Phoenix-Contact-2900279

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user’s  

documentation. Our General Terms of Use for Downloads are valid  

(http://phoenixcontact.com/download)  

6.2 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, for mounting on  

DIN rail NS 35/7,5, 1 changeover contact, input voltage 60 V DC  

Key Commercial Data  

Packing unit  

10 pc  

GTIN  

GTIN  

4046356507622  

Technical data  

Note  

EMC: class A product, see manufacturer’s declaration in the download  

area  

Utilization restriction  

Dimensions  

Width  

Height  

Depth  

6.2 mm  

80 mm  

94 mm  

Ambient conditions  

Ambient temperature (operation)  

-40 °C … 60 °C  

-40 °C … 85 °C  

Ambient temperature (storage/transport)  

Input data  

Nominal input voltage U

N  

Status display  

60 V DC  

LED  

Protective circuit  

Damping diode, polarity protection diode  

Damping diode  

General  

Protective circuit  

Damping diode, polarity protection diode  

03/12/2021 Page

 

1 / 14  

Technical data  

General  

Operating mode  

100% operating factor  

Color  

gray  

Flammability rating according to UL 94  

Mounting position  

V0 (Housing)  

any  

Connection data  

Connection name  

Input side  

Connection method  

Push-in connection  

10 mm  

Stripping length  

Conductor cross section solid  

Conductor cross section flexible  

0.14 mm² … 2.5 mm²  

0.14 mm² … 2.5 mm²  

0.2 mm² … 2.5 mm² (Single ferrule)  

2x 0.5 mm² … 1 mm² (TWIN ferrule)  

26 … 14  

Conductor cross section AWG  

Connection data 2  

Connection name  

Output side  

Connection method  

Push-in connection  

10 mm  

Stripping length  

Conductor cross section solid  

Conductor cross section flexible  

0.14 mm² … 2.5 mm²  

0.14 mm² … 2.5 mm²  

0.2 mm² … 2.5 mm² (Single ferrule)  

2x 0.5 mm² … 1 mm² (TWIN ferrule)  

26 … 14  

Conductor cross section AWG  

Standards and Regulations  

Connection in acc. with standard  

CUL  

Conformance/approvals  

Designation  

Identification  

Corrosive gas test  

ISA-S71.04. G3 Harsh Group  

EN 60068-2-60  

Environmental Product Compliance  

REACh SVHC  

China RoHS  

Lead 7439-92-1  

Environmentally Friendly Use Period = 50 years  

For details about hazardous substances go to tab “Downloads”,  

Category “Manufacturer’s declaration”  

Classifications  

eCl@ss  

eCl@ss 10.0.1  

eCl@ss 11.0  

27371603  

27371603  

03/12/2021 Page

 

2 / 14  

Classifications  

eCl@ss  

eCl@ss 4.0  

eCl@ss 4.1  

eCl@ss 5.0  

eCl@ss 5.1  

eCl@ss 6.0  

eCl@ss 7.0  

eCl@ss 9.0  

27371000  

27371000  

27371600  

27371600  

27371600  

27371603  

27371603  

ETIM  

ETIM 2.0  

ETIM 3.0  

ETIM 4.0  

ETIM 5.0  

ETIM 6.0  

ETIM 7.0  

EC001456  

EC001456  

EC001456  

EC001456  

EC001456  

EC001456  

UNSPSC  

UNSPSC 6.01  

UNSPSC 7.0901  

UNSPSC 11  

30211917  

39121516  

39121516  

39121516  

39122326  

39122335  

39122335  

39122335  

39122335  

UNSPSC 12.01  

UNSPSC 13.2  

UNSPSC 18.0  

UNSPSC 19.0  

UNSPSC 20.0  

UNSPSC 21.0  

Approvals  

Approvals  

Approvals  

DNV GL / UL Recognized / cUL Recognized / EAC / cULus Recognized  

Ex Approvals  

Approval details  

03/12/2021 Page

 

3 / 14  

Approvals  

DNV GL  

UL Recognized  

cUL Recognized  

EAC  

TAE0000196-03  

FILE E 238705  

FILE E 238705  









RU D-  

DE.B*00573/18  

cULus Recognized  



Accessories  

Accessories  

Bridge  

Continuous plug-in bridge, length: 500 mm, color: red  

Continuous plug-in bridge, length: 500 mm, color: blue  

03/12/2021 Page

 

4 / 14  

Accessories  

Continuous plug-in bridge, length: 500 mm, color: gray  

Single plug-in bridge, length: 6 mm, number of positions: 2, color: red  

Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue  

Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray  

Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray  

Controller board  

03/12/2021 Page

 

