onsemi-FDMC86183
| Part # | onsemi-FDMC86183 |
Download  | onsemi-FDMC86183 |
Is Now Part of
To learn more about ON Semiconductor, please visit our website at
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most
current and up-to-date ordering information can be found at
www.onsemi.com
. Please
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FDMC86183
N-Channel
Shielded Gate
PowerTrench
®
MOSFET
100 V, 47 A, 12.8 m
Ω
Features
General Description
Shielded Gate MOSFET
T
e
chnology
This N-Channel MV MOSFET is produced using ON
Semiconductor’s advanced PowerTrench
®
process that
incorporates Shielded Gate technology. This process has been
optimized to minimise on-state resistance and yet maintain
superior switching performance with best in class soft body
diode.
Max r
DS(on)
= 12.8 m
Ω
at V
GS
= 10
V
,
I
D
= 16 A
Max r
DS(on)
= 34.6 m
Ω
at V
GS
= 6 V, I
D
= 8 A
50% Lower Qrr than Other MOSFET Suppliers
Lowers Switching Noise/EMI
Applications
MSL1 Robust Package Design
100% UIL
T
e
sted
Primary DC-DC MOSFET
Synchronous Rectifier in DC-DC and AC-DC
Motor Drive
RoHS Compliant
Solar
Pin 1
Pin 1
S
S
S
S
D
D
S
G
S
D
D
D
D
D
D
G
Top
Bottom
Power 33
MOSFET Maximum Ratings
T
A
= 25 °C unless otherwise noted.
Symbol
V
DS
V
GS
Parameter
Ratings
Units
Drain to Source Voltage
Gate to Source Voltage
Drain Current
-Continuous
-Continuous
100
V
V
±20
T
C
= 25 °C
C
= 100 °C
(Note 5)
47
T
(Note 5)
(Note 1a)
(Note 4)
(Note 3)
29
9.7
I
D
A
-Continuous
T
A
= 25 °C
-Pulsed
189
E
AS
Single Pulse Avalanche Energy
Power Dissipation
Power Dissipation
96
mJ
W
T
C
= 25 °C
T
A
= 25 °C
52
P
D
(Note 1a)
2.3
T
J
, T
STG
Operating and Storage Junction
T
e
mperature Range
-55 to +150
°C
Thermal Characteristics
R
θ
JC
R
θ
JA
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Ambient
2.4
53
°C/W
(Note 1a)
Package Marking and Ordering Information
Device Marking
Device
Package
Reel Size
13 ’’
Tape Width
12 mm
Quantity
FDMC86183
FDMC86183
Power 33
3000 units
Semiconductor Components Industries, LLC, 2016
December, 2016, Rev. 1.0
Publication Order Number:
FDMC86183/D
1
Electrical Characteristics
T
J
= 25 °C unless otherwise noted.
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Units
Off Characteristics
BV
DSS
Drain to Source Breakdown Voltage
I
D
= 250
μ
A, V
GS
= 0 V
100
V
Δ
BV
DSS
Δ
T
J
Breakdown Voltage
T
e
mperature
Coefficient
I
D
= 250
μ
A, referenced to 25 °C
63
mV/°C
I
DSS
I
GSS
Zero Gate Voltage Drain Current
Gate to Source Leakage Current
V
DS
= 80 V, V
GS
= 0 V
V
GS
= ±20 V, V
DS
= 0 V
1
μ
A
100
nA
On Characteristics
V
GS(th)
Gate to Source Threshold Voltage
V
GS
= V
DS
, I
D
= 90
μ
A
2.0
3.2
-8
4.0
V
Δ
V
GS(th)
Δ
T
J
Gate to Source Threshold Voltage
T
e
mperature Coefficient
I
D
= 90
μ
A, referenced to 25 °C
mV/°C
V
GS
= 10
V
,
I
D
= 16 A
11
18
18
20
12.8
34.6
21
r
DS(on)
g
FS
Static Drain to Source On Resistance
Forward Transconductance
V
GS
= 6 V, I
D
= 8 A
m
Ω
V
GS
= 10
V
,
I
D
= 16 A, T
J
= 125 °C
V
DS
= 5
V
,
I
D
= 16 A
S
Dynamic Characteristics
C
iss
C
oss
C
rss
R
g
Input Capacitance
1080
646
10
1515
905
15
pF
