Nexperia-NX7002BKW-115
| Part # | Nexperia-NX7002BKW-115 |
Download  | Nexperia-NX7002BKW-115 |
NXB0101
Dual supply translating transceiver; auto direction sensing;
3-state
Rev. 3 — 23 August 2021
Product data sheet
1. General
description
The NXB0101 is a 1-bit, dual supply translating transceiver with auto direction sensing, that
enables bidirectional voltage level translation. It features two 1-bit input-output ports (A and B), one
output enable input (OE) and two supply pins (V
CC(A)
and V
CC(B)
). V
CC(A)
can be supplied at any
voltage between 1.2 V and 3.6 V and V
CC(B)
can be supplied at any voltage between 1.65 V and
5.5
V
,
m
aking the device suitable for translating between any of the low voltage nodes (1.2
V
,
1
.5
V
,
1.8
V
,
2
.5
V
,
3
.3 V and 5.0 V). Pin A and OE are referenced to V
CC(A)
and pins B is referenced to
V
CC(B)
. A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This
device is fully specified for partial power-down applications using I
OFF
. The I
OFF
circuitry disables
the output, preventing the damaging backflow current through the device when it is powered down.
2. Features
and benefits
•
Wide supply voltage range:
V
CC(A)
: 1.2 V to 3.6 V and V
CC(B)
: 1.65 V to 5.5 V
•
•
•
•
I
OFF
circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
ESD protection:
•
•
•
HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port
HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port
CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1.5 kV
•
•
•
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
Specified from −40 °C to +85 °C and −40 °C to +125 °C
3. Ordering
information
Table 1. Ordering information
Type number
Package
Temperature range
Name
Description
Version
SOT363
SOT886
NXB0101GW
NXB0101GM
-40 °C to +125 °C
-40 °C to +125 °C
SC-88
plastic surface-mounted package; 6 leads
XSON6
plastic extremely thin small outline package;
no leads; 6 terminals; body 1 × 1.45 × 0.5 mm
NXB0101GS
-40 °C to +125 °C
XSON6
extremely thin small outline package; no leads;
6 terminals; body 1.0 × 1.0 × 0.35 mm
SOT1202
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
4. Marking
Table 2. Marking
Type number
NXB0101GW
NXB0101GM
NXB0101GS
n1
n1
n1
[1] The
pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional
diagram
OE
4 kΩ
ONE
SHOT
ONE
SHOT
A
B
4 kΩ
V
V
CC(B)
CC(A)
aaa-030674
Fig. 1.
Functional diagram
6. Pinning
information
6.1. Pinning
NXB0101
NXB0101
NXB0101
V
1
2
3
6
5
4
V
V
1
2
3
6
5
4
V
CC(B)
CC(A)
CC(B)
CC(A)
1
2
3
6
5
4
V
V
CC(B)
CC(A)
GND
OE
B
GND
OE
GND
OE
B
A
A
B
A
aaa-030675
Transparent top view
aaa-030676
Transparent top view
aaa-033904
Fig. 2.
Pin configuration
SOT363 (SC-88)
Fig. 3.
Pin configuration
SOT886 (XSON6)
Fig. 4.
Pin configuration
SOT1202 (XSON6)
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
2 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
6.2. Pin
description
Table 3. Pin description
Symbol
Pin
1
Description
V
CC(A)
GND
A
supply voltage A
2
ground (0 V)
3
data input or output (referenced to V
CC(A)
)
)
B
4
data input or output (referenced to V
CC(B)
OE
5
output enable input (active HIGH; referenced to V
CC(A)
)
V
CC(B)
6
supply voltage B
7. Functional
description
Table 4. Function table
H = HIGH voltage level; L = LOW voltage level; X = don’t care; Z = high-impedance OFF-state.
Supply voltage
V
CC(A)
[1]
Input
OE
L
Input/output
V
CC(B)
A
B
1.2 V to 3.6 V
1.2 V to 3.6 V
GND
1.65 V to 5.5 V
1.65 V to 5.5 V
1.65 V to 5.5 V
GND
Z
Z
H
input or output
output or input
X
Z
Z
Z
Z
1.2 V to 3.6 V
X
[1] V
CC(A)
must be less than or equal to V
CC(B)
.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
3 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
8. Limiting
values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
-0.5
-0.5
-0.5
Max
+6.5
+6.5
+6.5
Unit
V
V
CC(A)
supply voltage A
V
CC(B)
supply voltage B
V
V
I
input voltage
OE
V
Power-down or 3-state mode
An, Bn
-0.5
-0.5
-0.5
+6.5
V
Active mode
An, Bn
V
CCI
+ 0.5
V
V
O
output voltage
Power-down or 3-state mode
A, B
+6.5
V
Active mode
A, B
-0.5
-50
-50
–
V
CCO
+ 0.5
V
I
IK
input clamping current
output clamping current
output current
V
I
< 0 V
–
–
mA
I
OK
I
O
V
O
< 0 V
mA
mA
mA
mA
°C
V
O
= 0 V to V
CCO
I
CC(A)
or I
CC(B)
±50
100
–
I
CC
I
GND
T
stg
P
tot
supply current
–
ground current
-100
-65
–
storage temperature
total power dissipation
+150
250
T
amb
= -40 °C to +125 °C
mW
[1] The
minimum input and minimum output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] V
CCI
is the supply voltage associated with the input.
