Omron-Electronics-G6K-2F-RF-V-DC5

Part #	Omron-Electronics-G6K-2F-RF-V-DC5
Download	Omron-Electronics-G6K-2F-RF-V-DC5

G6K-2F-RF-V

Surface-mounting High-frequency Relay

8-GHz Band Miniature DPDT

High Frequency Relay for High-speed

Differential Transmission Signal

Switching

• High-frequency characteristics (insertion loss 3 dB or less at 8 GHz)

• Miniaturized to 11.7 × 7.9 × 7.1 mm (L × W × H).

• Rated power consumption of 100 mW with high sensitivity

RoHS Compliant

■

Model Number Legend

G6K-

—

–

RF-V

Application Examples

• Semiconductor test equipment

• Test&measurement

equipment

• Communication equipment

—

1 2

3 4

1. Number

of poles/

Contact Form

2: 2-pole/ DPDT (2c)

3. Special

Function 1

RF: High-frequency compatible

■

Standard type specifications

4. Special

Function 2

V: 8-GHz

band

Contact type: Bifurcated crossbar

Ag (Surface Au alloy)

2. Terminal

Shape

F: Outside-L

surface mounting

terminals

High-speed differential trans-

mission compatible type

Note. We have a lineup of G6K (U)-2F(P)-RF(-S,-T) products for 1-GHz/3-GHz band high-frequency signal applications.

■

Ordering Information

Relay Function

Single-side stable

Enclosure rating

Fully sealed

Contact form

DPDT (2c)

Model

Rated coil voltage

3, 4.5, 5, 12 VDC

Minimum packing unit

40 pcs/tube

G6K-2F-RF-V

Note 1. When ordering, add the rated coil voltage to the model number.

Example: G6K-2F-RF-V DC5

Rated coil voltage

However, the notation of the coil voltage on the product case as well as on the packing will be marked as

VDC.

■

Ratings

●

Contacts

●

High-frequency Characteristics

Item

Load

Resistive load

125 VAC, 0.3 A

30 VDC, 1 A

10 VDC, 10 mA

8 GHz, 1 W

1 A

125 VAC or 60 VDC

Item

Frequency

8GHz

3 dB max.

Insertion loss

Isolation

Differential

transmission

characteristics

Rated load

15 dB min.

Return loss (V.SWR)

Insertion loss

5 dB min. (3.57 max.)

4 dB max.

Rated carry current

Max. switching voltage

Max. switching current

Between contacts of

the same polarity

15 dB min.

Single-ended

characteristics

(reference value)

This value is for a V.SWR of 1.2 max. at the load.

Isolation

Between contacts of

different polarity

Return loss (V.SWR)

5 dB min. (3.57 max.)

1 W

Maximum carry power

Maximum switching power

1 W

Note 1. The impedance of the measurement system is 50

. (Differential im-

pedance is 100

Note 2. The above values are initial values.

*1.

Contact your OMRON representative if the Relay will be used in an

application that requires high repeatability in high-frequency

characteristics.

*2.

These values are for a V.SWR of 1.2 max. at the load.

G6K-2F-RF-V

●

Coil: Single

Surface-mounting High-frequency Relay

Must operate voltage

Must release voltage

Maximum voltage

Power consumption

Item

Rated current

Coil resistance

(V)

(mA)

(

)

(mW)

Rated voltage

% of rated voltage

3 VDC

33.0

23.2

21.1

9.1

194

4.5 VDC

5 VDC

80% max.

10% min.

150%

Approx. 100

237

12 VDC

1,315

Note 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.

Note 2. The operating characteristics are measured at a coil temperature of 23°C.

Note 3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously.

■

Characteristics

Contact resistance

Operating time

Release time

100 m

max.

3 ms max. (approx. 1.4 ms)

3 ms max. (approx. 0.7 ms)

500 M

min. (at 500 VDC)

Insulation resistance

Between coil and

contacts

Between contacts of

different polarity

Between contacts of the

same polarity

350 VAC, 50/60 Hz for 1 min

Dielectric

strength

Between ground and

coil/contacts

Destruction

Malfunction

Destruction

Malfunction

Mechanical

10 to 55 to 10 Hz, 2.5 mm single amplitude (5 mm double amplitude)

10 to 55 to 10 Hz, 1.65 mm single amplitude (3.3 mm double amplitude)

1,000 m/s

750 m/s

50,000,000 operations min. (at a switching frequency of 36,000 operations/hour)

1,000,000 operations min. (10 VDC, 10 mA, at a switching frequency of 1,800 operations/hour)

100,000 operations min. (Other rated load, at a switching frequency of 1,800 operations/hour)

-40°C to 70°C (with no icing or condensation)

Vibration

resistance

Shock

resistance

Durability

Electrical

Ambient operating temperature

Ambient operating humidity

Weight

5% to 85%

Approx. 1.16 g

Note. The above values are initial values.

