Omron-Electronics-P2CF-08-E

Part #	Omron-Electronics-P2CF-08-E
Download	Omron-Electronics-P2CF-08-E

Temperature Controller

E5C2

CSM_E5C2_DS_E_7_2

DIN-sized (48 x 48 mm) Temperature

Controller with Analog Setting

• Compact, low-cost Temperature Controller.

• Incorporates proportional control and reset adjustment function.

• Consecutive mounting possible using mounting adapter.

• Incorporates a plug-in socket, thus allows to DIN-track and flush

mounting.

Refer to

Safety Precautions for All Temperature

Controllers.

For the most recent information on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

■

Model Number Legend

E5C2-

@ @ @ @

4 5

1. Control

Outputs

R: Relay

2. Control

Method

3. Input

Note:

A functional explanation is provided

here for illustration, but models are

not necessarily available for all

K-type thermocouple

J-type thermocouple

possible combinations. Refer to

Ordering Information

when ordering.

Examples

•

Relay control output, ON/OFF

control, type-K thermocouple input:

E5C2-R20K

20: ON-OFF

control

40: Proportional

control

P-D: Platinum

resistance thermometer

(Pt100)

Thermistor with replaceable ele-

ment

•

Relay control output, proportional

control, thermocouple input: E5C2-

R40P-D

Ordering Information

■

Temperature Controllers

Input

Thermocouple

Resistance Thermometer

Thermistor

K (CA)

Chromel vs. alumel

J (IC)

Iron vs. constantan

Platinum resistance

thermometer Pt100

Thermistor

(replaceable element)

1,200

Themistor nominal resistance

6 k

30 k

550

4 k

(0°C) (0°C) (0°C)

(200°C)(200°C)

1,200

1,000

800

600

400

300

200

100

1,000

Standard

scale

800

600

(°C)

400

300

400

300

200

300

200

300

200

150

200

100

50 80 50

100

150

−

100

−

Indica-

Setting tion

method method

mode

Minimum

scale division

(°C)

Control

10 10 20 20 25 25

10 10

Output

Analog No

ON/OFF Relay Model

Propor-

E5C2-R20K

E5C2-R40K

E5C2-R20J

—

E5C2-R20P-D

—

E5C2-R20G

—

setting indi-

—

cation

tional

(P)

Relay Model

Note:

When placing an order, specify the temperature range in addition to the model number.

E5C2

Standard Models

Indication method

No indication

Indication method

Control mode

Output

No indication

Control mode

ON/OFF

Proportional

(P)

ON/OFF

Input

Relay

Input

Output

0 to 200

0 to 300

Relay

Input/ Resis-

Platinum

−

50 to 50

E5C2-R20P-D

E5C2-R20G

Input/ Thermo- K

(CA)

E5C2-R20K

E5C2-R40K

stan- tance

resistance

−

20 to 80

stan- couple

dard

Chromel

dard Ther- thermom-

E5C2-R40K

vs. alumel

scale mome-

eter Pt100

0 to 50

scale

(°C)

ter

0 to 400

0 to 600

0 to 800

E5C2-R40K

0 to 100

0 to 200

0 to 300

0 to 400

−

50 to 50

0 to 100

50 to 150

100 to 200

150 to 300

E5C2-R40K

0 to 1,000

E5C2-R20K

0 to 1,200

E5C2-R20K

—

Ther- THE

(re-

mistor placeable

element)

J (IC)

Iron vs.

constantan

0 to 200

0 to 300

0 to 400

E5C2-R20J

■

Accessories (Order Separately)

Sockets

Protective Cover

Name

Front Connecting Socket

Back Connecting Socket

Front Connecting Socket with Finger Protection

P2CF-08-E

Model

P2CF-08

P3G-08

Type

Model

Y92A-48B

Hard Protective Cover

Protective Cover (for finger protection)

Y92A-48G

Specifications

■

Ratings

Supply voltage

■

Characteristics

Setting accuracy

2% FS max. (Influence of EMS :

4% FS max.)

(See note 1.)

