Microchip-Tech-RN52-I-RM
| Part # | Microchip-Tech-RN52-I-RM |
Download  | Microchip-Tech-RN52-I-RM |
RN52 Bluetooth Audio Module
FullyꢀCertifiedꢀBluetooth
®
ꢀVersionꢀ3.0ꢀModule
PRODUCTꢀBRIEF
RN52-I/RM
Roving Networks’ RN52-I/RM Bluetooth audio module provides an
integrated solution for delivering high-quality stereo audio in a
small form factor. It combines a Class 2 Bluetooth radio with an
embedded DSP processor, controlled and configured by simple
ASCII commands and GPIO.
FEATURES
It integrates R
F
, a
b
aseband controller, and DS
P
,
m
aking it a complete
Bluetooth audio wireless link. The RN52 supports HSP/HF
P
,
A
2D
P
, A
V
RC
P
,
SP
P
,
a
nd iAP profiles and includes support for codecs such as SBC, aptX®,
and AAC. It provides a UART interface, GPIO, stereo speaker outputs, stereo
microphone inputs, and a USB port (see block diagram).
•ꢀ
Fully certified Bluetooth
®
version 3.0 audio
module, fully compatible with Bluetooth version
2.1+EDR, 1.2, and 1.1
•ꢀ
Software configurable through commands over
UART console interface
•ꢀ
Embedded Bluetooth stack profiles: SP
P
,
APPLICATIONS
A2D
P
,
H
FP/HS
P
,
a
nd AVRCP
•ꢀ
Wireless stereo speakers
•ꢀ
Smartphone app streaming
•ꢀ
Supports iAP profile discovery for iPhone
®
and
and headsets
iPod
®
Bluetooth accessories
•ꢀ
Available as an A2DP audio source or sink
•ꢀ
Postage-stamp-sized form factor, 13.5 x 26
•ꢀ
Automotive hands free audio
•ꢀ
Remote control for media player
•ꢀ
Intercom push-to-talk audio connection
•ꢀ
Wireless audio docking
station for smartphones
•ꢀ
High-quality, 2-channel
x 2.7mm
audio streaming
•ꢀ
Dual-channel, differential audio input and
output for highest quality audio
•ꢀ
External audio codecs supported via I
2
S and
S/PDIF interface
•ꢀ
Castellated SMT pads for easy and reliable
PCB mounting
•ꢀ
Additional support for codecs such as aptX
®
,
AAC, MP3, and others
•ꢀ
Environmentally friendly, RoHS compliant
•ꢀ
Certifications: FCC, IC, CE
•ꢀ
Bluetooth SIG certified
RN52-I/RM-PB v. 1.0r 01/13
© 2013 Roving Networks. All rights reserved.
iPhone® and iPod® are registered trade marks of Apple, Inc. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions.
RN52-I/RM Bluetooth Audio Module: Product Brief
BLOCKꢀꢀ
PHYSICALꢀDIMENSIONS
DIAGRAM
RN52-I/RM
2xLED
PCB Antenna
Bluetooth 3.0
RF Baseband
RN52-I/RM
T
o
p View
Audio DSP
16-Bit Stereo
CODEC
26.0000
16-Bit RISC MCU
16-MBit Flash
UART
USB
SPI
PCM
11xPIO
1xAIO
RF Shield
2.7 mm
SPECIFICATIONS
ORDERINGꢀINFORMATION
PartꢀNumber
Description
Standard
Bluetooth 3.0
RN52-I/RM
Bluetooth 3.0 Class 2 surface mount audio module with PCB
trace antenna
StandardꢀProfiles
Frequency
A2D
P
, A
V
RC
P
,
S
P
P
,
H
FP/HS
P
,
i
AP
2.4 ~ 2.48 GHz
RN52APL-I/RM
Bluetooth 3.0 Class 2 surface mount audio module with PCB
trace antenna, supports A2D
P
,
S
PP profiles with additional
support for iAP data communication
ModulationꢀMethod
MaximumꢀDataꢀRate
RFꢀInputꢀImpedanceꢀ
Interface
GFSK, PI/4-DQPSK, 8 DPSK
3 Mbps burst mode, 1.5 Mbps sustained
50 ohms
RN52APT-I/RM
RN-52-EK
Bluetooth 3.0 Class 2 surface mount audio module with
aptX™ codec (decode), PCB trace antenna
UART, USB, Bluetooth, GPIO
Class 2: 10 meters (33 feet)
-85 dBm at 0.1 % BER
+4 dBm (typical)
Evaluation kit for the RN52 audio Bluetooth module – includes
evaluation board, USB cable, and 2 USB mini-speakers
OperationꢀRange
Sensitivityꢀ
RFꢀTXꢀPowerꢀ
Volume Up
Previous
T
r
ack
Differential Audio In/Out
EVALUATIONꢀKIT
Firmware Updates
Status LEDs
Pause/Play
Volume Down
Next
T
r
ack
GPIOs
USB to UART
(SPP & CMD Mode)
Power-On /
Pairing Mode
UART, PCM, I
2
S,
S/PDI
F
,
G
PIO
Audio Out – 3.5mm TRR
Dual Channel
Audio Inputs
Audio In – 3.5mm TRR
102 Cooper Court
| Los
Gatos, CA 95032
| +1
408 395-5300