*1.

The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.

*2.

Values in parentheses are actual values.

*3.

The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength.

G6K-2F-RF-V

Surface-mounting High-frequency Relay

■

Engineering Data

●

High-frequency characteristics (differential transmission characteristics)

Insertion loss

Isolation

Return loss, V.SWR

N.O.

N.C.

Sample: G6K-2F-RF-V

4.5

Return loss

3.5

V.SWR

2.5

N.O.

N.C.

N.O.

N.C.

1.5

Sample: G6K-2F-RF-V

10 11 12

10 11

Frequency (GHz)

●

High-frequency characteristics (single-ended characteristics)

Insertion loss

Isolation

Return loss, V.SWR

N.O.

N.C.

Sample: G6K-2F-RF-V

4.5

Return loss

3.5

V.SWR

2.5

N.O.

N.C.

N.O.

N.C.

1.5

Sample: G6K-2F-RF-V

10 11

10 11 12

10 11

Frequency (GHz)

Note 1. The high-frequency characteristics depend on the mounting board. Be sure to check operation including durability in actual equipment before use.

Note 2. Ambient temperature condition: 23°C.

Note 3. The impedance of the measurement system is 50

. (Differential impedance is 100

Note 4. S parameter (Touchstone format) data used for circuit simulation is available. Please inquire.

G6K-2F-RF-V

Surface-mounting High-frequency Relay

●

High-frequency characteristics (Signal Integrity, differential transmission)

at 8.1 Gbps

at 10 Gbps

at 12.5 Gbps

N.O. Contact

300

250

200

150

100

300

250

200

150

100

300

250

200

150

100

-50

-100

-50

-100

-50

-100

100

150

200

Time (ps)

250

20 40 60 80

100 120

140 160 180

200

Time (ps)

100 120 140

160

Time (ps)

Eye Height

173 mV

Eye Width

121.0 ps

Jitter P-P

2.5 ps

Eye Height

177 mV

Eye Width

96.5 ps

Jitter P-P

3.5 ps

Eye Height

147 mV

Eye Width

75.2 ps

Jitter P-P

4.8 ps

N.C. Contact

300

250

200

150

100

250

200

150

100

250

200

150

100

-50

-100

-50

-100

-50

-100

100

150

200

Time (ps)

250

100 120 140

160

Time (ps)

20 40 60 80

100 120

140 160 180

200

Time (ps)

Eye Height

166 mV

Eye Width

116.0 ps

Jitter P-P

7.4 ps

Eye Height

172 mV

Eye Width

94.5 ps

Jitter P-P

5.5 ps

Eye Height

137 mV

Eye Width

74.4 ps

Jitter P-P

5.6 ps

Conditions

• 2

-1 PRBS signal

• Input differential voltage 200 mV

• Rise time 25 ps @10 – 90%

Note 1. Ambient temperature condition: 23°C.

Note 2. The impedance of the measurement system is 50

. (Differential impedance is 100

Note 3. This data includes loss due to the test board.

●

Propagation delay time

Conditions

Item

Propagation delay time (ps)

(typical value)

Rise time 25 ps @10 – 90%

N.O. Contact

N.C. Contact

107.5

115.0

90%

10%

Relay input

waveform

Voltage

50%

Note 1. Ambient temperature condition: 23°C.

Note 2. The impedance of the measurement system is 50

. (Differential im-

pedance is 100

Time

Relay output

waveform

50%

Time

Propagation delay time

Voltage

G6K-2F-RF-V

Surface-mounting High-frequency Relay

■

Dimensions

(Unit: mm)

Mounting Dimensions (Top View)

Terminal Arrangement/

Internal Connections

TOP VIEW

G6K-2F-RF-V

Tolerance: ±0.1 mm

11.7 0.2

7.9 0.2

Orientation mark

10.16

8.89

7.1

7.62

6.35

5.08

3.81

0.15

−

1.27

2.54

0.4 0.1

(0.76)

(1.68)

2.54

1.27

(5.08)

3.81

5.08

6.35

8.3 0.2

7.62

8.89

10.16

(9.2)

Note. Check carefully the coil

polarity of the Relay.

4.24

Note 1. Each value has a tolerance of ±0.3 mm.

