Phoenix-Contact-2903319
| Part # | Phoenix-Contact-2903319 |
Download  | Phoenix-Contact-2903319 |
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user’s
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay module with screw connection, consisting of: relay base, power contact relay, and
retaining bracket. Contact type: 4 changeover contacts. Input voltage: 125 V DC
Product Description
The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in
accordance with UL 508.
The relevant approvals can be called up at the individual components in question.
Key Commercial Data
Packing unit
10 pc
GTIN
GTIN
4046356732215
Technical data
Note
EMC: class A product, see manufacturer’s declaration in the download
area
Utilization restriction
Dimensions
Width
Height
Depth
27 mm
89 mm
75 mm
Ambient conditions
Ambient temperature (operation)
Ambient temperature (storage/transport)
Degree of protection
-40 °C … 60 °C
-40 °C … 85 °C
IP20 (Relay base)
RT I (Relay)
Coil side
Nominal input voltage U
N
125 V DC
03/12/2021 Page
1 / 17
Technical data
Coil side
Input voltage range in reference to U
N
Typical input current at U
N
Typical response time
Typical release time
see diagram
7.5 mA
13 ms
14 ms
Coil voltage
125 V DC
Damping diode
Yellow LED
Protective circuit
Operating voltage display
Contact side
Contact type
4 changeover contacts
Single contact
Type of switch contact
Contact material
AgNi
Maximum switching voltage
Minimum switching voltage
Min. switching current
Maximum inrush current
Limiting continuous current
Interrupting rating (ohmic load) max.
250 V AC/DC
5 V (At 24 mA)
5 mA (at 24 V)
16 A (20 ms, N/O contacts)
6 A (see diagram)
144 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
1500 VA (for 250 V AC)
2 A (at 24 V, DC13)
0.22 A (at 120 V, DC13)
0.11 A (at 250 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)
Switching capacity
General
2.5 kV
rms
(50 Hz, 1 min., winding/contact)
2 kV
rms
(50 Hz, 1 min., changeover contact/changeover contact)
100% operating factor
Test voltage
Operating mode
Flammability rating according to UL 94
Mechanical service life
Mounting position
V2 (Housing)
approx. 2x 10
7
cycles
any
Assembly instructions
In rows with zero spacing
Connection data
Connection name
Input side
Connection method
Screw connection
03/12/2021 Page
2 / 17
Technical data
Connection data
Stripping length
8 mm
Conductor cross section solid
0.5 mm² … 4 mm²
Conductor cross-section solid (2 conductors with same cross section)
Conductor cross section flexible
0.5 mm² … 2.5 mm²
0.5 mm² … 4 mm²
0.5 mm² … 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² … 2.5 mm²
0.5 mm² … 1.5 mm² (TWIN ferrule with plastic sleeve)
20 … 10 (solid)
Conductor cross section AWG
20 … 12 (flexible)
0.5 Nm … 0.6 Nm
Torque
Connection data 2
Connection name
Contact side
Connection method
Screw connection
8 mm
Stripping length
Conductor cross section solid
Conductor cross-section solid (2 conductors with same cross section)
Conductor cross section flexible
0.5 mm² … 4 mm²
0.5 mm² … 2.5 mm²
0.5 mm² … 4 mm²
0.5 mm² … 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)
0.5 mm² … 2.5 mm²
0.5 mm² … 1.5 mm² (TWIN ferrule with plastic sleeve)
20 … 10 (solid)
Conductor cross section AWG
20 … 12 (flexible)
0.5 Nm … 0.6 Nm
Torque
Standards and Regulations
Standards/regulations
Rated insulation voltage
Rated surge voltage
Insulation
DIN EN 50178
250 V AC
2.5 kV
Basic insulation
Pollution degree
2
II
Overvoltage category
Conformance/approvals
Designation
Identification
Corrosive gas test
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
03/12/2021 Page
3 / 17
Circuit diagram
Diagram
42 32 22 12
44 34 24 14
11
10
9
8
7
6
5
4
3
2
1
41 31 21 11
A2-
A1+
DC coils
20
30
40
50
60
70
80
Ambient temperature [°C]
DC coil
AC coil
Contact derating
Diagram
Diagram
1,8
1,7
1,6
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
20
10
6
4
2
1
0,5
0,3
0,2
0,1
10
20
30
50 70
100
200 300
20
30
40
50
60
70
80
Switching voltage [V]
Ambient temperature [°C]
DC coil (observe contact derating)
AC coil (observe contact derating)
AC, ohmic load
DC, ohmic load
Operating voltage range
Interrupting rating
Diagram
Diagram
7
10
1
0,9
0,8
0,7
0,6
0,5
0,4
6
10
5
10
0
1
2
3
0,3
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
Switching capacity [kVA]
250 V AC, ohmic load
j
COS
!
