MA-COM-SMAL7
| Part # | MA-COM-SMAL7 |
Download  | MA-COM-SMAL7 |
AL7 / SMAL7
Cascadable Amplifier
50 to 500 MHz
Rev. V4
Features
Product Image
SYMMETRICAL CLIPPING:
GOOD EVEN-ORDER SUPPRESSION
HIGH GAIN: 13 dB (TYP.)
LOW VSWR: < 1.5:1 (TYP.)
FAST PULSE RECOVERY TIME: < 50 NSEC (TYP.)
Description
The AL7 limiting amplifier is a discrete hybrid design, which
uses thin film manufacturing processes for accurate
performance and high reliability.
This design uses a Schottky diode limiter circuit at the output,
and a single stage bipolar transistor feedback amplifier at the
output. An RF choke is used for DC power supply decoupling
.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
Package
TO-8
AL7
SMAL7
Surface Mount
SMA Connectorized
CAL7 **
** The connectorized version is not RoHs compliant.
Electrical Specifications:
Z
0
= 50
, V
CC
= +15 V
DC
Absolute Maximum Ratings
Parameter
Absolute
Typical
25ºC
Guaranteed
0º to 50ºC
–
54º to +85ºC*
Maximum
–
62ºC to +125ºC
+125ºC
Parameter
Units
Storage Temperature
Case Temperature
DC Voltage
Frequency
MHz
dB
20-550
13.0
50-500
12.0
50-500
11.0
+17 V
Small Signal Gain (min)
Continuous Input Power
+13 dBm
Short Term Input power
(1 minute max.)
Gain Flatness (max)
dB
±0.2
±0.5
±0.7
50 mW
0.5 W
125ºC
Peak Power (3 µsec max.)
Noise Figure (max)
50-300 MHz
300-500 MHz
dB
dB
5.0
5.5
6.0
6.5
6.5
7.0
“S” Series Burn
-In
Temperature (case)
Thermal Data: V
CC
= +15 V
DC
Power Output @ 1 dB comp. (min)
-1.5
-5.0
-7.0
dBm
dBm
Parameter
Rating
45ºC/W
0.560 W
Output Limiting Level (max)
Pin = +10 dBm
+0.5
+1.5
+2.5
Thermal Resistance
θ
jc
Transistor Power Dissipation P
d
VSWR Input / Output (max)
DC Current @ 15 Volts (max)
1.1:1/<1.5:1 1.7:1/
2.0:1
54 60
1.8:1 / 2.1:1
62
Junction Temperature Rise
Above Case T
jc
25.2ºC
mA
* Over temperature performance limits for part number CAL7, guaranteed from 0
o
C to +50
o
C only.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
AL7 / SMAL7
Cascadable Amplifier
50 to 500 MHz
Rev. V4
Typical Performance Curves at +25°C
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
AL7 / SMAL7
Cascadable Amplifier
50 to 500 MHz
Rev. V4
Outline Drawing: TO-8
*
Typical Performance Curves at +25°C
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: Surface Mount
*
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: SMA Connectorized
*
WEIGHT: 19 grams (0.67 oz.) max
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
AL7 / SMAL7
Cascadable Amplifier
50 to 500 MHz
Rev. V4
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc (“MACOM”)
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM’s Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