5 / 14  

Accessories  

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw  

connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto  

8x PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend  

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw  

connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto  

8x PLC-INTERFACE terminals), number of channels: 8, control logic: minusschaltend  

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw  

connection 1x, connection 2: D-SUB pin strip 1x 15-position, connection 3: Plug connection (Can be snapped onto 8x  

PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend  

V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: Screw  

connection 1x, connection 2: D-SUB socket strip 1x 15-position, connection 3: Plug connection (Can be snapped onto  

8x PLC-INTERFACE terminals), number of channels: 8, control logic: plusschaltend  

DIN rail  

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,  

passivated with a thick layer, length: 2000 mm, color: silver  

03/12/2021 Page

 

6 / 14  

Accessories  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,  

passivated with a thick layer, length: 2000 mm, color: silver  

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,  

white passivated, length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,  

white passivated, length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,  

uncoated, length: 2000 mm, color: silver  

DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,  

length: 2000 mm, color: silver  

03/12/2021 Page

 

7 / 14  

Accessories  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,  

length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,  

length: 2000 mm, color: copper-colored  

DIN rail end piece, for DIN rail NS 35/7.5  

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,  

passivated with a thick layer, length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,  

galvanized, passivated with a thick layer, length: 2000 mm, color: silver  

03/12/2021 Page

 

8 / 14  

Accessories  

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,  

white passivated, length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,  

Galvanized, white passivated, length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,  

uncoated, length: 2000 mm, color: silver  

DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,  

length: 2000 mm, color: silver  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,  

galvanized, length: 2000 mm, color: silver  

03/12/2021 Page

 

9 / 14  

Accessories  

DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,  

uncoated, length: 2000 mm, color: copper-colored  

DIN rail end piece, for DIN rail NS 35/15  

DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,  

galvanized, passivated with a thick layer, length: 2000 mm, color: silver  

Labeled terminal marker  

Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap  

into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual  

labels: 10  

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive  

numbers 1 … 10, 11 … 20, etc. up to 491 … 500, mounting type: snap into tall marker groove, for terminal block width:  

6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10  

03/12/2021 Page

 

10 / 14  

Accessories  

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive  

numbers 1 … 10, 11 … 20, etc. up to 491 … 500, mounting type: snap into tall marker groove, for terminal block width:  

6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of individual labels: 10  

Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical  

numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering  

field size: 6.15 x 10.5 mm, Number of individual labels: 10  

Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N,  

PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field  

size: 6.15 x 10.5 mm, Number of individual labels: 10  

Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: U, V,  

W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering  

field size: 6.15 x 10.5 mm, Number of individual labels: 10  

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting  

type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of  

individual labels: 80  

03/12/2021 Page

 

11 / 14  

Accessories  

Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting  

type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of  

individual labels: 60  

Partition plate  

Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual  

separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,  

isolation  

Power module  

Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5  

Screwdriver tools  

Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-  

component grip, with non-slip grip  

Terminal marking  

Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:  

snap into tall marker groove, for terminal block width: 6.2 mm, lettering field size: 6.15 x 10.5 mm, Number of  

individual labels: 10  

03/12/2021 Page

 

12 / 14  

Accessories  

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,  

BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block  

width: 6.2 mm, lettering field size: 5.6 x 10.5 mm, Number of individual labels: 80  

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,  

BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,  

THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 6.2 mm, lettering field  

size: 5.6 x 10.5 mm, Number of individual labels: 60  

Necessary add-on products  

Plug-in miniature power relay, with multi-layer gold contact, 1 changeover contact, input voltage 60 V DC  

Plug-in miniature power relay, with power contact, 1 changeover contact, input voltage 60 V DC  

Plug-in miniature solid-state relay, input solid-state relay, 1 N/O contact, input: 60 V DC, output: 3 – 48 V DC/100 mA  

03/12/2021 Page

 

13 / 14  

Accessories  

Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 60 V DC, output: 3 … 33 V DC/3 A  

Plug-in miniature solid-state relay, power solid-state relay, 1 N/O contact, input: 60 V DC, output: 24 – 253 V AC/0.75  

A

Phoenix Contact 2021 © – all rights reserved  

PHOENIX CONTACT GmbH & Co. KG  

Flachsmarktstr. 8  

32825 Blomberg  

Germany  

Tel. +49 5235 300  

Fax +49 5235 3 41200  

03/12/2021 Page

 

14 / 14