[3] V
CCI
+ 0.5 V or V
CCO)
+ 0.5 V should not exceed 6.5
V
.
[4] V
CCO
is the supply voltage associated with the output.
[5] For
SOT886 (XSON6) package: P
tot
derates linearly with 3.3 mW/K above 74 °C.
For SOT1202 (XSON6) package: P
tot
derates linearly with 3.3 mW/K above 74 °C.
For SOT363 (SC-88) package: P
tot
derates linearly with 3.7 mW/K above 83 °C.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
4 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
9. Recommended
operating conditions
Symbol Parameter
Conditions
Min
1.2
1.65
0
Max
3.6
Unit
V
V
CC(A)
supply voltage A
V
CC(B)
supply voltage B
5.5
V
V
I
input voltage
OE
5.5
V
Power-down or 3-state mode
A
0
0
3.6
5.5
V
V
B
Active mode
A, B
0
V
CCI
V
V
O
output voltage
Power-down or 3-state mode
A
0
0
3.6
5.5
V
V
B
Active mode
A, B
0
-40
–
V
CCO
+125
40
V
T
amb
ambient temperature
°C
Δt/ΔV
input transition rise and fall rate
V
CC(A)
= 1.2 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
ns/V
[1] The
A and B sides of an unused I/O pair must be held in the same state, both at V
CCI
or both at GND.
[2] V
CC(A)
must be less than or equal to V
CC(B)
.
[3] V
CCI
is the supply voltage associated with the input.
[4] V
CCO
is the supply voltage associated with the output.
10. Static
characteristics
Table 7. Typical static characteristics
Symbol Parameter
Conditions
Min
Typ
Max Unit
V
OH
V
OL
I
I
HIGH-level
output voltage
A port; V
CC(A)
= 1.2 V; I
O
= -20 μA
–
1.1
–
V
LOW-level output
A port; V
CC(A)
= 1.2 V; I
O
= 20 μA
voltage
–
–
–
–
–
0.09
–
V
input leakage
current
OE input; V
I
= 0 V to 3.6 V; V
CC(A)
= 1.2 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
–
–
–
–
±1
±1
±1
±1
μA
μA
μA
μA
I
OZ
I
OFF
OFF-state output
A or B port; V
O
= 0 V to V
CCO
; V
CC(A)
= 1.2 V to 3.6 V;
current
V
CC(B)
= 1.65 V to 5.5 V
power-off
A port; V
I
or V
O
= 0 V to 3.6 V; V
CC(A)
= 0 V;
leakage current
V
CC(B)
= 0 V to 5.5 V
B port; V
I
or V
O
= 0 V to 5.5 V; V
CC(B)
= 0 V;
V
CC(A)
= 0 V to 3.6 V
C
I
input capacitance
OE input; V
CC(A)
= 1.2 V to 3.6 V; V
CC(B)
= 1.65 V to 5.5 V
–
–
–
1.6
4.0
7.5
–
–
–
pF
pF
pF
C
I/O
input/output
capacitance
A port; V
CC(A)
= 1.2 V to 3.6 V; V
CC(B)
= 1.65 V to 5.5 V
B port; V
CC(A)
= 1.2 V to 3.6 V; V
CC(B)
= 1.65 V to 5.5 V
[1] V
CC(A)
must be less than or equal to V
CC(B)
.
[2] V
CCO
is the supply voltage associated with the output.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
5 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Table 8. Typical supply current
At recommended operating conditions; voltages are referenced to GND (ground = 0 V); T
amb
= 25 °C.
