MA-COM-SMPA2010
| Part # | MA-COM-SMPA2010 |
Download  | MA-COM-SMPA2010 |
PA2010 / SMPA2010
Cascadable Amplifier
200 to 2000 MHz
Rev. V2
Features
Product Image
HIGH OUTPUT POWER: +25.5 dBm (TYP.)
HIGH THIRD ORDER IP
3
: +33 dBm (TYP.)
MODERATE NOISE FIGURE: 5.0 dBm (TYP.)
LOW VSWR: 1.5:1 (TYP.)
Description
The PA2010 power amplifier is a discrete hybrid design, which
uses thin film manufacturing processes for accurate
performance and high reliability.
This single stage GaAs FET feedback amplifier design
displays impressive performance characteristics over a
broadband frequency range.
Both TO-8 and Surface Mount packages are hermetically
sealed, and MIL-STD-883 environmental screening is avail-
able.
Ordering Information
Part Number
PA2010
Package
TO-8
SMPA2010
Surface Mount
SMA Connectorized **
MAAP-008326-CP2010
** The connectorized version is not RoHs compliant.
Absolute Maximum Ratings
Electrical Specifications:
Z
0
= 50
, V
CC
= +15 V
DC
Parameter
Absolute
Maximum
Typical
25ºC
0.2-2.4
10.0
Guaranteed
Parameter
Units
0º to 50ºC
–
54º to +85ºC*
Storage Temperature
Case Temperature
DC Voltage
–
62ºC to +150ºC
+85ºC
Frequency
GHz
dB
0.2-2.0
9.0
0.2-2.0
8.5
+17 V
Small Signal Gain (min)
Gain Flatness (max)
Reverse Isolation
Continuous Input Power
+17 dBm
dB
±0.3
±0.7
±1.0
Short Term Input power
(1 minute max.)
100 mW
0.5 W
dB
20
Peak Power (3 µsec max.)
Noise Figure (max)
dB
5.5
6.5
7.0
“S” Series Burn
-In
Temperature (case)
+85ºC
Power Output
@ 1 dB comp. (min)
dBm
25.5
23.5
23.0
IP3
IP2
dBm
dBm
+33
+50
Thermal Data: V
CC
= +15 V
DC
Parameter
Rating
50ºC/W
1.25 W
Second Order Harmonic IP
dBm
+55
Thermal Resistance
θ
jc
Transistor Power Dissipation P
d
VSWR Input / Output (max)
DC Current @ 15 Volts (max)
1.8:1 / 1.5:1
1.9:1 / 1.7:1
179 187
2.0:1 / 1.8:1
189
Junction Temperature Rise
Above Case T
jc
+63ºC
mA
* Over temperature performance limits for part number CPA2010, guaranteed from 0
o
C to +50
o
C only.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
PA2010 / SMPA2010
Cascadable Amplifier
200 to 2000 MHz
Rev. V2
Typical Performance Curves at +25°C
Outline Drawing: TO-8
*
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: Surface Mount
*
WEIGHT: 1 gram (0.04 oz.) max
Outline Drawing: SMA Connectorized
*
WEIGHT: 19 grams (0.67 oz.) max
2
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
PA2010 / SMPA2010
Cascadable Amplifier
200 to 2000 MHz
Rev. V2
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc (“MACOM”)
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM’s Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
For further information and support please visit:
