Murata-Electronics-BLM18KG300WH1D
| Part # | Murata-Electronics-BLM18KG300WH1D |
Download  | Murata-Electronics-BLM18KG300WH1D |
Reference Only
Spec. No. JENF243A-9143A-01
P.1/6
Chip Ferrite Bead BLM18
□□□□□
WH1D
Murata Standard Reference Specification[AEC-Q200]
1.Scope
This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM18_WH Series based on
AEC-Q200.
2.Part Numbering
(ex.)
BL
M
18
(3)
AG
(4)
471
(5)
W
H
1
(8)
D
(9)
(1)
(2)
(6) (7)
(1)Product ID
(2)Type
(4)Characteristics
(5)Typical Impedance at 100MHz
(7)Category(for Automotive Electronics)
(8)Numbers of Circuit
(3)Dimension (L×W)
(6)Performance(for Conductive Glue)
(9)Packaging (D:Taping/B:Bulk)
3.Rating
DC Resistance
(
max.)
Impedance (
)
(at 100MHz)
(*1)
(refer to below comment)
Rated
Current
(mA)
Customer
Part Number
MURATA
Part Number
ESD Rank
1B
Values
After
Testing
Initial
Values
Typical at
125
℃
at 150
℃
BLM18AG471WH1D
BLM18AG102WH1D
BLM18KG260WH1D
BLM18KG300WH1D
BLM18KG700WH1D
BLM18KG101WH1D
BLM18KG121WH1D
BLM18KG221WH1D
BLM18KG331WH1D
BLM18KG471WH1D
BLM18KG601WH1D
BLM18KG102WH1D
470±25%
1000±25%
26±25%
470
1000
26
1000
200
500
200
0.20
0.70
0.26
0.8
2000
1850
1650
1500
1500
1400
1250
1100
1000
800
1200
1100
1000
900
900
800
700
600
500
450
0.032
0.035
0.047
0.055
0.055
0.080
0.110
0.160
0.180
0.230
0.037
0.040
0.057
0.065
0.065
0.090
0.125
0.175
0.195
0.245
30±25%
30
70±25%
70
100±25%
120±25%
220±25%
330±25%
470±25%
600±25%
1000±25%
100
120
220
330
470
600
1000
6
Operating Temperature : -55°C to +150°C
Storage Temperature
: -55°C to +150°C
Rated Current is derated as as shown
in the right figure depending on the operating temperature.
+125℃
+150℃
Operating temperature
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243A-9143A-01
P.2/6
4.Style and Dimensions
L：
1.6±0.15
0.025±0.015
0.8±0.15
■
Equivalent Circuit
0.025±0.015
0.4
±
0.
0.4
±
0. 2
2
0.025±0.015
0.025±0.015
Resistance element becomes
dominant at high frequencies.
(
)
Ｔ
(Unit : mm)
■
Unit Mass (Typical value)
Item
T(mm)
0.6
±
0.15
BLM18
KG260/300/700/101/121
：
0.004g
BLM18
KG221/331/471/601/102
：
0.005g
BLM18AG
BLM18KG260/300/700/101/121
BLM18KG221/331/471/601/102
BLM18AG
0.8
±
0.15
5.Marking
No marking.
6.Standard Testing Conditions
Unless otherwise specified
In case of doubt
Temperature : Ordinary Temp. (15
°
C to 35
°
C )
Temperature : 20
°
C
±
2
°
C
Humidity : Ordinary Humidity (25%(RH) to 85%(RH))
Humidity : 60%(RH) to 70%(RH)
Atmospheric pressure : 86kPa to 106kPa
7.Specifications
7-1.Electrical Performance
No.
Item
Specification
Meet item 3.
Test Method
6-1-1 Impedance
Measuring Frequency : 100MHz±1MHz
Measuring Equipment : KEYSIGHT 4991A or the equivalent
Test Fixture : KEYSIGHT 16192A or the equivalent
Measuring Equipment : Digital multi meter
6-1-2 DC
Resistance
Meet item 3.
*Except resistance of the Substrate and Wire
7-2. Mechanical Performance(based on Table 13 for FILTER EMI SUPPRESSORS/FILTERS)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No.
Stress
Test Method
3
High
Temperature
Exposure
1000hours at 150deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
Appearance
Impedance
Change
(at 100MHz)
DC Resistance
No damage
Within ±50%
Meet item 3.
4
5
Temperature Cycling
1000cycles
Meet Table A after testing.