V
CC(A)
V
CC(B)
Unit
1.8 V
2.5 V
3.3 V
5.0 V
I
CC(A)
10
10
10
–
I
CC(B)
10
10
10
–
I
CC(A)
10
10
10
10
–
I
CC(B)
10
10
10
10
–
I
CC(A)
10
I
CC(B)
20
I
CC(A)
10
I
CC(B)
1050
650
350
40
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
nA
nA
nA
nA
nA
10
10
10
10
10
10
10
10
10
–
–
10
10
10
10
Table 9. Static characteristics
Symbol Parameter
Conditions
-40 °C to +85 °C
-40 °C to +125 °C
Unit
Min
Max
Min
Max
V
IH
HIGH-level
input voltage
A or B port and OE input
V
CC(A)
= 1.2 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
0.65V
CCI
–
0.65V
CCI
–
V
V
V
IL
LOW-level
input voltage
A or B port and OE input
V
CC(A)
= 1.2 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
–
0.35V
CCI
–
0.35V
CCI
V
OH
HIGH-level
A or B port; I
O
= -20 μA
output voltage
A port; V
CC(A)
= 1.4 V to 3.6 V
B port; V
CC(B)
= 1.65 V to 5.5 V
A or B port; I
O
= 20 μA
V
CCO
– 0.4
V
CCO
– 0.4
–
–
V
CCO
– 0.4
V
CCO
– 0.4
–
–
V
V
V
OL
LOW-level
output voltage
A port; V
CC(A)
= 1.4 V to 3.6 V
B port; V
CC(B)
= 1.65 V to 5.5 V
–
–
–
0.4
0.4
±2
–
–
–
0.4
0.4
±5
V
V
I
I
input leakage
OE input; V
I
= 0 V to 3.6 V;
μA
current
V
CC(A)
= 1.2 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
I
OZ
OFF-state
A or B port; V
O
= 0 V or V
CCO
;
–
±2
–
±10
μA
output current
V
CC(A)
= 1.2 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
I
OFF
power-off
leakage
current
A port; V
I
or V
O
= 0 V to 3.6 V;
V
CC(A)
= 0 V; V
CC(B)
= 0 V to 5.5 V
–
–
±2
±2
–
–
±10
±10
μA
μA
B port; V
I
or V
O
= 0 V to 5.5 V;
V
CC(B)
= 0 V; V
CC(A)
= 0 V to 3.6 V
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
6 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Symbol Parameter
Conditions
-40 °C to +85 °C
-40 °C to +125 °C
Unit
Min
Max
Min
Max
I
CC
supply current
V
I
= 0 V or V
CCI
; I
O
= 0 A
I
CC(A)
OE = LOW;
V
CC(A)
= 1.4 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
–
–
3
3
–
–
15
20
μA
μA
OE = HIGH;
V
CC(A)
= 1.4 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
V
CC(A)
= 3.6 V; V
CC(B)
= 0 V
V
CC(A)
= 0 V; V
CC(B)
= 5.5 V
I
CC(B)
–
–
2
–
–
15
μA
μA
-2
-15
OE = LOW;
V
CC(A)
= 1.4 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
–
–
5
5
–
–
15
20
μA
μA
OE = HIGH;
V
CC(A)
= 1.4 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
V
CC(A)
= 3.6 V; V
CC(B)
= 0 V
V
CC(A)
= 0 V; V
CC(B)
= 5.5 V
I
CC(A)
+ I
CC(B)
–
–
-2
2
–
–
-15
15
μA
μA
V
CC(A)
= 1.4 V to 3.6 V;
V
CC(B)
= 1.65 V to 5.5 V
–
8
–
40
μA
[1] V
CC(A)
must be less than or equal to V
CC(B)
.
[2] V
CCI
is the supply voltage associated with the input.
[3] V
CCO
is the supply voltage associated with the output.
11. Dynamic
characteristics
Table 10. Typical dynamic characteristics for temperature 25 °C
Voltages are referenced to GND (ground = 0 V); for test circuit see
Fig. 8
; for waveforms see
Fig. 5
,
Fig. 6
and
Fig. 7
.
Symbol Parameter
Conditions
V
CC(B)
Unit
1.8 V
2.5 V
3.3 V
5.0 V
V
CC(A)
= 1.2 V; T
amb
= 25 °C
t
pd
propagation delay
A to B
7.5
6.6
0.5
8.3
6.0
5.6
0.5
8.3
9.4
69
5.5
5.1
0.5
8.3
9.3
83
5.2
4.9
0.5
8.3
8.8
68
ns
B to A
ns
t
en
enable time
disable time
OE to A, B
OE to A; no external load
OE to B; no external load
OE to A
μs
t
dis
ns
[2]
10.4
ns
81
81
ns
OE to B
69
83
68
ns
t
t
transition time
A port
4.3
2.7
15
4.3
2.1
13
4.3
1.8
13
4.4
1.5
13
ns
B port
ns
t
W
pulse width
data rate
data inputs
ns
f
data
70
80
80
80
Mbps
[1] t
pd
is the same as t
PLH
and t
PHL
; t
en
is the same as t
PZL
and t
PZH
; t
dis
is the same as t
PLZ
and t
PHZ
; t
t
is the same as t
THL
and t
TLH
[2] Delay
between OE going LOW and when the outputs are actually disabled.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
7 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Table 11. Dynamic characteristics for temperature range -40 °C to +85 °C
Voltages are referenced to GND (ground = 0 V); for test circuit see
Fig. 8
; for waveforms see
Fig. 5
,
Fig. 6
and
Fig. 7
.