100 to 240 VAC 50/60 Hz

Operatin

oltage

90% to 110% of rated supply voltage

range

Hysteresis

Approx. 0.5% FS (fixed)

3% FS (fixed)

Proportional band

Control period

Reset range

Power

consumption

Approx. 3.6 VA

Approx. 20 s

1% FS min. (See note 2.)

Input

Thermocouple (with sensor burnout detection

circuit), platinum resistance thermometer, or

thermistor with replaceable element

Insulation

resistance

20 M

min. (at 500 VDC)

Dielectric strength

2,000 VAC, 50/60 Hz for 1 min between charged termi-

nals and uncharged metallic parts

Control method

Setting method

ON/OFF or proportional control

Analog setting

Vibration

resistance

Malfunction: 10 to 55 Hz, 0.15-mm single amplitude for

10 min each in X, Y, and Z directions

Indication

method

No indication

Destruction: 16.7 Hz, 2-mm double amplitude for 2 hrs

each in X, Y, and Z directions

Malfunction: 147 m/s

, 3 times each in 6 directions

Destruction: 294 m/s

, 3 times each in 6 directions

Control output

Relay output:

SPDT, 3 A at 250 VAC, resistive

load (switching capacity: 330 VA)

Shock resistance

Ambient operat-

−

C to 55

C (with no icing or condensation)

Life expectancy

Weight

Electrical: 100,000

operations min. (3 A at 110 VAC,

resistive load)

ing temperature

Approx. 100 g (with flush-mounting adapter)

Ambient operat-

45% to 85%

ing humidity

Degree of protection

Front panel: IEC standard IP40 (See note 3.)

Terminals: IEC

standard IP00

Applicable Socket

P2CF-08 (order separately),

P3G-08 (order separately)

Note:

Do not use an inverter output as the power supply. (Refer to

Safety Precautions for All

mperature Controllers

Applicable Protec-

tive Cover

Y92A-48B (order separately)

Note: 1.

At EN 61326-1 (Industrial electromagnetic environment

(EN/IEC 61326-1 Table 2))

No reset function is incorporated by any E5C2 model with

ON/OFF control.

The reset function is used to correct offset for proportional

control. If there is an offset below the set value, turn the

reset adjustment clockwise.

A special Watertight Cover is used to achieve this degree of

protection (IP66, NEMA4). Refer to

Y92A-

E5C2

■

Connections

Connecting the Input

•

Connect a thermocouple, the E52-THE

Thermistor (replaceable

element) or a platinum resistance thermometer to terminals 1

(positive) and 2 (negative) on the E5C2 as shown in the following

illustration.

Output

•

If the load circuit is a heating control system, be sure to connect the

load to terminals 4 and 5. If the load circuit is a cooling control

system, be sure to connect the load to terminals 4 and 6.

•

We recommend using an external relay to extend the electrical life

of internal relays when driving a large capacity load. This is

particularly important when the output relay is switched frequently

(e.g., with proportional control).

Platin

m resistance

thermometer inp

Power Supply

Thermoco

ple inp

•

If a single power supply is used for the E5C2 and the load, the

supply voltage of the power supply may vary greatly when the load

is open or closed if the capacity of the power supply is not large

enough. Make sure that the capacity of the power supply is large

enough so that the supply voltage range will be always from 90% to

110% of the rated supply voltage.

er s

pply

100/110/120

AC (same model) or

200/220/240

AC (same model)

50/60 Hz

Thermistor

ith

replacea

le element

•

The E5C2 operates at either 50 or 60 Hz.

•

On the E52-

1D, the lead wires are thermocouple element wires,

making them difficult to solder because solder will not stick to them

easil

emove the crimp terminal and polish the ends before

attempting to solder them.

Nomenclature

Operation Indicator

mperat

re setting kno

Indicator

Output

NO contacts (4 and 5)

NC contacts (4 to 6)

Operation indicator

Red Lit

Not lit

OFF

RESET adj

stment shaft

o reset f

nction is incorporated

y any

E5C2 model

ith O

/OFF control.

E5C2

Dimensions

Note:

All units are in millimeters unless otherwise indicated.

