Jiangsu-Changjing-Electronics-Technology-Co—Ltd–AD-DTC114EM
| Part # | Jiangsu-Changjing-Electronics-Technology-Co—Ltd–AD-DTC114EM |
Download  | Jiangsu-Changjing-Electronics-Technology-Co—Ltd–AD-DTC114EM |
AD-DTC114E series
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD.
AD-DTC114E Series Digital Transistor (Built-In Resistors)
AD-DTC114EM/DTC114EE/DTC114EUA/DTC114EKA /DTC114ECA/DTC114ESA
Digital transistor (NPN)
FEATURES
⚫
⚫
Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors
(see equivalent circuit)
The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They
also have the advantage of almost completely eliminating parasitic effects.
Only the on/off conditions need to be set for operation, making device design easier
AEC-Q101 qualified
⚫
⚫
PIN CONNECTIONS
AD-DTC114EM
AD-DTC114EE
AD-DTC114EUA
AD-DTC114EKA
AD-DTC114ECA
AD-DTC114ESA
Version 1.0
1 / 17
2021-07-01
AD-DTC114E series
EQUIVALENT CIRCUIT
ORDERING INFORMATION
Part number
AD-DTC114EM
AD-DTC114EE
AD-DTC114EUA
AD-DTC114EKA
AD-DTC114ECA
Marking
Package
SOT-723
Packing method
Reel
Pack quantity
8000pcs/reel
24
24
24
SOT-523
SOT-323
SOT-23-3L
SOT-23
Reel
Reel
Reel
Reel
3000pcs/reel
3000pcs/reel
3000pcs/reel
3000pcs/reel
24
24
C114
E
XXX
1)
AD-DTC114ESA
TO-92S
TO-92S
Bulk
1000pcs/bag
3000pcs/box
C114
AD-DTC114ESA-TA
T
a
pe
E
XXX
1)
1
）
XXX = Date code
Version 1.0
2 / 17
2021-07-01
AD-DTC114E series
MAXIMUM RATINGS (T
j
= 25°C unless otherwise specified)
Parameter
Symbol
Value
UA KA
Unit
M
E
CA
SA
Supply voltage
Input voltage
Output current
V
CC
V
IN
50
-10 ~ 40
50
V
V
1)
I
O
mA
mA
Peak collector current
I
CM
100
1)
Maximum power dissipation
P
D
100
150
200
200
200
300
mW
°C
Operating junction and storage temperature range
T
j
, T
stg
-55 ~ 150
ELECTRICAL CHARACTERISTICS (T
j
= 25°C unless otherwise specified)
Parameter
Input voltage
Symbol
V
I(off)
V
I(on)
V
O(on)
I
I
Test condition
V
CC
= 5V, I
O
= 100µA
Min
Typ
Max
–
Unit
0.5
–
V
V
O
= 0.3
V
, I
O
= 1mA
I
O
/I
I
= 10mA/0.5mA
V
I
= 5V
–
–
–
3
Output voltage
Input current
–
–
0.3
0.88
0.5
–
V
mA
µA
–
–
Output current
DC current gain
Input resistance
Resistance ratio
Transition frequency
I
O(off)
G
I
V
CC
= 50
V
, V
I
= 0V
V
O
= 5V, I
O
= 5mA
–
–
30
7
–
k
Ω
R
1
10
1
13
1.2
–
R
2
/R
1
f
T
0.8
–
V
O
= 10V, I
O
= 5mA, f = 100MHz
250
MHz
1) Maximum allowed temperature T
j
= 25
°
C.
Version 1.0
3 / 17
2021-07-01
AD-DTC114E series
SOT-723 PACKAGE OUTLINE DIMENSIONS
SOT-723 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
5 / 17
2021-07-01
AD-DTC114E series
SOT-523 PACKAGE OUTLINE DIMENSIONS
SOT-523 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
7 / 17
2021-07-01
AD-DTC114E series
SOT-323 PACKAGE OUTLINE DIMENSIONS
SOT-323 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
9 / 17
2021-07-01
AD-DTC114E series
SOT-23-3L PACKAGE OUTLINE DIMENSIONS
SOT-23-3L SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
11 / 17
2021-07-01
AD-DTC114E series
SOT-23 PACKAGE OUTLINE DIMENSIONS
SOT-23 SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
13 / 17
2021-07-01
AD-DTC114E series
TO-92S PACKAGE OUTLINE DIMENSIONS
TO-92S SUGGESTED PAD LAYOUT
Note:
1. Controlling dimension in millimeters.
2. General tolerance: ±0.05mm.
3. The pad layout is for reference purpose only.
Version 1.0
15 / 17
2021-07-01
AD-DTC114E series
PUBLISHED BY
JIANGSU CHANGJING ELECTRONICS TECHNOLOGY CO., LTD.
13th Floor, C Block, Tengfei Building, Yan Chuang Yuan, Nanjing Jiangbei New Area, China
LEGAL DISCLAIMER
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples, hints or typical values stated herein and/or any information regarding the application of
the device, JSCJ hereby disclaims any and all warranties and liabilities of any kind, including without limitation,
warranties of non-infringement of intellectual property rights of any third party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in
this document and any applicable legal requirements, norms and standards concerning customer’s products and any
use of the product of JSCJ in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
INFORMATION
For further information on technology, delivery terms and conditions as well as prices, please contact your nearest
WARNINGS
Due to technical requirements, products may contain dangerous substances. For information on the types in question,
please contact your nearest JSCJ office.
Except as otherwise explicitly approved by JSCJ in a written document signed by authorized representatives of JSCJ,
JSCJ’s products may not be used in any applications where a failure of the product or any consequences of the use
thereof can reasonably be expected to result in personal injury.
Version 1.0
17 / 17
2021-07-01