Symbol Parameter
Conditions
V
CC(B)
Unit
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5.0 V ± 0.5 V
Min
Max
Min Max Min Max Min Max
V
CC(A)
= 1.5 V ± 0.1 V
t
pd
propagation
delay
A to B
1.4
0.9
–
12.9
14.2
1.0
17.9
21.0
100
150
5.1
4.7
–
1.2
0.7
–
10.1
12.0
1.0
17.9
16.6
100
105
5.1
3.2
–
1.1
0.4
–
10.0
11.7
1.0
17.9
15.1
100
150
5.1
2.5
–
0.8
0.3
–
9.9 ns
B to A
13.7 ns
1.0 μs
17.9 ns
14.4 ns
100 ns
105 ns
5.1 ns
2.7 ns
t
en
enable time
disable time
OE to A, B
t
dis
1.0
1.0
–
1.0
1.0
–
1.0
1.0
–
OE to A
OE to B
–
–
–
–
–
t
t
transition time
A port
B port
0.9
0.9
25
–
0.9
0.6
25
–
0.9
0.5
25
–
0.9
0.4
25
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
40
40
40
40 Mbps
V
CC(A)
= 1.8 V ± 0.15 V
t
pd
propagation
delay
A to B
1.6
1.5
–
11.0
12.0
1.0
14.7
18.2
120
150
4.1
4.7
–
1.4
1.3
–
7.7
8.4
1.0
14.7
14.5
120
105
4.1
3.2
–
1.3
1.0
–
6.8
7.6
1.0
14.7
13.7
120
150
4.1
2.5
–
1.2
0.9
–
6.5 ns
7.1 ns
1.0 μs
14.7 ns
12.7 ns
120 ns
105 ns
4.1 ns
2.7 ns
B to A
t
en
enable time
disable time
OE to A, B
t
dis
1.0
1.0
–
1.0
1.0
–
1.0
1.0
–
OE to A
OE to B
–
–
–
–
–
t
t
transition time
A port
B port
0.8
0.9
20
–
0.8
0.6
17
–
0.8
0.5
17
–
0.8
0.4
17
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
49
60
60
60 Mbps
V
CC(A)
= 2.5 V ± 0.2 V
t
pd
propagation
delay
A to B
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.1
1.2
–
6.3
6.6
1.0
9.7
12.9
85
1.0
1.1
–
5.2
5.1
1.0
9.7
12.0
85
0.9
0.9
–
4.7 ns
4.4 ns
1.0 μs
9.7 ns
11.0 ns
85 ns
100 ns
3.0 ns
2.7 ns
B to A
t
en
enable time
disable time
OE to A, B
t
dis
OE to A
1.0
1.0
–
1.0
1.0
–
1.0
1.0
–
OE to B
–
105
3.0
3.2
–
–
150
3.0
2.5
–
–
t
t
transition time
A port
B port
0.7
0.7
12
–
0.7
0.5
10
–
0.7
0.4
10
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
85
100
100 Mbps
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
8 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Symbol Parameter
Conditions
V
CC(B)
Unit
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5.0 V ± 0.5 V
Min
Max
Min Max Min Max Min Max
V
CC(A)
= 3.3 V ± 0.3 V
t
pd
propagation
delay
A to B
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.9
1.0
–
4.7
4.9
1.0
9.4
11.3
125
150
2.5
2.5
–
0.8
0.9
–
4.0 ns
B to A
3.8 ns
1.0 μs
9.4 ns
10.4 ns
125 ns
100 ns
2.5 ns
2.7 ns
t
en
enable time
disable time
OE to A, B
t
dis
OE to A
1.0
1.0
–
1.0
1.0
–
OE to B
–
–
t
t
transition time
A port
B port
0.7
0.5
10
–
0.7
0.4
10
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
100
100 Mbps
[1] t
pd
is the same as t
PLH
and t
PHL
; t
en
is the same as t
PZL
and t
PZH
; t
dis
is the same as t
PLZ
and t
PHZ
; t
t
is the same as t
THL
and t
TLH
[2] Delay
between OE going LOW and when the outputs are actually disabled.
Table 12. Dynamic characteristics for temperature range -40 °C to +125 °C
Voltages are referenced to GND (ground = 0 V); for test circuit see
Fig. 8
; for waveforms see
Fig. 5
,
Fig. 6
and
Fig. 7
.