Terminal Arrangement

(Bottom View)

48 x 48

44.8 x 44.8

Dimensions with Flush-mounting Adapter (Accessory),

and Back Connecting Socket (Sold Separately)

Panel

Y92F-30 Flush-mounting adapter

Flush-mounting

adapter

P3G-08 Back

connecting socket

Tightening screw

(96)

Panel Cutout

Side-by-side Mounting

of N Controllers

Qty.

141

189

237

285

60 min.

Note: 1.

Recommended panel thickness is 1 to 4 mm.

Close side-by-side mounting is possible (in a single direction).

■

Accessories (Order Separately)

Connection Sockets

P2CF-08 Front Connecting Socket

Mounting Holes

Terminal Arrangement/

Internal Connections

(Top View)

Eight, M3.5 x 7.5 sems

o, 4.5 dia. or two, M4

70 max.

4.5-dia.

holes

Note:

Can also be

mounted to a

DIN track.

50 max.

20 max.

Note:

A finger-protection model (P2CF-08-E) is also available.

P3G-08 Back Connecting Socket (for Flush Mounting)

Terminal Arrangement/

Internal Connections

(Bottom View)

27 dia.

Note:

A Protective Cover for finger protection (Y92A-48G) is also available.

E5C2

Hard Protective Cover

Applicable Thermistor

A Hard Protective Cover (Y92A-48B) is available. It can be used in

the following cases.

Connect a Thermistor with a replaceable element (E52-THE5A, E52-

THE6D, or E52-THE6F) to the E5C2-R20G. Refer to

E52

for details.

•

rotect the setting section, against dust and dirt

•

revent accidently changing settings by touching the front of the

Controller.

•

rotect the Controller from water drips

Appearance

Model

Y92A-48B

Safety Precautions

Refer to

Safety Precautions for All

mperature Controllers

■

Correct Use

The P3G-08 can be wired in the same way as the P2CF-08.

Mounting

Track Mounting (E5C2 with P2CF-08)

When mounting two or more E5C2 models with track-mounting

sockets, leave a space of approximately 20 mm on both sides of the

sockets where hooks are located.

Hook

Duct

Dismounting

If flush mounted, loosen the screw of the adapter and disengage the

hooks for dismounting.

P2CF-08

Panel

Flush Mounting

Insert E5C2 into the square hole of the panel and insert an adapter

from the back so that there will be no space between E5C2 and the

panel. Then, secure the E5C2 with a screw.

Temperature Setting

Do not turn the temperature setting knob of the E5C2 with excessive

force, otherwise the stopper of the knob may break.

Others

•

Do not remove the housing of the E5C2, otherwise the housing

may break.

Tightening screw

•

lean the surface of the E5C2, use a soft cloth wet with neutral

detergent or alcohol. Do not use any organic solvent, such as paint

thinner or benzine, strong acid or strong alkali to clean the surface

of the E5C2, otherwise the surface of the E5C2 will become

damaged.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

onvert millimeters into inches, multiply by 0.03937.

onvert grams into ounces, multiply by 0.03527.

In the interest of product improvement, specifications are subject to change without notice.

rms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products.

Please consult your OMRON representative if you

have any questions or comments.

Warranties.

(a) Exclusive Warranty

. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron

disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMEN

ERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER

ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the

Products or otherwise of any intellectual property right. (c) Buyer Re

medy. Omron’s sole obligation hereunder shall be, at

Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount

equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,

repair, indemnity or any other claims or expenses regarding the Products unless Omron

’s analysis confirms that the Products

were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate

modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall

not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or

electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,

recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above

warranty.

See

http://www.omron.com/global/

or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIREC

NCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRAC

, WARRANT

EGLIGENCE OR STRICT LIABILIT

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself

is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,

system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product

with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence

thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate

it to actual application requirements. Actual performance is subject to the Om

ron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our

practice to change part numbers when published ratings or features are changed, or when significant construction changes are

made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers

may be assigned to fix or establish key specifications for your application.

Please consult with your Omron’s representative at

any time to confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

2015.8

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/

Omron-Electronics-P2CF-08-E

Related Posts

CUI-CPE-171

DB-Unlimited-TP243408-1

DB-Unlimited-TE054003-2