-55 deg C to +150 deg C
Set for 24hours at room
temperature, then measured.
Destructive
Per EIA469
No defects
Physical Analysis
No electrical tests
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243A-9143A-01
P.3/6
AEC-Q200
Murata Specification / Deviation
No.
Stress
Test Method
7
Biased Humidity
1000hours at 85 deg C, 85%RH
Meet Table B after testing.
Apply max rated current.
TableB
Appearance
No damage
Impedance
Change
(at 100MHz)
With in ±50%
(BLM18KG)
With in ±30%
(BLM18AG)
DC Resistance
Meet item 3.
Meet Table A after testing.
If the rated current of arts exceed 10mA,
The operating temperature should be 125 deg C.
8
9
Operational Life
External Visual
Apply 150 deg C 1000hours
Set for 24hours at room
temperature, then measured
Visual inspection
Meet ITEM 4
（
Style and Dimensions
）
Per MIL-STD-202
Method 215
Per MIL-STD-202 Method 213
Condition F
No abnormalities
No defects
10 Physical
Dimension
12 Resistance
to Solvents
13 Mechanical
Shock
Not Applicable
Meet Table C after testing.
TableC
1500g’s (14.7N)/0.5ms/
Half sine
Appearance
Impedance
Change
No damage
With in ±30%
Meet item 3.
(at 100MHz)
DC Resistance
14 Vibration
5g’s(0.049N) for 20 minutes,
12cycles each of 3 orientations
Test from 10-2000Hz.
Solder temperature
Meet Table C after testing.
15 Resistance
to Soldering Heat
Not Applicable
260C+/-5 deg C
Immersion time 10s
17 ESD
Per AEC-Q200-002
Meet Table C after testing.
ESD Rank: Meet Item 3. (Rating)
18 Solderability
Per J-STD-002
Not Applicable
19 Electrical
Characterization Measured
: Impedance
No defects
20 Flammability
21 Board
Flex
Per UL-94
Not Applicable
Not Applicable
Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding tim
Applying Force : 4.8N
Applying Time
：
5s
±
1s
Applying Direction as
shown below.
22 Terminal
Strength
Meet Table A after testing.
30 Electrical
Transient
Per ISO-7637-2
Not Applicable
Conduction
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243A-9143A-01
P.4/6
8.Specification of Packaging
8-1.Appearance and Dimensions
(8mm-wide paper tape)
2.0±0.05
1.5
+0.1
4.0±0.1
4.0±0.1
-0
1.05±0.1
a
Direction of feed
Item
Dimension “a”
0.85Max
BLM18KG260/300/700/101/121
BLM18KG221/331/471/601/102
BLM18AG
1.10Max
(in mm)
(1) Taping
Products shall be packaged in the cavity of the base tape of 8mm-wide,4mm-pitch continuously
and sealed by top tape and bottom tape.
(2) The sprocket holes are to the right as the tape is pulled toward the user.
(3) Spliced point:The base tape and top tape have no spliced point
(4) Cavity:There shall not be burr in the cavity.
(5) Missing components number
Missing components number within
0.025
% of the number per reel or 1 pc., whichever is greater,
and are not continuous. The specified quantity per reel are kept.
8-2.Tape Strength
(1)Pull Strength
Top tape
5N min.
Bottom tape
Top tape
165 to 180 degree
Bottom tape
F
(2)Peeling off force of Top tape
0.1N to 0.6N (Minimum value is typical.)
*Speed of Peeling off:300mm/min
Base tape
8-3.Taping Condition
(1)Standard quantity per reel
Quantity per 180mm reel: 4000 pcs. / reel
(2)There shall be leader-tape (top tape and empty tape ) and trailer- tape(empty tape) as follows.
(3)On paper tape, the top tape and the base tape shall not be adhered at the tip of the empty leader tape
for more than 5 pitch.
(4)Marking for reel
The following items shall be marked on a label and the label is stuck on the reel.
(Customer part number, MURATA part number, Inspection number(
1) , RoHS marking (
2) , Quantity, etc)
1) « Expression of Inspection No. »
□□
OOOO
(1)
(2)
(3)
(1)
Factory Code
(2)
Date
First digit
: Year / Last digit of year
Second digit
: Month / Jan. to Sep.
1 to 9, Oct. to Dec.
O, N, D
Third, Fourth digit : Day
(3)
Serial No.
2) « Expression of RoHS marking »
ROHS – Y (
△
)
(1) (2)
(1)
RoHS regulation conformity parts.