Symbol Parameter
Conditions
V
CC(B)
Unit
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5.0 V ± 0.5 V
Min
Max
Min Max Min Max Min Max
V
CC(A)
= 1.5 V ± 0.1 V
t
pd
propagation
delay
A to B
1.4
0.9
–
15.9
17.2
1.0
18.3
21.8
105
155
7.1
6.5
–
1.2
0.7
–
13.1
15.0
1.0
18.3
17.7
105
110
7.1
5.2
–
1.1
0.4
–
13.0
14.7
1.0
18.3
16.1
105
155
7.1
4.8
–
0.8
0.3
–
12.9 ns
B to A
16.7 ns
1.0 μs
18.3 ns
15.2 ns
105 ns
105 ns
7.1 ns
4.7 ns
t
en
enable time
disable time
OE to A, B
t
dis
1.0
1.0
–
1.0
1.0
–
1.0
1.0
–
OE to A
OE to B
–
–
–
–
–
t
t
transition time
A port
B port
0.9
0.9
25
–
0.9
0.6
25
–
0.9
0.5
25
–
0.9
0.4
25
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
40
40
40
40 Mbps
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
9 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Symbol Parameter
Conditions
V
CC(B)
Unit
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5.0 V ± 0.5 V
Min
Max
Min Max Min Max Min Max
V
CC(A)
= 1.8 V ± 0.15 V
t
pd
propagation
delay
A to B
1.6
1.5
–
14.0
15.0
1.0
15.0
19.8
125
150
6.2
5.8
–
1.4
1.3
–
10.7
11.4
1.0
15.0
15.3
125
105
6.1
5.2
–
1.3
1.0
–
9.8
10.6
1.0
15.0
14.5
125
150
6.1
4.8
–
1.2
0.9
–
9.5 ns
B to A
10.1 ns
1.0 μs
15.0 ns
13.5 ns
125 ns
105 ns
6.1 ns
4.7 ns
t
en
enable time
disable time
OE to A, B
t
dis
1.0
1.0
–
1.0
1.0
–
1.0
1.0
–
OE to A
OE to B
–
–
–
–
–
t
t
transition time
A port
B port
0.8
0.9
22
–
0.8
0.6
19
–
0.8
0.5
19
–
0.8
0.4
19
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
45
55
55
55 Mbps
V
CC(A)
= 2.5 V ± 0.2 V
t
pd
propagation
delay
A to B
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.1
1.2
–
9.3
9.6
1.0
10.1
13.5
85
1.0
1.1
–
8.2
8.1
1.0
10.1
12.7
85
0.9
0.9
–
7.7 ns
7.4 ns
1.0 μs
10.1 ns
11.7 ns
85 ns
100 ns
5.0 ns
4.7 ns
B to A
t
en
enable time
disable time
OE to A, B
t
dis
OE to A
1.0
1.0
–
1.0
1.0
–
1.0
1.0
–
OE to B
–
105
5.0
4.6
–
–
150
5.0
4.8
–
–
t
t
transition time
A port
B port
0.7
0.7
14
–
0.7
0.5
13
–
0.7
0.4
10
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
75
80
100 Mbps
V
CC(A)
= 3.3 V ± 0.3 V
t
pd
propagation
delay
A to B
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
0.9
1.0
–
7.7
7.9
1.0
9.9
12.1
125
150
4.5
4.1
–
0.8
0.9
–
7.0 ns
6.8 ns
1.0 μs
9.9 ns
10.9 ns
125 ns
150 ns
4.5 ns
4.7 ns
B to A
t
en
enable time
disable time
OE to A, B
t
dis
OE to A
1.0
1.0
–
1.0
1.0
–
OE to B
–
–
t
t
transition time
A port
B port
0.7
0.5
10
–
0.7
0.4
10
–
t
W
pulse width
data rate
data inputs
–
ns
f
data
100
100 Mbps
[1] t
pd
is the same as t
PLH
and t
PHL
; t
en
is the same as t
PZL
and t
PZH
; t
dis
is the same as t
PLZ
and t
PHZ
; t
t
is the same as t
THL
and t
TLH
[2] Delay
between OE going LOW and when the outputs are actually disabled.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
10 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Table 13. Typical power dissipation capacitance
Symbol Parameter
Conditions
V
CC(A)
1.8 V
V
CC(B)
1.8 V
Unit
1.2 V
1.8 V
1.2 V
5.0 V
1.5 V
1.8 V
2.5 V
2.5 V
2.5 V
5.0 V
3.3 V
3.3 V
to
5.0 V
T
amb
= 25 °C
C
PD
power
dissipation
capacitance
outputs enabled; OE = V
CC(A)
A port: (direction A to B)
A port: (direction B to A)
B port: (direction A to B)
B port: (direction B to A)
outputs disabled; OE = GND
A port: (direction A to B)
A port: (direction B to A)
B port: (direction A to B)
B port: (direction B to A)
6
8
5
8
6
8
6
8
6
8
5
8
5
8
pF
pF
pF
pF
26
23
30
28
26
22
26
22
27
22
30
26
30
26
0.05
0.00
0.00
0.06
0.05
0.00
0.02
0.09
0.05
0.00
0.00
0.06
0.09
0.00
0.00
0.06
0.08
0.00
0.00
0.06
0.08
0.00
0.00
0.07
0.06 pF
0.00 pF
0.00 pF
0.07 pF
[1] C
PD
is used to determine the dynamic power dissipation (P
D
in μW).
P
D
= C
PD
x V
CC
2
x f
i
x N + Σ(C
L
x V
CC
2
x f
o
) where:
f
i
= input frequency in MHz; f
o
= output frequency in MHz; C
L
= load capacitance in pF;
V
CC
= supply voltage in V; N = number of inputs switching; Σ(C
L
x V
CC
2
x f
o
) = sum of the outputs.
[2] f
i
= 10 MHz; V
I
= GND to V
CC
; t
r
= t
f
= 1 ns; C
L
= 0 pF; R
L
= ∞ Ω.
11.1. Waveforms
and test circuit
V
I
V
A, B input
GND
M
t
t
PLH
PHL
V
OH
90 %
B, A output
V
V
M
10 %
OL
t
t
THL
TLH
001aan315
V
OL
and V
OH
are typical output voltage levels that occur with the output load.
Fig. 5.
