Phoenix-Contact-2966485
| Part # | Phoenix-Contact-2966485 |
Download  | Phoenix-Contact-2966485 |
Universal PLC Interface with PDT Relay
– now also with spring cage connection system!
The PLC-R…21 relay series, that can be used
universall
y
,
c
onsisting of 6.2 mm base terminal blocks
and pluggable miniature relays with PDT contact, has
now been included in the range with
spring cage
connections
. The wiring, diagonally from above, is
particularly convenient during assembl
y
.
T
he cost-
intensive wiring is reduced yet again when the plug-in
bridges are implemented. A side-effect is a cut in the
likelihood of faulty wiring and time-consuming trouble-
shooting.
PDT = great flexibility
The universal PDT series, PLC-RS
P
.
..21, is used
whenever an application demands great flexibilit
y
.
I
t can
be used
– as an input or output interface or
– in N/C, N/O or PDT applications.
Advantage: fewer ordering and warehousing items. In
the standard version, the PLC interfaces are supplied
equipped complete with relay (or miniature optical
coupler with electronic N/O function).
“…6”
8
(IEC)
rigid
solid
flexible
stranded
I
U
[mm
2
]
AWG
24-14
[A] [V]
Input voltages of 12V to 230V
Connection data
0.2-2.5
0.2-1.5
*
*
PLC-RS
P
.
..21 on the coil side is, like the proven
screw clamp versions, available in all conventional
industrial voltages from 12 V to 230
V
. A
f
urther
advantage is the ready-integrated input circuit. It
consists of a status displa
y
,
d
amping function, and
polarity reversal protection function, and guarantees a
clear display of the operational status, EMC interference
suppression of the coil, and prevents destruction of the
same, should the polarity be accidentally reversed.
* The electrical data are determined by the relay.
A2
A1
11
14
12
Robust miniature relay
The heart of the PDT relay series is a robust
miniature relay from the latest generation, equipped
with features that you will search for in vain in most
standard pluggable relays:
6,2
80
– Operational safety with IP67-protected mechanics,
– Environmentally
friendl
y
,
c
admium-free power contact
material for loads up to 250 V AC/6 A,
– As an alternative with a gold layer for smaller
capacities (mA),
– Reliable isolation in acc. with DIN VDE 0106-101,
– 4kV
potential separation between coil and contact.
rms
The relay is securely fastened using an engagement
lever. Should it become worn, it can be disengaged, and
– without disconnecting the wiring – replaced quickly
and economicall
y
.
contact 11 on the contact side, the continuous plug-in
bridges which can be cut to length as desired, or the 2-
position jumper plugs guarantee with one “click” quick,
economical and fault-free wiring, whilst providing
Plug-in bridges save wiring
A big plus for cunning wiring professionals is the
convenient plug-in bridge system FBS
T
.
W
hether there
utmost clarit
y
.
T
his makes complicated, time-consuming
is an A1/A2 ground on the coil side, or group feed-in at
loop bridges a thing of the past!
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 1 of 14
for mounting on
120 V AC/220 V DC
for mounting on
120 V AC/220 V DC
Universal PLC Interface with PDT Relay
– now also with spring cage connection system!
Input
Description
voltage
Type
Orde
r
N
o.
Pcs./ Pkt.