Electrical service life
Service life reduction factor
03/12/2021 Page
4 / 17
Articles in set
RIF-2… relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/
interference suppression modules, for mounting on NS 35/7,5
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, status LED, freewheeling diode,
mechanical switching position indicator, polarity: A1+, A2-, coil voltage: 125 V DC
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for
industrial relay
Classifications
eCl@ss
eCl@ss 10.0.1
eCl@ss 11.0
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 9.0
27371601
27371601
27371100
27371100
27371600
27371600
27371600
27371601
27371601
ETIM
ETIM 2.0
ETIM 3.0
ETIM 4.0
ETIM 5.0
ETIM 6.0
ETIM 7.0
EC001437
EC001437
EC001437
EC001437
EC001437
EC001437
03/12/2021 Page
5 / 17
Classifications
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
30211916
39121515
39121515
39121515
39122334
39122334
39122334
39122334
39122334
UNSPSC 12.01
UNSPSC 13.2
UNSPSC 18.0
UNSPSC 19.0
UNSPSC 20.0
UNSPSC 21.0
Approvals
Approvals
Approvals
DNV GL / EAC / EAC
Ex Approvals
Approval details
DNV GL
TAA000018V
EAC
TR_TS_D_00573_c
RU*C-
DE.*08.B.00010
EAC
Accessories
Accessories
DIN rail
03/12/2021 Page
6 / 17
Accessories
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
03/12/2021 Page
7 / 17
Accessories
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
03/12/2021 Page
8 / 17
Accessories
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
Galvanized, white passivated, length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
03/12/2021 Page
9 / 17
Accessories
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,
galvanized, length: 2000 mm, color: silver
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,
uncoated, length: 2000 mm, color: copper-colored
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
03/12/2021 Page
10 / 17
Accessories
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS…5, FBS…6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp, width: 9.5 mm, color: gray
Insulating sleeve
Insulating sleeve, color: white
Insulating sleeve, color: red
Insulating sleeve, color: blue
03/12/2021 Page
11 / 17
Accessories
Insulating sleeve, color: yellow
Insulating sleeve, color: green
Insulating sleeve, color: gray
Insulating sleeve, color: black
Jumper
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: red
03/12/2021 Page
12 / 17
Accessories
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: blue
Plug-in bridge, pitch: 6.2 mm, width: 10.7 mm, number of positions: 2, color: gray
Labeled terminal marker
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual
labels: 10
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 … 10, 11 … 20, etc. up to 491 …
500, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5
mm, Number of individual labels: 10
Zack marker strip, white, Printed vertically: consecutive numbers 1 … 10, 11 … 20, etc. up to 491 … 500, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm
03/12/2021 Page
13 / 17
Accessories
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: Identical
numbers 1 or 2, etc. up to 100, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering
field size: 5.15 x 10.5 mm, Number of individual labels: 10
Zack marker strip, Strip, white, labeled, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall
marker groove, for terminal block width: 5.2 mm, lettering field size: 5.15 x 10.5 mm, Number of individual labels: 10
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of
individual labels: 96
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 4.6 x 10.5 mm, Number of
individual labels: 72
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual
labels: 5
03/12/2021 Page
14 / 17
Accessories
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of individual labels: 5
Marker carriers
Double marker carrier, snaps onto the double-level spring-cage terminal block STTB 2,5, STTB 4, PTTB 2,5, PTTB 4
can be marked with UC-TM 5, ZB 5 or UC-TMF 5, ZBF 5
Terminal marking
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm, Number of individual labels: 32
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 5.1 mm, Number of individual labels: 32
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 5.2 mm, lettering field size: 5.1 x 10.5 mm, Number of individual
labels: 10
03/12/2021 Page
15 / 17
Accessories
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 5.2 mm, lettering field size: 10.5 x 4.6 mm, Number of individual labels: 96
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 5.2 mm, lettering field
size: 4.6 x 10.5 mm, Number of individual labels: 72
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 15.2 mm, lettering field size: 10.5 x 15.1 mm, Number of
individual labels: 5
Test plug terminal block
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Spare parts
RIF-2… relay base, for industrial relay with 2 or 4 changeover contacts, screw connection, plug-in option for input/
interference suppression modules, for mounting on NS 35/7,5
03/12/2021 Page
16 / 17
Accessories
Plug-in industrial relay with power contacts, 4 changeover contacts, test button, status LED, freewheeling diode,
mechanical switching position indicator, polarity: A1+, A2-, coil voltage: 125 V DC
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-2 relay base, for
industrial relay
Phoenix Contact 2021 © – all rights reserved
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
03/12/2021 Page
17 / 17