pF
pF
Ω
V
DS
= 50 V, V
GS
= 0 V,
f = 1 MHz
Output Capacitance
Reverse Transfer Capacitance
Gate Resistance
0.1
0.5
1.5
Switching Characteristics
t
d(on)
t
r
t
d(off)
t
f
Turn-On Delay Time
Rise Time
11
3
20
10
27
10
21
14
ns
ns
V
DD
= 50
V
, I
D
= 16 A,
V
GS
= 10 V, R
GEN
= 6
Ω
Turn-Off Delay Time
Fall Time
15
3
ns
ns
Q
g
T
o
tal Gate Charge
T
o
tal Gate Charge
Gate to Source Charge
Gate to Drain “Miller” Charge
Output Charge
V
GS
= 0 V to 10 V
V
GS
= 0 V to 6 V
15
10
5
nC
nC
nC
nC
nC
Q
g
V
DD
= 50 V,
D
= 16 A
I
Q
gs
Q
gd
Q
oss
3.4
43
V
DD
= 50 V, V
GS
= 0 V
Drain-Source Diode Characteristics
V
GS
= 0 V, I
S
= 2.1 A
(Note 2)
(Note 2)
0.7
0.9
22
36
18
79
1.2
1.3
36
V
SD
Source to Drain Diode
Forward Voltage
V
V
GS
= 0 V, I
S
= 16 A
t
rr
Reverse Recovery Time
Reverse Recovery Charge
Reverse Recovery Time
Reverse Recovery Charge
ns
nC
ns
I
F
= 8 A, di/dt = 300 A/
μ
s
Q
rr
t
rr
58
33
I
F
= 8 A, di/dt = 1000 A/
μ
s
Q
rr
127
nC
Notes
:
2
1. R
is determined with the device mounted on a 1 in
pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. R
is determined by
the user’s board design.
θ
JA
θ
CA
a.
53 °C/W when mounted
on a 1 in
pad of
2 oz
copper
b.
125 °C/W when mounted
on a
minimum pad of 2 oz
copper
2
2. Pulse Test: Pulse Width < 300
μ
s, Duty cycle < 2.0%.
3. E
of 96 mJ is based on starting T
= 25
°
C; N-ch: L = 3 mH, I
= 8 A, V
= 100 V, V
=10 V. 100% test at L = 0.3 mH, I
= 18 A.
AS
J
AS
DD
GS
AS
4. Pulsed Id please refer to Fig 11 SOA graph for more details.
5. Computed continuous current limited to Max Junction Temperature only, actual continuous current will be limited by thermal & electro-mechanical application board design.
2
Typical Characteristics
T
J
= 25 °C unless otherwise noted.
100
5
4
3
2
1
0
V
GS
= 10 V
V
GS
= 7 V
V
GS
= 5.5 V
80
V
GS
= 6.5 V
V
GS
= 6 V
60
V
GS
= 6 V
V
GS
= 6.5 V
40
V
GS
= 5.5 V
V
GS
= 7 V
20
PULSE DURATION = 80
μ
s
V
GS
= 10 V
PULSE DURATION = 80
μ
s
DUTY CYCLE = 0.5% MAX
0
DUTY CYCLE = 0.5% MAX
0
1
2
3
4
5
0
20
40
60
80
100
V
DS
,
DRAIN TO SOURCE VOLTAGE (V)
I
D
,
DRAIN CURRENT (A)
Figure 1.
On-Region Characteristics
Figur
e
2
. N
o r m a l i z e d O n – R e s i s ta n c e
vs. Drain Current and Gate Voltage
2.0
60
I
D
= 16 A
PULSE DURATION = 80
μ
s
V
GS
= 10 V
1.8
1.6
1.4
1.2
1.0
0.8
0.6
DUTY CYCLE = 0.5% MAX
50
40
30
20
10
0
I
D
= 16 A
T
J
= 125
o
C
T
J
= 25
o
C
-75 -50 -25
0
25 50 75
100 125 150
4
5
6
7
8
9
10
T
J
,
JUNCTION TEMPERATURE
(
o
C
)
V
GS
,
GATE TO SOURCE VOLTAGE (V)
F i gu re 3 .
N orma li zed
On – Res is ta nc e
vs. Junction Temperature
Figur
e
4
. On-Resistance
vs. Gate to
Source Voltage
100
100
PULSE DURATION = 80
μ
s
DUTY CYCLE = 0.5% MAX
V
GS
= 0 V
80
60
40
20
0
10
1
V
DS
= 5 V
0.1
T
J
= 150
o
C
T
J
= 150
o
C
T
J
= 25
o
C
T
J
= 25
o
C
0.01
T
J
= -55
o
C
T
J
= -55
o
C
0.001
2
3
4
5
6
7
8
9
10
0.0
0.2
0.4
0.6
0.8
1.0
1.2
V
GS
, GATE TO SOURCE VOLTAGE (V)
V
SD
, BODY DIODE FORWARD VOLTAGE (V)
Figure 5.
Transfer Characteristics
Figur
e
6
. Source
to Drain Diode
Forward Voltage vs. Source Current
3
Typical Characteristics
T
J
= 25 °C unless otherwise noted.