1
U
N
)
PLC interface,
consisting of
base terminal block PLC-BSP…/21 and
pluggable miniature relay
equipped with universal
multi-layer contact relay
PLC-RSP- 24DC/21AU
PLC-RSP- 24UC/21AU
PLC-RSP-120UC/21AU
PLC-RSP-230UC/21AU
24 V DC
24 V AC/DC
29 66 54 0
29 66 55 3
29 66 58 2
29 66 64 7
10
10
10
10
(see catalog part 6, page 32),
3
230 V AC/220 V DC
2
)
PLC interface,
consisting of
base terminal block PLC-BSP…/21 and
pluggable miniature relay
equipped with
power contact relay
PLC-RSP- 24DC/21
PLC-RSP- 24UC/21
PLC-RSP-120UC/21
PLC-RSP-230UC/21
24 V DC
24 V AC/DC
29 66 47 2
29 66 48 5
29 66 52 4
29 66 53 7
10
10
10
10
(see catalog part 6, page 32),
3
230 V AC/220 V DC
2
)
Technical data
Input data
Nominal input voltage U
N
24 V DC
24 V AC/DC
120 V AC/
110 V DC
230 V AC/
220 V DC
2
)
Permissible input voltage range
Typ. input current at U
N
Typ. response time at U
N
Typ. release time at U
N
Input circuit
see diagram, catalog part 6, page 25
9 mA
5 ms
8 ms
11/8.5 mA
6 ms
15 ms
3.5/3 mA
6 ms
15 ms
3 mA
7 ms
15 ms
24 V DC
24, 120, 230 V AC/DC
operation indicator, polarity protection diode, damping diode
operation indicator, bridge rectifier
Output data
PLC-R…/21
PLC-R…/21AU
Contact type
Contact material
single contact, 1 PDT
AgSnO
single contact, 1 PDT
AgSnO + 5 µ Au
3
)
Max. switching voltage
Min. switching voltage
Limiting continuous current
Max. inrush current
Min. switching current
Max. power rating, ohmic load:
250 V AC/DC
2
12 V AC/DC
6 A
)
30 V AC/36 V DC
100 mV
50 mA
50 mA
1 mA
1.2 W
–
–
on request
10 mA
140 W
20 W
18 W
23 W
40 W
1500 VA
120 mW
24 V DC
48 V DC
60 V DC
110 V DC
220 V DC
250 V AC
–
–
–
Min. switching capacity
100 µW
General data
Test voltage input/output
Ambient temperature range
Duty type rating
4 kV, 50 Hz, 1 min.
– 20 °C to + 55 °C (24 V types to + 60 °C)
100 % ED
Inflammability class
Mechanical service life
Standards/regulations
V0 in acc. with UL 94
10
7
cycles
IEC 664/IEC 664 A/DIN VDE 0110, contamination class 3,
Surge voltage category III, DIN VDE 0160 (in relev. parts),
IEC 255/DIN VDE 0435 (in relev. parts), DIN VDE 0106-101: 1986-11,
increased insulation I/O
4
)
Installation position/assembly
Type of connection
as desired, in rows with zero spacing
spring cage connection
1
) Further input voltages available on request.
Notes:
2
) For voltages higher than 250 V (e.g. L1, L2, L3) between identical
terminal blocks of adjacent modules, the PLC-ATP separating plate
(see catalog part 6, page 34) should be installed.
3
) If the maximum values indicated are exceeded, the gold layer is
destroyed. The values of the AgSnO contact are then valid.
4
) For
protective isolation between identical terminal blocks of adjacent
modules, the PLC-ATP separating plate (see catalog part 6, page
34) should be installed.
Type of housing: polyamide
P
A
n
on-reinforced,
Color: green, see catalog part 6, page 149
Marking systems and mounting material, see catalog part 3/4.
The rated cross section (see catalog part 6, page 151) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must be
dampened with an effective protection circuit.
Due to the input circuit integrated in the base terminal block, a 6
0
V
relay, REL-MR-60DC/… is used with the 120 V and 230 V modules.
(see catalog part 6, page 32)
The PLC-ATP separating plate (see catalog part 6, page 34) must
always be installed at the beginning and end of a PLC terminal
strip.
PHOENIX CONTACT page 2 of 14
Universal PLC Interface with Optical Coupler
– now also with spring cage connection system!
The PLC-O.. optical coupler series, that can be used
universall
y
,
c
onsisting of pluggable miniature optical
couplers and the same 6.2 mm base terminal blocks as
in the PDT series, has now been included with
spring
cage connections
in the range. The wiring, diagonally
from above, is particularly convenient during assembl
y
.
