Laird-Signal-Laird-Tech-A17556-125

Hybrid Thermal/EMI Absorber  

CoolZorb 600 Series  

HYBRID THERMAL/EMI ABSORBER  

CoolZorb 600 is a 2

nd

generation hybrid absorber/thermal management material that is used  

for EMI mitigation.

 

This product is used like a traditional thermal interface material between  

heat source such as an IC and heat sink or other heat transfer device or metal chassis.  

CoolZorb 600 also functions to suppress unwanted energy coupling, resonances or surface  

currents causing board level EMI issues.  

FEATURES AND BENEFITS  

•

Good thermal conductivity with good EMI suppression within 1-90GHz  

•

Inherent surface tack typical of standard thermal gap fillers  

•

Compliant with minimal component stress during assembly  

•

Meets UL 94 V-0 flame requirements  

VALUE  

•

Dual functional properties of thermal conductivity and EMI reduction provide two in  

one solution for easier design and assembly and lower cost of ownership  

•

Improved reliability performance of electronics  

o

Better signal integrity due to reduction of EMI  

o

Consistent performance of electronics

 

due to temperature stability  

and low outgassing properties of product  

•

Improved EMC performance and resultant lower cost to meet compliance  

requirements  

•

Environmentally friendly solution that meets regulatory requirements including RoHS  

and REACH  

TYPICAL PROPERTIES  

Color  

TYPICAL DATA  

Dark gray  

TEST METHOD  

Visual  

Thermal conductivity  

Density  

3.0W/m-K  

4.2 g/cc  

ASTM D5470  

ASTM D792  

ASTM D2240  

ASTM D638  

NA  

Hardness  

60 Shore 00  

13.5 psi  

Tensile strength  

Temperature Range  

UL Flammability  

Volume resistivity  

Outgassing (TML)  

Outgassing (CVCM)  

-40°C to 175°C  

94 V0  

3 x 10

13

Ω

*cm  

UL  

ASTM D257  

ASTM E595-07  

ASTM E595-07  

IPC-TM-650 2.4.41  

0.37%  

0.04%  

Coefficient of Thermal Expansion  

(CTE)  

99.05

μm/m

°C  

EMI Attenuation @ 10 GHz  

28.6 dB/cm  

EMI Attenuation @ 20 GHz  

Standard Thickness range  

Thickness Tolerance  

53.3 dB/cm  

.020”-.200” (1.0-5.1mm)  

+/- 10%  

Americas: +1.866.928.8181  

Europe: +49.(0).8031.2460.0  

Asia: +86.755.2714.1166  

Hybrid Thermal/EMI Absorber  

CoolZorb 600 Thermal resistance at 50C (ASTM D5470)  

CoolZorb 600 Percent Deflection (ASTM D575)  

CoolZorb Deflection Comparison (ASTM D575)  

CoolZorb Attenuation (dB/cm)  

AVAILABILITY  

Standard sheet size is 18” X 18”  

•

•

•

Thickness availability range is 0.020” – 0.200” (0.5mm- 5.1mm)  

Common standards for thickness are 0.020”, 0.030”, 0.040”, 0.060”and 0.080” (0.5, 0.75,  

1.0, 1.5 and 2.0mm)  

No charge samples are available in 4” X 4” size for each of the above common thicknesses  

•

PART NUMBER SYSTEM  

PRODUCTION sheets (18”X18”) use the following designation when ordering:

 

A17556-XXX  

where XXX is the sheet thickness in thousandths of an inch, example A17556-040 for  

0.040”x18”x18”  

•

SAMPLE sizes of 0.020”, 0.030”, 0.040”, 0.060” and 0.080” thicknesses are available without  

charge. 4”

 

x 4” pieces are ordered with the part numbers CZ600-020S, CZ600-030S, CZ600-  

040S, CZ600-060S and CZ600-080S.

 

Other sizes may be available with NRE charge.  

•

RFP-DS-COOLZORB 600 101019  

A

ny information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end  

user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or  

consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2015 Laird Technologies,  

Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third  

parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.