MultiTech-ANLTE4-2HRA

ANTENNAS  

Antennas  

Antenna System Cellular Devices  

The cellular/wireless performance depends on the implementation and antenna design. The integration of the  

antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early  

so the performance is not compromised. If changes are made to the device’s certified antenna system, then  

recertification will be required by specific network carriers.  

The antenna system is defined as the UFL connection point from the device to the specified cable specifications  

and specified antenna specifications.  

Requirements for Cellular Antennas with regard to FCC/IC Compliance  

This device has been designed to operate with the antennas listed below and having a maximum antenna gain of  

6.63 dBi for the 700 MHz band, 6.00 dBi for 1700 MHz band, and 9.01 dBi for the 1850 MHz frequency band.  

Antennas not included in this list or that have a gain greater than specified are strictly prohibited for use with this  

device. The required antenna impedance is 50 ohms.  

LTE Cat M1 Antenna  

Devices were approved with the following antenna:  

Manufacturer:  

Description:  

Wieson  

LTE Antenna with SMA-Male Connector  

GY115IE002-001  

Model Number  

MultiTech ordering information:  

Model  

Quantity  

ANLTE4-1HRA  

ANLTE4-2HRA  

ANLTE4-10HRA  

ANLTE4-50HRA  

1

2

10  

50  

OEM Integration  

FCC & IC Information to Consumers  

The user manual for the consumer must contain the statements required by the following FCC and IC regulations:  

47 C.F.R. 15.19(a)(3), 15.21, 15.105 and RSS-Gen Issue 3, Dec 2010; 7.1.2 and 7.1.3  

FCC Grant Notes  

The OEM should follow all the grant notes listed below. Otherwise, further testing and device approvals may be  

necessary.  

FCC Definitions  

Portable: (§2.1093)

— A portable device is defined as a transmitting device designed to be used so that the  

radiating structure(s) of the device is/are within 20 centimeters of the body of the user.  

Mobile: (§2.1091)

— A mobile device is defined as a transmitting device designed to be used in other than fixed  

locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally  

maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons.  

Actual content pending Grant

:

This device is a mobile device with respect to RF exposure compliance. The  

antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all  

persons, and must not be collocated or operate in conjunction with any other antenna or transmitter except in  

accordance with FCC multi-transmitter product guidelines. Installers and end-users must be provided with specific  

information required to satisfy RF exposure compliance for installations and final host devices. (See note under  

Grant Limitations.) Compliance of this device in all final host configurations is the responsibility of the Grantee.  

Note:

Host design configurations constituting a device for portable use (<20 cm from human body) require  

separate FCC/IC approval.  

Note:

Only use antennas approved respectively as listed for the unlicensed radios (Bluetooth/Wi-Fi)  

Host Labeling  

The following statements are required to be on the host label:  

This device contains FCC ID: {Add the FCC ID of the specific device}  

This device contains equipment certified under IC ID: {Add the IC ID of the specific device}  

For additional labeling requirements, see the product’s Labeling Requirements. For the FCC and IC IDs, see specific  

certificate information in the Regulatory Statement chapter.  

SocketModem

®

Cell MTSMC-MAT1 Device Guide