(2)
MURATA classification number
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243A-9143A-01
(5)Outside package
P.5/6
These reels shall be packed in the corrugated cardboard package and the following items shall be marked
on a label and the label is stuck on the box.
(Customer name, Purchasing order number, Customer part number, MURATA part number,
RoHS discrimination(
2) ,Quantity, etc)
(6)Dimensions of reel and taping(leader-tape, trailer-tape)
8
-4. Specification of Outer Case
Outer Case Dimensions
Label
Standard Reel Quantity in Outer Case
(mm)
(Reel)
H
W
D
H
186
186
93
5
D
Above Outer Case size is typical. It depends on a quantity of an
W
order.
9.
Caution
9-1.Rating
Do not use products beyond the Operating Temperature Range and Rated Current.
9-2. Operating Environment
(1)Don’t use our products over the operating temperature, because it may make the deterioration of their electric
characteristics. In worst case, it may cause smoke from the adhesive because of the excessive heat.
(2)Do not use this product in the corrodible atmosphere (acidic gases, alkaline gases, chlorine, sulfur gases, organic
gases and etc.), because the atmosphere may cause deterioration of the electrical characteristic because of the
corrosion of the inner electrodes and outer electrodes and deterioration of the adhesive.
9-3. Mounting Density
Don’t be soldered on the substrate. This product must be mounted on the substrate with conductive glue.
Add special attention to radiating heat of some products with heating when mounting our product
near the products.
The excessive heat by other products may cause deterioration of our product’s characteristics or incorrect
operation, so
be sure to use our product under the operating temperature including the heat from other products.
9-4.Fail Safe
Be sure to provide an appropriate fail-safe function on your product to prevent from a second damage
that may be caused by the abnormal function or the failure of our products.
9-5.Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high
reliability for the prevention of defects which might directly cause damage to the third party’s life,
body or property.
MURATA MFG.CO., LTD.
Reference Only
Spec. No. JENF243A-9143A-01
P.6/6
(1)Aircraft equipment
(6)Disaster prevention / crime prevention equipment
(7)Traffic signal equipment
(8)Transportation equipment (trains,ships,etc.)
(9) Data-processing equipment
(10)Applications of similar complexity and /or reliability requirements
to the applications listed in the above
(2)Aerospace equipment
(3)Undersea equipment
(4)Power plant control equipment
(5)Medical equipment
10. Notice
This product is designed for adhesive with conductive glue, so we can’t guarantee for other connecting method.
If you plan to take another connecting method, please contact us.
10-1.
How to mount this product on a board with conductive glue
Please refer to the figure and table below which shows the method of recommended mounting
with conductive glue.
( We recommend using a mounting machine to mount this product.)
Please coat print pats with recommended conductive glue “PC3000” manufactured by Heraeus with using metal
mask and metal squeegee, and then mount our products on the substrates with a mount machine or human hand.
Please put the substrates into a oven (140
～
150
℃
) for 30 minutes in order to cure the adhesive. Please check
whether the chips and the substrates are connected with the conductive glue or not and there is
no electrically short of the conductive glue.
Conductive Glue
Print Pads
Board
①
Board
Ceramic Board or Alumina Board
30-50
μ
m
②
Thickness of Glue
③
Recommended Conductive Glue
PC3000
（
Manufactured by Heraeus
）
10-2.Storage Conditions
(1)Storage period
Use the products within 6 months after delivered.
Adhesive performance should be checked if this period is exceeded.
(2)Storage conditions
Products should be stored in the warehouse on the following conditions.
Temperature : -10°C to 40°C
Humidity
: 15% to 85% relative humidity
No rapid change on temperature and humidity
Don’t keep products in corrosive gases such as sulfur, chlorine gas or acid, or it may cause oxidization
of electrode, resulting in poor solderability.
Products should be stored on the palette for the prevention of the influence from humidity, dust and so on.
Products should be stored in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be stored under the airtight packaged condition.
(3)Delivery
Care should be taken when transporting or handling product to avoid excessive vibration
or mechanical shock.
11.
Note
(1)Please make sure that your product has been evaluated in view of your specifications with our product being
mounted to your product.
(2)You are requested not to use our product deviating from the agreed specifications.
(3) The contents of this reference specification are subject to change without advance notice. Please approve our
product specifications or transact the approval sheet for product specifications before ordering.
MURATA MFG.CO., LTD.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