10
5000
1000
I
D
= 16 A
C
iss
V
DD
= 50 V
8
V
DD
= 25 V
C
oss
6
100
10
1
V
DD
= 75 V
4
2
0
f = 1 MHz
GS
= 0 V
V
C
rss
0
4
8
12
16
20
100
500
0.1
1
10
100
V
DS
, DRAIN TO SOURCE VOLTAGE (V)
Q
g
, GATE CHARGE (nC)
Figure 7.
Gate Charge Characteristics
Figur
e
8
. C
a p a c i t a n c e v s . D r a i n
to Source Voltage
50
40
30
20
10
0
50
R
θ
JC
= 2.4
o
C/W
T
J
= 25
o
C
V
GS
= 10 V
10
T
J
= 100
o
C
V
GS
= 6 V
T
J
= 125
o
C
1
0.01
0.1
1
10
25
50
75
100
125
150
T
C
,
CASE TEMPERATURE
(
o
C
)
t
AV
, TIME IN AVALANCHE (ms)
Figure9. U
n c l a m p e d I n d u c t i v e
Switching Capability
Figur
e
1
0. Maximum Continuous Drain
Current vs. Case Temperature
300
100
10000
1000
100
SINGLE PULSE
R
θ
JC
= 2.4
o
C/W
C
= 25
o
C
T
10
μ
s
10
1
THIS AREA IS
LIMITED BY r
DS(on)
100
μ
s
SINGLE PULSE
T
J
= MAX RATED
1 ms
R
θ
JC
= 2.4
o
C/W
CURVE BENT TO
10 ms
T
C
= 25
o
C
MEASURED DATA
100 ms
0.1
0.1
10
10
-5
10
-4
10
-3
t, PULSE WIDTH (sec)
10
-2
10
-1
1
10
100
1
V
DS
, DRAIN to SOURCE VOLTAGE (V)
Figure 11.
Forward Bias Safe
Operating Area
Figure 12. Single Pulse Maximum
Power Dissipation
4
Typical Characteristics
T
J
= 25 °C unless otherwise noted.
2
DUTY CYCLE-DESCENDING ORDER
1
D = 0.5
0.2
0.1
0.05
0.02
P
DM
0.01
0.1
t
1
t
2
NOTES:
(t) = r(t) x R
Z
θ
JC
θ
JC
o
R
= 2.4
C/W
θ
JC
SINGLE PULSE
Peak T
= P
Duty Cycle, D = t
/ t
x Z
(t) + T
0.01
J
DM
θ
JC C
1
2
0.005
10
-5
10
-4
10
-3
t, RECTANGULAR PULSE DURATION (sec)
10
-2
10
-1
1
Figure 13.
Junction-to-Case Transient Thermal Response Curve
5
2.37 MIN
SYM
3.40
3.20
A
PKG
C
C
L
L
8
5
(0.45)
B
8
5
2.15 MIN
0.70 MIN
(0.40)
(0.65)
PKG
3.40
3.20
C
PKG
C
L
L
1
4
1
4
PIN 1
INDICATOR
0.42 MIN
(8X)
0.65
1.95
SEE
DETAIL A
LAND PATTERN
RECOMMENDATION
0.10 C
1.95
0.10 C A B
0.37
(8X)
0.27
0.65
0.80
0.70
0.60
0.40
1
4
0.08 C
0.05
0.00
C
0.25
0.15
SEATING
PLANE
C
PKG
L
SCALE: 2X
1.99
1.79
NOTES: UNLESS OTHERWISE SPECIFIED
8
5
(0.34)
A) PACKAGE
STANDARD REFERENCE:
JEDEC MO-240, ISSUE A, VAR. BA,
(0.33) TYP
(0.52 TYP)
(2.27)
B) ALL
DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS
DO NOT INCLUDE BURRS
OR MOLD FLASH. MOLD FLASH OR
BURRS DOES NOT EXCEED 0.10MM.
D) DIMENSIONING
AND TOLERANCING PER
ASME Y14.5M-2009.
E) DRAWING
FILE NAME: MKT-PQFN08SREV1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at
www.onsemi.com/site/pdf/Patent
−
Marking.pdf
. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMEN
T
:
N. American Technical Support
: 800
−
282
−
9855
T
o
ll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81
−
3
−
5817
−
1050
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone
: 303
−
675
−
2175 or 800
−
344
−
3860
T
o
ll Free USA/Canada
Fax
: 303
−
675
−
2176 or 800
−
344
−
3867
T
o
ll Free USA/Canada
Email
: orderlit@onsemi.com
For additional information, please contact your local
Sales Representative
©
Semiconductor Components Industries, LLC