The data input (An, Bn) to data output (Bn, An) propagation delay times
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
11 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
V
I
V
OE input
M
GND
t
PLZ
V
CCO
output
LOW-to-OFF
V
X
V
OL
t
PHZ
V
OH
V
Y
output
HIGH-to-OFF
GND
outputs
enabled
outputs
disabled
aaa-029700
V
OL
and V
OH
are typical output voltage levels that occur with the output load.
V
CCO
is the supply voltage associated with the output.
Fig. 6.
Disable times
V
I
V
OE input
M
GND
V
I
A, B
input
GND
(1)
en
t
V
CCO
A, B
output
V
M
V
OL
aaa-030677
(1) The enable time (t
en
) indicates the amount of time the user must allow for one one-shot circuitry to become
V
OL
is a typical output voltage level that occur with the output load.
V
CCO
is the supply voltage associated with the output.
Fig. 7.
Enable times
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
12 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Supply voltage
V
CCO
Input
Output
V
M
V
M
V
X
V
Y
1.2 V
0.5V
CCI
0.5V
CCI
0.5V
CCI
0.5V
CCI
0.5V
CCI
0.5V
CCI
0.5V
CCO
0.5V
CCO
0.5V
CCO
0.5V
CCO
0.5V
CCO
0.5V
CCO
V
OL
+ 0.1 V
V
OL
+ 0.1 V
V
OL
+ 0.15 V
V
OL
+ 0.15 V
V
OL
+ 0.3 V
V
OL
+ 0.3 V
V
OH
– 0.1 V
V
OH
– 0.1 V
V
OH
– 0.15 V
V
OH
– 0.15 V
V
OH
– 0.3 V
V
OH
– 0.3 V
1.5 V ± 0.1 V
1.8 V ± 0.15 V
2.5 V ± 0.2 V
3.3 V ± 0.3 V
5.0 V ± 0.5 V
[1] V
CCI
is the supply voltage associated with the input and V
CCO
is the supply voltage associated with the output.
t
W
V
I
90 %
negative
pulse
V
V
V
M
M
10 %
0 V
t
t
r
f
t
t
r
f
V
I
90 %
positive
pulse
V
M
M
10 %
0 V
t
W
V
EXT
V
V
CC(B)
CC(A)
R
L
V
V
O
I
G
DUT
C
R
L
L
aaa-029721
All input pulses are supplied by generators having the following characteristics:
PRR ≤ 10 MHz; Z
O
= 50 Ω; dV/dt ≥ 1.0 V/ns.
R
L
= Load resistance.
C
L
= Load capacitance including jig and probe capacitance.
V
EXT
= External voltage for measuring switching times.
Fig. 8.
Test circuit for measuring switching times
Table 15. Test data
Supply voltage
V
CC(A)
Input
Load
C
L
V
EXT
V
CC(B)
V
I
[1]
Δt/ΔV
R
L
[2]
t
PLH
, t
PHL
t
en
t
PHZ
t
PLZ
[3]
1.2 V to 3.6 V
1.65 V to 5.5 V
V
CCI
≤ 1.0 ns/V
15 pF
50 kΩ, 1 MΩ
open
open
open
2V
CCO
[1] V
CCI
is the supply voltage associated with the input.
[2] For
measuring data rate, pulse width, propagation delay, output rise and fall time and enable time, R
L
= 1 MΩ.
For measuring disable time, R
L
= 50 kΩ.
[3] V
CCO
is the supply voltage associated with the output.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
13 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
12. Application
information
12.1. Applications
Voltage level-translation applications. The NXB0101 can be used to interface between devices or
NXB0101.
1.8 V
3.3 V
1.8 V
V
V
3.3 V
CC(A)
CC(B)
0.1 µF
0.1 µF
OE
SYSTEM
CONTROLLER
NXB0101
SYSTEM
DATA
A
B
DATA
GND
aaa-030678
Fig. 9.
Typical operating circuit
12.2. Architecture
signal to control the direction of data flow from A to B or from B to A. In a static state, the output
drivers of the NXB0101 can maintain a defined output level, but the output architecture is designed
to be weak, so that they can be overdriven by an external driver when data on the bus starts
flowing in the opposite direction. The output one shots detect rising or falling edges on the A or
B ports. During a rising edge, the one shots turn on the PMOS transistors (T1, T3) for a short
duration, accelerating the low-to-high transition. Similarly, during a falling edge, the one shots
turn on the NMOS transistors (T2, T4) for a short duration, accelerating the high-to-low transition.
During output transitions the typical output impedance is 70 Ω at V
CCO
= 1.2 V to 1.8
V
,
5
0 Ω at
V
CCO
= 1.8 V to 3.3 V and 40 Ω at V
CCO
= 3.3 V to 5.0
V
.
V
V
CC(B)
CC(A)
ONE
SHOT
T1
4 kΩ
T2
ONE
SHOT
B
A
ONE
SHOT
T3
4 kΩ
T4
ONE
SHOT
001aal921
Fig. 10.