The cost-intensive wiring is reduced yet again when the
plug-in bridges are implemented. A side-effect is a cut
in the likelihood of faulty wiring and time-consuming
trouble-shooting.
The standard PLC-OSP series can be implemented
either as an input or output interface, thus simplifying
ordering, and saving costs for warehousing and service.
Since the unit is already completely equipped, there is
no additional work involved with inserting the optical
coupler.
T
o
a
llow even more flexibilit
y
,
a
ll individual
components (base terminal block, optical coupler or
relay) can also be ordered separately and combined
“…6”
8
individuall
y
.
Input voltages of 24 V to 230 V
(IEC)
rigid
solid
flexible
stranded
I
U
[mm
2
]
AWG
24-14
[A] [V]
PLC-OS
P
.
.. on the control side is, like the proven
screw clamp versions, available in all conventional
industrial voltages from 24 V to 230
V
. A
f
urther
advantage is the ready-integrated input circuit. It
consists of a status display and polarity reversal
protection function, and guarantees that the operational
status is displayed clearl
y
,
a
lso preventing destruction
of the optical electronics should the polarity be
accidentally reversed.
Connection data
* The electrical data are determined by the relay.
0.2-2.5
0.2-1.5
*
*
A2
A1
13+
14
Efficient miniature optical couplers
Despite its small dimensions, the PLC miniature
optical coupler is unusually efficient, has the typical
sturdiness of optical couplers and is the instrument of
choice especially with high operating frequencies:
– Switching capacity of up to 24 V DC/2 A, depending
on the type,
6,2
80
– IP 67-protected fully encapsulated optical electronics,
– 2.
kV
electrical insulation between input/output,
rms
– Input or power optical couplers can be supplied as
alternatives,
– Wear-resistant switching,
– Insensitive to vibration and shock.
The optical coupler is securely anchored by an
engagement lever. In the unlikely event of the optical
coupler needing to be repaired, it can be disengaged,
and – without disconnecting the wiring – replaced
quickly and economicall
y
.
contact 13 on the load side, the continuous plug-in
bridges, which can be cut to length as desired, or the 2-
position jumper plugs guarantee quick, economical and
fault-free wiring, whilst providing utmost clarit
y
.
T
his
Plug-in bridges save wiring
A big plus for cunning wiring professionals is the
convenient plug-in bridge system FBS
T
.
W
hether there
makes complicated, time-consuming loop bridges a
is an A1/A2 ground on the control side, or supply at
thing of the past!
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 3 of 14
Universal PLC Interface with Optical Coupler
– now also with spring cage connection system!
Input
Description
voltage
Type
Orde
r
N
o.
Pcs./ Pkt.
1
U
N
)
PLC interface,
consisting of
base terminal block PLC-BSP…/21 and
pluggable miniature optical coupler
(see catalog part 6, page 33),
for mounting on
3
equipped with
input optical coupler
PLC-OSP- 24DC/48DC/100
PLC-OSP-120UC/48DC/100
PLC-OSP-230UC/48DC/100
24 V DC
29 67 54 9
29 67 55 2
29 67 56 5
10
10
10
120 V AC/110 V DC
230 V AC/220 V DC
2
)
PLC interface,
consisting of
base terminal block PLC-BSP…/21 and
pluggable miniature optical coupler
(see catalog part 6, page 33),
for mounting on
3
equipped with
power optical coupler
PLC-OSP- 24DC/24DC/2
PLC-OSP-120UC/24DC/2
PLC-OSP-230UC/24DC/2
24 V DC
29 67 47 1
29 67 48 4
29 67 49 7
10
10
10
120 V AC/110 V DC
230 V AC/220 V DC
2
)
Technical data
Input optical coupler
Power optical coupler
Input data
Nominal input voltage U
N
24 V DC
120 V AC/
110 V DC
230 V AC/
220 V DC
2
0.8-1.1
0.8 x U
N
0.3 x U
