Phoenix-Contact-2912604

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user’s  

documentation. Our General Terms of Use for Downloads are valid  

(http://phoenixcontact.com/download)  

PLC-INTERFACE, consisting of PLC-BSP…/21-21AU basic terminal block with spring-cage connection and plug-  

in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 60 V DC  

Product Features  

Slim design  

Efficient connection to system cabling using V8 adapter  

RT III sealed relay  

Safe isolation according to DIN EN 50178 between coil and contact  

Integrated input circuit and interference suppression circuit  

Functional plug-in bridges  

Key commercial data  

Packing unit  

1 pc  

Weight per Piece (excluding packing)  

Custom tariff number  

Country of origin  

61.2 GRM  

85364190  

Germany  

Technical data  

Note  

EMC: class A product, see manufacturer’s declaration in the download  

area  

Utilization restriction  

Dimensions  

Width  

Height  

Depth  

14 mm  

80 mm  

94 mm  

Ambient conditions  

10/27/2014 Page

 

1 / 6  

Technical data  

Ambient conditions  

Ambient temperature (operation)  

-40 °C … 60 °C  

-40 °C … 85 °C  

Ambient temperature (storage/transport)  

Coil side  

Nominal input voltage U

N  

Typical input current at U

N  

Typical response time  

Typical release time  

60 V DC  

10 mA  

8 ms  

10 ms  

Operating voltage display  

Protective circuit  

Yellow LED  

Protection against polarity reversal Polarity protection diode  

Free-wheeling diode Damping diode  

Contact side  

Contact type  

2 PDT  

Contact material  

AgNi, hard gold-plated  

30 V AC  

Maximum switching voltage  

36 V DC  

Minimum switching voltage  

Maximum inrush current  

Min. switching current  

100 mV (at 10 mA)  

50 mA  

1 mA (at 24 V)  

Limiting continuous current  

Interrupting rating (ohmic load) max.  

Note  

50 mA  

1.2 W (at 24 V DC)  

the following values are applicable if a gold layer is destroyed  

250 V AC/DC  

Maximum switching voltage  

Minimum switching voltage  

Limiting continuous current  

Maximum inrush current  

Min. switching current  

5 V AC/DC  

6 A  

15 A (300 ms)  

10 mA  

Interrupting rating (ohmic load) max.  

140 W (at 24 V DC)  

85 W (at 48 V DC)  

60 W (at 60 V DC)  

44 W (at 110 V DC)  

60 W (at 220 V DC)  

1500 VA (for 250 V AC)  

2 A (at 24 V, DC13)  

0.2 A (at 110 V, DC13)  

0.2 A (at 250 V, DC13)  

2 A (at 24 V, AC15)  

Switching capacity in acc. with DIN VDE 0660/IEC 60947  

10/27/2014 Page

 

2 / 6  

Technical data  

Contact side  

2 A (at 120 V, AC15)  

2 A (at 250 V, AC15)  

General  

Operating mode  

100% operating factor  

RT III (Relay)  

Degree of protection  

Mechanical service life  

Inflammability class according to UL 94  

Designation  

3 x 10

7

cycles  

V0  

Standards/regulations  

Standards/regulations  

IEC 60664  

EN 50178  

IEC 62103  

Rated surge voltage / insulation  

Pollution degree  

6 kV / Basic isolation  

2

Surge voltage category  

Mounting position  

III  

any  

Assembly instructions  

In rows with zero spacing  

Connection data  

Connection method  

Spring-cage connection  

Stripping length  

8 mm  

Conductor cross section stranded min.  

Conductor cross section stranded max.  

Conductor cross section solid min.  

Conductor cross section solid max.  

Conductor cross section AWG/kcmil max  

Conductor cross section AWG/kcmil min.  

0.14 mm²  

2.5 mm²  

0.14 mm²  

2.5 mm²  

14  

26  

Classifications  

eCl@ss  

eCl@ss 4.0  

eCl@ss 4.1  

eCl@ss 5.0  

eCl@ss 5.1  

eCl@ss 6.0  

eCl@ss 7.0  

eCl@ss 8.0  

27371102  

27371102  

27371001  

27371001  

27371001  

27371001  

27371001  

10/27/2014 Page

 

3 / 6  

Classifications  

ETIM  

ETIM 2.0  

ETIM 3.0  

ETIM 4.0  

ETIM 5.0  

EC000196  

EC000196  

EC000196  

EC000196  

UNSPSC  

UNSPSC 6.01  

UNSPSC 7.0901  

UNSPSC 11  

30211916  

39121515  

39121515  

39121515  

39121515  

UNSPSC 12.01  

UNSPSC 13.2  

Approvals  

Approvals  

Approvals  

UL Listed / cUL Listed / GL / UL Recognized / cUL Recognized / cULus Recognized / cULus Listed  

Ex Approvals  

Approvals submitted  

Approval details  

UL Listed  

cUL Listed  

GL  

10/27/2014 Page

 

4 / 6  

Approvals  

UL Recognized  

cUL Recognized  

cULus Recognized  

cULus Listed  

Drawings  

Circuit diagram  

21  

24  

22  

A2  

A1  

11  

14  

12  

10/27/2014 Page

 

5 / 6  

Diagram  

Curve A  

Maximum permissible continuous voltage U

max

with limiting continuous current on the contact side (see relevant technical data)  

Curve B  

Minimum permissible operate voltage U

op

after pre-excitation (see relevant technical data)  

Phoenix Contact 2014 © – all rights reserved  

10/27/2014 Page

 

6 / 6