Mini-Circuits-GALI-6-
| Part # | Mini-Circuits-GALI-6- |
Download  | Mini-Circuits-GALI-6- |
Surface Mount
Monolithic Amplifier
DC-4 GHz
Product Features
• InGaP HBT microwave amplifier
• Miniature SOT-89 package
• Internally Matched to 50 Ohms
• Frequency range, DC to 4 GHz
Generic photo used for illustration purposes only
• Output power, 18.2 dBm typ.
Gali 6+
• Excellent package for heat dissipation, exposed metal bottom
• Low thermal resistance for high reliability
• Aqueous washable
CASE STYLE: DF782
• Protected by US Patent 6,943,629
• Low additive phase noise, typically -169 dBc/Hz @10 KHz offset
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Typical Applications
• Cellular
• PCS
• Communication receivers & transmitters
• Suitable for low phase noise applications
General Description
Gali 6+
(RoHS compliant) is a wideband amplifier offering high dynamic range.
It has repeatable perfor-
mance from lot to lot, and is enclosed in a SOT-89 package.
It uses patented Transient Protected Darling-
ton configuration and is fabricated using InGaP HBT technology.
Expected MTTF is 2,500 years at 85°C
case temperature.
Gali 6+
is designed to be rugged for ESD and supply switch-on transients.
simplified schematic and pin description
RF-OUT and DC-IN
3 RF-OUT
& DC-IN
RF IN
4
2 GROUND
1 RF-IN
GROUND
Function
Pin Number
Description
RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation.
RF IN
1
RF output and bias pin.
DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation.
An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended
Application Circuit”.
RF-OUT and DC-IN
3
Connections to ground.
Use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
GND
2,4
Notes
RE
V
. T
ECO-005768
D60129
EE-7974Q
GALI-6+
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit
’
s
a
pplicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectivel
y
,
“
Standard
T
e
rms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard
T
e
rms and the exclusive rights and remedies thereunde
r
,
p
lease visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
RS/YB/FL/AM
210218
Page 1 of 4
Mini-Circuits
Monolithic InGaP HBT
MMIC Amplifier
Gali 6+
Electrical Specifications at 25°C and 70mA, unless noted
Parameter
Frequency Range*
Gain
Min.
DC
—
Typ.
Max.
Units
GHz
dB
4
f=0.1 GHz
f=1 GHz
12.2
12.2
11.8
11.3
11.4
12.3
14
—
—
—
—
—
—
—
f=2 GHz
10
f=3 GHz
—
f=4 GHz
—
f=6 GHz
—
Input Return Loss
Output Return Loss
f= DC to 3 GHz
f= 3 to 4 GHz
f= DC to 3 GHz
f= 3 to 4 GHz
f=1 GHz
dB
dB
15.5
11
9.5
Output Power @ 1 dB compression
Output IP3
16.5
18.2
35.5
4.5
—
dBm
dBm
dB
f=1 GHz
Noise Figure
f=1 GHz
Additive Phase Noise
2 GHz, 10 KHz offset
-169
70
dBc/Hz
mA
Recommended Device Operating Current
Device Operating Voltage
4.6
5.0
5.6
V
Device Voltage Variation vs. Temperature at 70 mA
Device Voltage Variation vs. Current at 25°C
Thermal Resistance, junction-to-case
1
-3.0
11.8
93
mV/°C
mV/mA
°C/W
*
Guaranteed specification DC-4 GHz.
Low frequency cut off determined by external coupling capacitors.
Absolute Maximum Ratings
Parameter
Ratings
-45°C to 85°C
-65°C to 150°C
85mA
Operating Temperature*
Storage Temperature
Operating Current
Input Power
20dBm
Note: Permanent damage may occur if any of these limits are exceeded.
These ratings are not intended for continuous normal operation.
1
Case is defined as ground leads.
*Based on typical case temperature rise 5°C above ambient.
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit
’
s
a
pplicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectivel
y
,
“
Standard
T
e
rms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard
T
e
rms and the exclusive rights and remedies thereunde
r
,
p
lease visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
Page 2 of 4
Monolithic InGaP HBT
MMIC Amplifier
Gali 6+
Product Marking
4
06
1
2
3
Markings in addition to model number designation may appear for internal quality control purposes.
Additional Detailed Technical Information
Additional information is available on our web site.
To access this information enter the model number on
our web site home page.
Performance data, graphs, s-parameter data set (.zip file)
Case Style: DF782
Plastic package, exposed paddle, lead finish: Matte-Tin
Tape & Reel: F55
7” reels with 20, 50, 100, 200, 500, 1K devices.
Suggested Layout for PCB Design: PL-019
Evaluation Board: TB-409-6+
Environmental Ratings: ENV08T2
Recommended Application Circuit
R BIAS
R bias
(R equired)
Vcc
“1%” Res. Values (ohms)
for Optimum Biasing
Vcc
C bypass
7
8
9
30.1
43.2
56.2
69.8
84.5
97.6
113
127
140
154
169
182
196
210
Ibias
3
4
2
R
F
C
(O
p
tional)
OUT
C block
IN
10
11
12
13
14
15
16
17
18
19
20
Vd
1
C block
Test Board includes case, connectors, and components (in bold) soldered to PCB
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit
’
s
a
pplicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectivel
y
,
“
Standard
T
e
rms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard
T
e
rms and the exclusive rights and remedies thereunde
r
,
p
lease visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
Page 3 of 4
Monolithic InGaP HBT
MMIC Amplifier
Gali 6+
ESD Rating
Human Body Model (HBM): Class 1B (500v to < 1000v) in accordance with ANSI/ESD STM 5.1 – 2001
Machine Model (MM): Class M1 (< 100v) in accordance with ANSI/ESD STM 5.2 – 1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C
No. Test
Required
Condition
Standard
Quantity
45 units
45 units
45 units
45 units
Low Power Microscope
Magnification 40x
MIP-IN-0003
(MCT spec)
1
2
3
4
Visual Inspection
Electrical Test
SAM Analysis
SCD
(MCL spec)
Room Temperature
Less than 10% growth in term of
delamination
J-Std-020C
(Jedec Standard)
Bake at 125°C for 24 hours
Soak at 85°C/85%RH for 168 hours
Reflow 3 cycles at 260°C peak
Moisture Sensitivity
Level 1
J-Std-020C
(Jedec Standard)
MSL Test Flow Chart
Visual
Inspection
Electrical
T
e
st
SAM Analysis
Start
Soak
85°C/85RH
168 hours
Reflow 3 cycles,
260°C
Bake at 125°C,
24 hours
Visual
Inspection
Electrical
T
e
st
SAM Analysis
Notes
A.
Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B.
Electrical specifications and performance data contained in this specification document are based on Mini-Circuit
’
s
a
pplicable established test performance criteria and measurement instructions.
C.
The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectivel
y
,
“
Standard
T
e
rms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard
T
e
rms and the exclusive rights and remedies thereunde
r
,
p
lease visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
®
Mini-Circuits
Page 4 of 4
