance / Creepage
10.0 / 10.0mm
Insulation
(IEC/
EN61810-1)
Voltage
250V
Pollution
degree
3
Material
IIIa
group
Other
Vibration
Misoperation
10 to 55 Hz at single amplitude of 0.75mm
resistance
Endurance
10 to 55 Hz at single amplitude of 0.75mm
100m/s² (11±1ms)
Shock resis-
Misoperation
tance
Endurance
1.000m/s² (6±1ms)
.
2
FTR-K1 Series
■
Coil Data
Coil
code
Rated Coil
Voltage
(VDC)
Coil Resistance
Must Operate
Must Release
Voltage
*
(VDC)
Nomal Power (mW)
+/-10%
(Ω)
Voltage
*
(VDC)
005
006
012
018
5
6
62
90
3.5
4.2
0.5
0.6
1.2
1.8
Approx. 400
12
18
360
810
8.4
12.6
Note: All values in the table are valid for 20degC and zero contact current unless otherwise specified.
*
:
Specified operated values are valid for pulse wave voltage.
■
Safety Standards
Type
Compliance
Contact Rating
UL
UL 508
E63614
Flammability: UL 94-V0 (plastics)
20A, 277VAC , Resistive
100k operations at 85°C
■
Dimensions
•
Dimensions
φ
0ꢀꢁꢂ
0ꢀ3
0ꢀꢂ
6 ꢃꢄre soꢅꢆer
(2ꢀ6)
0ꢀ9
ꢈꢀꢂ
12ꢀꢈ
ꢇ0ꢀ3
0ꢀ9
20
29
ꢇ0ꢀ3
ꢂ
2ꢀ6
Note: Dimensions of the terminals do not include thickness of pre-solder.
3
FTR-K1 Series
•
Schematics
(BOTTOM VIEW)
ꢂ
ꢃ
ꢀOM
ꢄ
ꢁO
ꢅ
2
1
Orientation marꢆ
ꢀonnect terminaꢇs ꢈ2 anꢉ ꢈꢃꢊ
ꢈ1 anꢉ ꢈꢄ on the ꢋꢀꢌ
•
PC Board Mouting Hole Layout
(BOTTOM VIEW)
(2ꢀ6)
20
ꢁ
2 ꢃ
φ
1
ꢄ ꢃ
φ
1ꢀ3
Torelance: ±0.1 unless otherwise specified.
( ):
Reference value
Unit: mm
4
FTR-K1 Series
GENERAL INFORMATION
1. ROHS
Compliance
•
All relays produced by Fujitsu Components are compliant with RoHS directive 2011/65/EU including amend-
ments.
•
Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 2001/65/EU.
Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for
new designs.
•
All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at:
•
Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified. This material has
been verified to be compatible with PbSn assembly process.
2.
Recommended Lead Free Solder Profile
•
Recommended solder for assembly: Sn-3.0Ag-0.5Cu.
Solder by Soldering Iron:
Soldering Iron
30-60W
Temperature:
Duration:
maximum 350-360˚C
maximum 3 sec.
Flow Solder condition:
Pre-heating:
maximum 120˚C
within 90 sec.
Soldering:
dip within 5 sec. at
255˚C ± 5˚C solder bath
Relay must be cooled by air immediately
after soldering
We highly recommend that you confirm your actual solder conditions
3. Moisture
Sensitivity
•
Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicat-
ed
4. Tin
Whiskers
•
Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable
length whisker was found by our in house test.
5
FTR-K1 Series
Fujitsu Components International Headquarter Offices
Japan
Asia Pacific
Korea
FUJITSU COMPONENT LIMITED
Shinagawa Seaside Park Tower 19
F
,
12-4, Higashi-shinagawa 4-chome, Shinagawa-ku,
Tokyo,140-0002, Japan
FUJITSU COMPONENTS ASIA, LTD.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
FUJITSU COMPONENTS KOREA LIMITED
Alpha Tower #403, 645 Sampyeong-dong,
Bundang-gu, Seongnam-si,
Gyeonggi-do,
13524 Korea
Tel: (81-3) 3450-1682
Tel: (65) 6375-8560
Tel: (82) 31-708-7108
Fax: (81-3) 3474-2385
Fax: (65) 6273-3021
Fax: (82) 31-709-7108
Email: fcl-contact@cs.jp.fujitsu.com
Email: fcal@sg.fujitsu.com
Email: fcal@sg.fujitsu.com
North and South America
China
FUJITSU COMPONENTS AMERICA, INC
2290 North First Street, Suite 212
San Jose, CA 95131, USA
FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD.
Unit 4306, InterContinental Center
100 Yu Tong Road, Shanghai 200070,
China
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Tel: (86-21) 3253 0998
Email: components@us.fujitsu.com
Web: us.fujitsu.com/components
Fax: (86-21) 3253 0997
Email: fcal@sg.fujitsu.com
Europe
Hong Kong
FUJITSU COMPONENTS EUROPE B.V.
Diamantlaan 25
2132 WV Hoofddorp
FUJITSU COMPONENTS HONG KONG CO., LTD
Unit 506, Inter-Continental Plaza
No.94 Granville Road, Tsim Sha Tsui, Kowloon,
Hong Kong
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Tel: (852) 2881-8495
Tex: (852) 2894-9512
Email: fcal@sg.fujitsu.com
©2016 Fujitsu Components Europe B.V.
All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general
information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive,
complete and up to date.
Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its
employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related
graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability
for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use,
with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness,
rd
usefulness, availability and completeness thereof. Rev. Nov 23 , 2016
6