Note 2. The coplanarity of the terminals is 0.15 mm max.

0.7

Note 3. The dimensions of the printed circuit board work drawing are a recommended example that take sol-

dering into consideration. Frequency characteristics vary depending on the band dimensions, so check

the effect on high-frequency characteristics using a test board before use.

■

Package specifications

Tube Packing

G6K-2F-RF-V in tube packing are arranged so that the orienta-

tion mark of each Relay in on the left side.

Be sure not to make mistakes in Relay orientation when mount-

ing the Relay to the PCB.

Stopper

(gray)

Orientation of Relays

Stopper

(green)

Tube length: 520 mm (stopper not included)

No. of Relays per tube: 40 pcs

G6K-2F-RF-V

Surface-mounting High-frequency Relay

■

G6K-2F-RF-V Recommended Soldering Method

●

Recommended Conditions for IRS Method (Surface-mounting Terminals)

• The thickness of cream solder to be applied should be

(1) IRS Method (Mounting Solder: Lead)

between 200 and 250

m and the land pattern should be

based on OMRON’s recommended PCB pattern.

• To maintain the correct soldering joint shown in the following

diagram, we recommend applying solder with the soldering

conditions shown on the left.

Soldering

220~

245

Correct Soldering

Incorrect Soldering

180~

200

Relay

rminal

Land

PCB

Preheating

150

Heel fillet is

formed

Solder

Insufficient amount of solder

Excessive amount of solder

Check the soldering in the actual mounting conditions before use.

90~120

20~30

Time (s)

(The temperature profile indicates the temperature on the circuit board surface.)

(2) IRS Method (Mounting Solder: Lead-free)

Case top panel (peak):

255°C max.

Soldering

250 max.

230

180

Preheating

150

Relay terminal

section

120 max.

30 max.

Time (s)

(The temperature profile indicates the temperature on the PCB.)

G6K-2F-RF-V

Surface-mounting High-frequency Relay

■

Safety Precautions

●

For general precautions on PCB Relays, refer to the precautions provided in General Information of the Relay Product

Data Book.

Correct Use

●

Relay Handling

●

Coating

• Use the Relay as soon as possible after opening the

moistureproof package. (As a guideline, use the Relay within

one week at 30°C or less and 60% RH or less.) If the Relay is

left for a long time after opening the moisture-proof package,

the appearance may suffer and seal failure may occur after the

solder mounting process. To store the Relay after opening the

moisture-proof package, place it into the original package and

seal the package with adhesive tape.

• When washing the product after soldering the Relay to a PCB,

use a water-based solvent or alcohol-based solvent and keep

the solvent temperature to less than 40°C. Do not put the

Relay in a cold cleaning bath immediately after soldering.

• Do not use silicone coating to coat the Relay when it is

mounted to the PCB. Do not wash the PCB after the Relay is

mounted using detergent containing silicone. Otherwise, the

detergent may remain on the surface of the Relay.

●

Repeatability

• Contact your OMRON representative if the Relay will be used

in an application that requires high repeatability in high-

frequency characteristics and contact resistance.

●

Environmental Conditions for Usage, Storage, and

Transport

• Avoid direct sunlight when using, storing, or transporting the

Relay and maintain normal temperature, humidity, and

pressure conditions.

●

Long-term, Continuous ON Contacts

• Using the Relay in a circuit where the Relay will be ON continuously

for long periods (rather than switching) can lead to unstable contacts

because the heat generated by the coil itself will affect the insulation

and can cause a film to develop on the contact surfaces. We

recommend using a latching relay (magnetic-holding relay) in this

kind of circuit. If a single-side stable model must be used in this kind

of circuit, we recommend adding fail-safe circuits in case the contact

fails or the coil burns out.

●

Claw Securing Force During Automatic Mounting

• During automatic insertion of Relays, be sure to set the

securing force of each claw to the following so that the Relay’s

characteristics will be maintained.

Direction A: 1.96 N max.

Direction B: 4.90 N max.

Direction C: 1.96 N max.

•

Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.

•

Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad

systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious

influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or

equipment, and be sure to provide the system or equipment with double safety mechanisms.

Note: Do not use this document to operate the Unit.

OMRON Corporation

Electronic and Mechanical Components Company

Contact: www.omron.com/ecb

Cat. No. K290-E1-02

0917(0317)(O)

Omron-Electronics-G6K-2F-RF-V-DC5

Related Posts

CUI-CPE-171

DB-Unlimited-TP243408-1

DB-Unlimited-TE054003-2