Architecture of NXB0101 I/O cell (one channel)
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
14 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
12.3. Input
driver requirements
For correct operation, the device driving the data I/Os of the NXB0101 must have a minimum drive
I
I
V /4
kΩ
T
V
I
– (V
– V )/4
kΩ
D
T
001aal922
V
T
: input threshold voltage of the NXB0101 (typically V
CCI
/ 2).
V
D
: supply voltage of the external driver.
Fig. 11.
Typical input current versus input voltage graph
12.4. Output
load considerations
The maximum lumped capacitive load that can be driven is dependant upon the one-shot pulse
duration. In cases with very heavy capacitive loading there is a risk that the output will not reach
the positive rail within the one-shot pulse duration.
T
o
a
void excessive capacitive loading and to
ensure correct triggering of the one-shot it’s recommended to use short trace lengths and low
capacitance connectors on NXS0101 PCB layouts.
T
o
e
nsure low impedance termination and
avoid output signal oscillations and one-shot re-triggering, the length of the PCB trace should be
such that the round trip delay of any reflection is within the one-shot pulse duration.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
15 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
12.5. Power
up
During operation V
CC(A)
must never be higher than V
CC(B)
, however during power-up
V
CC(A)
≥ V
CC(B)
does not damage the device, so either power supply can be ramped up first. There
is no special power-up sequencing required. The NXB0101 includes circuitry that disables all
output ports when either V
CC(A)
or V
CC(B)
is switched off.
12.6. Enable
and disable
An output enable input (OE) is used to disable the device. Setting OE = LOW causes all I/Os to
assume the high-impedance OFF-state. The disable time (t
dis
with no external load) indicates
the delay between when OE goes LOW and when outputs actually become disabled. The enable
time (t
en
) indicates the amount of time the user must allow for one one-shot circuitry to become
operational after OE is taken HIGH.
T
o
e
nsure the high-impedance OFF-state during power-up or
power-down, pin OE should be tied to GND through a pull-down resistor, the minimum value of the
resistor is determined by the current-sourcing capability of the driver.
12.7. Pull-up
or pull-down resistors on I/O lines
As mentioned previously the NXB0101 is designed with low static drive strength to drive capacitive
loads of up to 70 p
F
. To
a
void output contention issues, any pull-up or pull-down resistors used
must be kept higher than 50 kΩ. For this reason the NXB0101 is not recommended for use in
open drain driver applications such as 1-Wire or I
2
C. For these applications, the NXS0101 level
translator is recommended.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
16 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
13. Package
outline
Plastic surface-mounted package; 6 leads
SOT363
D
B
E
A
X
y
H
v
M
A
E
6
5
4
Q
pin 1
index
A
A
1
1
2
3
c
e
1
b
L
w
M
B
p
p
e
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
A
1
UNIT
A
b
p
c
D
e
e
H
L
Q
v
w
y
E
p
1
E
max
0.30
0.20
1.1
0.8
0.25
0.10
2.2
1.8
1.35
1.15
2.2
2.0
0.45
0.15
0.25
0.15
mm
0.1
1.3
0.65
0.2
0.2
0.1
REFERENCES
JEDEC JEITA
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
04-11-08
06-03-16
SOT363
SC-88
Fig. 12.
Package outline SOT363 (SC-88)
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
17 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm
SOT886
b
1
2
3
4x
(2)
L
L
1
e
6
5
4
e
e
1
1
6x
(2)
A
A
1
D
E
terminal 1
index area
0
1
2 mm
scale
Dimensions (mm are the original dimensions)
(1)
Unit
A
A
b
D
E
e
e
L
L
1
1
1
max 0.5 0.04
0.25 1.50 1.05
0.35 0.40
0.30 0.35
0.27 0.32
nom
min
0.20 1.45 1.00
0.6
0.17 1.40 0.95
mm
0.5
Notes
1. Including plating thickness.
2. Can be visible in some manufacturing processes.
sot886_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
MO-252
JEITA
04-07-22
12-01-05
SOT886
Fig. 13.
Package outline SOT886 (XSON6)
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
18 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
XSON6: extremely thin small outline package; no leads;
6 terminals; body 1.0 x 1.0 x 0.35 mm
SOT1202
b
3
(2)
1
2
(4×)
L
L
1
e
6
5
4
e
e
1
1
(2)
(6×)
A
1
A
D
E
terminal 1
index area
0
L
0.5
1 mm
scale
Dimensions
Unit
(1)
A
A
b
D
E
e
e
1
L
1
1
max 0.35 0.04 0.20 1.05 1.05
0.35 0.40
0.15 1.00 1.00 0.55 0.35 0.30 0.35
0.12 0.95 0.95
0.27 0.32
mm nom
min
Note
1. Including plating thickness.
2. Visible depending upon used manufacturing technology.
sot1202_po
References
Outline
version
European
projection
Issue date
IEC
JEDEC
JEITA
10-04-02
10-04-06
SOT1202
Fig. 14.
