NXP-Semicon-IP4303CX4-P
| Part # | NXP-Semicon-IP4303CX4-P |
Download  | NXP-Semicon-IP4303CX4-P |
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
14 October 2016
Product data sheet
1. General
description
Very low capacitance bidirectional ElectroStatic Discharge (ESD) protection diode designed to
protect one signal line from the damage caused by ESD and other transients. The device is housed
in a leadless ultra small DFN1006-2 (SOD882) Surface-Mounted Device (SMD) plastic package.
2. Features
and benefits
•
Bidirectional ESD protection of one line
•
•
•
•
•
•
•
Low diode capacitance C
d
= 17 pF
Rated peak pulse power: P
PPM
= 290 W
Ultra low leakage current I
RM
< 1 nA
ESD protection up to 30 kV
IEC 61000-4-2; level 4 (ESD)
IEC 61000-4-5 (surge); I
PPM
= 7.8 A
AEC-Q101 qualified
3. Applications
•
•
•
•
•
Computers and peripherals
Audio and video equipment
Cellular handsets and accessories
Portable electronics
Communication systems
4. Quick
reference data
Table 1. Quick reference data
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
V
RWM
reverse standoff
voltage
T
amb
= 25 °C
–
–
12
V
C
d
diode capacitance
f = 1 MHz; V
R
= 0 V; T
amb
= 25 °C
–
17
25
pF
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
5. Pinning
information
Table 2. Pinning information
Pin
1
Symbol Description
Simplified outline
Graphic symbol
K
K
cathode
cathode
1
2
1
2
2
sym045
Transparent
top view
DFN1006-2 (SOD882)
6. Ordering
information
Table 3. Ordering information
Type number
Package
Name
Description
Version
PESD12VV1BL
DFN1006-2
DFN1006-2: leadless ultra small plastic package; 2 terminals
SOD882
7. Marking
Table 4. Marking codes
Type number
Marking code
PESD12VV1BL
MW
8. Limiting
values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
P
PPM
I
PPM
T
j
Parameter
Conditions
Min
Max
Unit
W
rated peak pulse power
–
290
7.8
rated peak pulse current
t
p
= 8/20 µs
junction temperature
–
A
–
150
150
150
°C
°C
°C
T
amb
T
stg
ambient temperature
-55
-65
storage temperature
ESD maximum ratings
V
ESD
electrostatic discharge
voltage
IEC 61000-4-2; contact discharge
machine model
–
–
–
30
kV
V
400
10
human body model (MIL-STD-883)
kV
[1] Device
stressed with non-repetitive current pulses (8/20 µs exponential decay waveform according to IEC 61000-4-5 and IEC
61643-321).
[2] Device
stressed with ten non-repetitive ESD pulses.
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
2 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
001aaa631
001aaa630
120
I
PP
100 %
90 %
100 % I
; 8 µs
PP
I
PP
(%)
80
-t
e
50 % I
; 20 µs
PP
40
10 %
0
t
t =
0.6 ns to 1 ns
r
0
10
20
30
40
t
(µs)
p
30 ns
60 ns
Fig. 1.
8/20 µs pulse waveform according to
IEC 61000-4-5 and IEC 61643-321
Fig. 2.
ESD pulse waveform according to
IEC 61000-4-2
9. Characteristics
Table 6. Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
V
RWM
reverse standoff
voltage
T
amb
= 25 °C
–
–
12
V
V
BR
I
RM
breakdown voltage
I
R
= 5 mA; T
amb
= 25 °C
14.6
–
15.7
1
16.8
10
V
reverse leakage
current
V
RWM
= 12 V; T
amb
= 25 °C
nA
C
d
diode capacitance
clamping voltage
f = 1 MHz; V
R
= 0 V; T
amb
= 25 °C
I
PP
= 1 A; T
amb
= 25 °C
–
–
–
–
17
–
25
22
38
–
pF
V
V
CL
I
PPM
= 7.8 A; T
amb
= 25 °C
I
R
= 10 A; T
amb
= 25 °C
–
V
R
dyn
dynamic resistance
0.7
Ω
[1] Device
stressed with 8/20 μs exponential decay waveform according to IEC 61000-4-5 and IEC 61643-321.
[2] Non-repetitive
current pulse, Transmission Line Pulse (TLP) t
p
= 100 ns; square pulse; ANSI / ESD STM5.5.1-2008.
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
3 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
aaa-002723
aaa-002724
3
10
20
C
d
(pF)
P
PP
(W)
15
10
5
2
10
10
1
0
-4
10
-3
-2
10
10
0
2
4
6
8
10
(V)
12
t
(s)
V
R
p
f = 1 MHz; T
amb
= 25 °C
T
amb
= 25 °C
Fig. 4.
Diode capacitance as a function of reverse
voltage; typical values
Fig. 3.
Rated peak pulse power as a function of square
pulse duration; maximum values
I
PPM
I
PP
I
I
R
RM
-V
-V
-V
BR RWM
CL
-I
-I
V
V
V
RM
R
RWM BR CL
–
+
-I
-I
PP
006aab325
PPM
Fig. 5.
V-I characteristics for a bidirectional ESD protection diode
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
4 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
ESD TESTER
4 GHz DIGITAL
OSCILLOSCOPE
RG 223/U
50 Ω coax
R
d
450 Ω
10x
ATTENUATOR
C
s
50 Ω
DUT
(DEVICE
UNDER
TEST)
IEC 61000-4-2 network
= 150 pF; R
= 330 Ω
C
s
d
vertical scale = 20 V/div
vertical scale = 2 kV/div
horizontal scale = 50 ns/div
horizontal scale = 10 ns/div
GND
GND
unclamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
clamped +8 kV ESD pulse waveform
(IEC 61000-4-2 network)
vertical scale = 20 V/div
horizontal scale = 50 ns/div
vertical scale = 2 kV/div
horizontal scale = 10 ns/div
GND
GND
unclamped -8 kV ESD pulse waveform
(IEC 61000-4-2 network)
clamped -8 kV ESD pulse waveform
(IEC 61000-4-2 network)
aaa-002726
Fig. 6.