Package outline SOT1202 (XSON6)
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
19 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
14. Abbreviations
Table 16. Abbreviations
Acronym
Description
CDM
CMOS
DUT
ESD
HBM
MM
Charged Device Model
Complementary Metal Oxide Semiconductor
Device Under
T
e
st
Electro Static Discharge
Human Body Model
Machine Model
15. Revision
history
Table 17. Revision history
Document ID
Release date
Data sheet status
20210823 Product
data sheet
Type number NXB0101GW (SOT363-1/SC-88) added.
20201113 Product
data sheet
20200406 Product
data sheet
Change notice
Supersedes
NXB0101 v.3
Modifications:
–
NXB0101 v.2
•
NXB0101 v.2
Modifications:
–
NXB0101 v.1.1
–
•
NXB0101 v.1.1
–
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
20 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
injury, death or severe property or environmental damage. Nexperia and its
suppliers accept no liability for inclusion and/or use of Nexperia products in
such equipment or applications and therefore such inclusion and/or use is at
the customer’s own risk.
16. Legal
information
Quick reference data
— The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Data sheet status
Document status
Product
Definition
Applications
— Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes no representation
or warranty that such applications will be suitable for the specified use
Objective [short]
data sheet
Development
This document contains data from
the objective specification for
product development.
without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using Nexperia products, and Nexperia accepts no liability for
any assistance with applications or customer product design. It is customer’s
sole responsibility to determine whether the Nexperia product is suitable
and fit for the customer’s applications and products planned, as well as
for the planned application and use of customer’s third party customer(s).
Customers should provide appropriate design and operating safeguards to
minimize the risks associated with their applications and products.
Preliminary [short]
data sheet
Qualification
Production
This document contains data from
the preliminary specification.
Product [short]
data sheet
This document contains the product
specification.
[1] Please
consult the most recently issued document before initiating or
completing a design.
Nexperia does not accept any liability related to any default, damage, costs
or problem which is based on any weakness or default in the customer’s
applications or products, or the application or use by customer’s third party
customer(s). Customer is responsible for doing all necessary testing for the
customer’s applications and products using Nexperia products in order to
avoid a default of the applications and the products or of the application or
use by customer’s third party customer(s). Nexperia does not accept any
liability in this respect.
[2] The
term ‘short data sheet’ is explained in section “Definitions”.
[3] The
product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
Definitions
Limiting values
— Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Draft
— The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any representations or
warranties as to the accuracy or completeness of information included herein
and shall have no liability for the consequences of use of such information.
Short data sheet
— A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the relevant
full data sheet, which is available on request via the local Nexperia sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of commercial sale
— Nexperia products are
sold subject to the general terms and conditions of commercial sale, as
in a valid written individual agreement. In case an individual agreement is
concluded only the terms and conditions of the respective agreement shall
apply. Nexperia hereby expressly objects to applying the customer’s general
terms and conditions with regard to the purchase of Nexperia products by
customer.
Product specification
— The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and customer have explicitly
agreed otherwise in writing. In no event however, shall an agreement be
valid in which the Nexperia product is deemed to offer functions and qualities
beyond those described in the Product data sheet.
No offer to sell or license
— Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control
— This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Disclaimers
Limited warranty and liability
— Information in this document is believed
to be accurate and reliable. However, Nexperia does not give any
representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no responsibility
for the content in this document if provided by an information source outside
of Nexperia.
Non-automotive qualified products
— Unless this data sheet expressly
states that this specific Nexperia product is automotive qualified, the
product is not suitable for automotive use. It is neither qualified nor tested in
accordance with automotive testing or application requirements. Nexperia
accepts no liability for inclusion and/or use of non-automotive qualified
products in automotive equipment or applications.
In no event shall Nexperia be liable for any indirect, incidental, punitive,
special or consequential damages (including – without limitation – lost
profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without Nexperia’s warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
Nexperia’s specifications such use shall be solely at customer’s own risk,
and (c) customer fully indemnifies Nexperia for any liability, damages or failed
product claims resulting from customer design and use of the product for
automotive applications beyond Nexperia’s standard warranty and Nexperia’s
product specifications.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards customer
for the products described herein shall be limited in accordance with the
T
e
rms and conditions of commercial sale of Nexperia.
Translations
— A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
Right to make changes
— Nexperia reserves the right to make changes
to information published in this document, including without limitation
specifications and product descriptions, at any time and without notice. This
document supersedes and replaces all information supplied prior to the
publication hereof.
Trademarks
Suitability for use
— Nexperia products are not designed, authorized or
warranted to be suitable for use in life support, life-critical or safety-critical
systems or equipment, nor in applications where failure or malfunction
of an Nexperia product can reasonably be expected to result in personal
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
21 / 22
Nexperia
NXB0101
Dual supply translating transceiver; auto direction sensing; 3-state
Contents
©
Nexperia B.
V
.
2
021. All rights reserved
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release: 23 August 2021
©
NXB0101
All information provided in this document is subject to legal disclaimers.
Nexperia B.
V
.
2
021. All rights reserved
Product data sheet
Rev. 3 — 23 August 2021
22 / 22
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