ESD clamping test setup and waveforms
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
5 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
10. Application
information
The device is designed for the protection of one bidirectional data line from surge pulses and ESD
damage. The device is suitable on lines where the signal polarities are both positive and negative
with respect to ground.
line to be protected
ESD protection diode
GND
aaa-002737
Fig. 7.
Application diagram
Circuit board layout and protection device placement
Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge
transients. The following guidelines are recommended:
1.
Place the device as close to the input terminal or connector as possible.
2.
Minimize the path length between the device and the protected line.
3.
Keep parallel signal paths to a minimum.
4.
Avoid running protected conductors in parallel with unprotected conductors.
5.
Minimize all Printed-Circuit Board (PCB) conductive loops including power and ground loops.
6.
Minimize the length of the transient return path to ground.
7.
Avoid using shared transient return paths to a common ground point.
8.
Use ground planes whenever possible. For multilayer PCBs, use ground vias.
11. Test
information
Quality information
This product has been qualified in accordance with the Automotive Electronics Council (AEC)
standard Q101 – Stress test qualification for discrete semiconductors, and is suitable for use in
automotive applications.
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
6 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
12. Package
outline
0.50
0.46
0.62
0.55
2
1
0.30
0.22
1.02
0.95
0.65
0.30
0.22
0.55
0.47
cathode marking on top side (if applicable)
03-04-17
Dimensions in mm
Fig. 8.
Package outline DFN1006-2 (SOD882)
13. Soldering
1.3
0.7
R0.05 (8×)
solder lands
solder resist
0.6 0.7 0.8
(2×) (2×) (2×)
0.9
solder paste
occupied area
0.3
(2×)
Dimensions in mm
0.4
(2×)
0.5
sod882_fr
(2×)
Fig. 9.
Reflow soldering footprint for DFN1006-2 (SOD882)
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
7 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
14. Revision
history
Table 7. Revision history
Data sheet ID
Release date
20161014
Data sheet status
Change notice
Supersedes
PESD12VV1BL v.3
Modifications:
Product data sheet
–
PESD12VV1BL v.2
•
Deleted section “Packing information”
PESD12VV1BL v.2
PESD12VV1BL v.1
20130318
20120403
Product data sheet
Product data sheet
–
–
PESD12VV1BL v.1
–
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
8 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s
aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the
Terms and conditions of commercial sale
of Nexperia.
15. Legal
information
Right to make changes
— Nexperia reserves the right to
make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Data sheet status
Document
Product
Definition
Suitability for use in automotive applications
— This Nexperia
product has been qualified for use in automotive
Objective
[short] data
sheet
Development This
document contains data from
the objective specification for product
development.
applications. Unless otherwise agreed in writing, the product is not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of a Nexperia product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. Nexperia and its suppliers accept no liability for
inclusion and/or use of Nexperia products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Preliminary
[short] data
sheet
Qualification This
document contains data from the
preliminary specification.
Product
[short] data
sheet
Production
This document contains the product
specification.
Quick reference data
— The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
[1] Please
consult the most recently issued document before initiating or
completing a design.
[2] The
term ‘short data sheet’ is explained in section “Definitions”.
[3] The
product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
Applications
— Applications that are described herein for any of these
products are for illustrative purposes only. Nexperia makes
no representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their
applications and products using Nexperia products, and Nexperia
accepts no liability for any assistance with applications or
customer product design. It is customer’s sole responsibility to determine
whether the Nexperia product is suitable and fit for the
customer’s applications and products planned, as well as for the planned
application and use of customer’s third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products.
Definitions
Preview
— The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
Nexperia does not give any representations or warranties as to
the accuracy or completeness of information included herein and shall have
no liability for the consequences of use of such information.
Draft
— The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. Nexperia does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default
in the customer’s applications or products, or the application or use by
customer’s third party customer(s). Customer is responsible for doing all
necessary testing for the customer’s applications and products using Nexperia
products in order to avoid a default of the applications
and the products or of the application or use by customer’s third party
customer(s). Nexperia does not accept any liability in this respect.
Short data sheet
— A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local Nexperia
sales office. In case of any inconsistency or conflict with the
Limiting values
— Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
short data sheet, the full data sheet shall prevail.
Product specification
— The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
Nexperia and its customer, unless Nexperia and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the Nexperia product
is deemed to offer functions and qualities beyond those described in the
Product data sheet.
Terms and conditions of commercial sale
— Nexperia
products are sold subject to the general terms and conditions of commercial
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. Nexperia hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of Nexperia products by customer.
Disclaimers
Limited warranty and liability
— Information in this document is believed
to be accurate and reliable. However, Nexperia does not give
any representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. Nexperia takes no
responsibility for the content in this document if provided by an information
source outside of Nexperia.
No offer to sell or license
— Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control
— This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
In no event shall Nexperia be liable for any indirect, incidental,
punitive, special or consequential damages (including – without limitation –
lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Translations
— A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
9 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
10 / 11
Nexperia
PESD12VV1BL
Very low capacitance bidirectional ESD protection diode
16. Contents
©
Nexperia B.V. 2017. All rights reserved
For sales office addresses, please send an email to: salesaddresses@nexperia.com
Date of release:
14 October 2016
©
PESD12VV1BL
All information provided in this document is subject to legal disclaimers.
Nexperia B.V. 2017. All rights reserved
Product data sheet
14 October 2016
11 / 11