N
4 mA
24 V DC
120 V AC/
110 V DC
230 V AC/
220 V DC
2
0.8-1.1
0.8 x U
N
0.25 x U
N
4 mA
6 ms
10 ms
10 Hz
)
)
Permissible range (in reference to U
N
)
Switching level
1-Signal (“H”)
0-Signal (“L”)
Typ. input current at U
N
Typ. turn-on time for U
N
Typ. turn-off time for U
N
Transmission frequency f
limit
Input circuit
0.8-1.2
0.8 x U
N
0.4 x U
N
8 mA
20 µs
300 µs
300 Hz
0.8-1.2
0.8 x U
N
0.4 x U
N
9 mA
20 µs
500 µs
300 Hz
6 ms
10 ms
10 Hz
24 V DC
24, 120, 230 V AC/DC
operation indicator, polarity protection diode, damping diode
operation indicator, bridge rectifier
Output data
PLC-O…/48DC/100
48 V DC
3 V DC
PLC-O…/24DC/2
33 V DC
3 V DC
2 A (see derating curve
catalog part 6, page 27)
15 A (10 ms)
Max. switching voltage
Min. switching voltage
Limiting continuous current
100 mA
Max. inrush current
Min. switching current
Output connection
Output circuit
–
–
–
2-conductor floating
polarity reversal protection and surge voltage protection
2-conductor floating
Voltage drop at max. limiting continuous current
≤
1 V
≤
200 mV
General data
Test voltage input/output
Ambient temperature range
Duty type rating
2.5 kV, 50 Hz, 1 min.
– 20 °C to + 60 °C
100 % ED
Inflammability class
Standards/regulations
V0 in acc. with UL 94
IEC 664/IEC 664 A/DIN VDE 0110,
contamination class 2, surge voltage protection category III,
as desired, in rows with zero spacing
spring cage connection
Installation position/assembly
Type of connection
1
) Further input voltages available on request.
Notes:
2
) For voltages higher than 250 V (e.g. L1, L2, L3) between identical
terminal blocks of adjacent modules, the PLC-ATP separating plate
(see catalog part 6, page 34) should be installed.
Type of housing: polyamide
P
A
n
on-reinforced,
Color: green, see catalog part 6, page 149
Marking systems and mounting material, see catalog part 3/4.
The rated cross section (see catalog part 6, page 151) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must be
dampened with an effective protection circuit.
Due to the input circuit integrated in the base terminal block (see
catalog part 6, page 33), a 60 V optical coupler, OTP-60DC/…, is
used with the 120 V and 230 V modules.
The PLC-ATP separating plate must always be installed at the
beginning and end of a PLC terminal strip.
For protective isolation between identical terminal blocks of
adjacent modules, the PLC-ATP separating plate (see catalog part
6, page 34) should be installed.
PHOENIX CONTACT page 4 of 14
PLC Actuator Interface with Relay
– now also with spring cage connection system!
In interface applications between the PLC and
actuators, such as motors, contactors, or solenoid
valves, only an N/O contact is normally required. Here,
people turn directly to the PLC-RS
P
.
..ACT output
interface, specially optimized for these applications and
consisting of a 6.2 mm base terminal block and
pluggable miniature rela
y
.
I
n addition to the proven
screw clamp connection version, the actuator interface
is now available with
spring cage connections
. The
wiring , diagonally from above, is particularly convenient
during assembl
y
.
A
lternativel
y
,
t
he actuator interface
can also be supplied with a miniature optical coupler.
No need for output terminal blocks
Unlike conventional coupling relays, all the actuator
connections, including the load return line (!), are
connected directly to the PLC actuator interface. PLC-
RS
P
.
..ACT can thus be used directly as an output
terminal strip with integrated interface function for the
outgoing actuator cables, without the need for additional
modular terminal blocks. (See also structural diagram in
catalog part 6, page 28.)
“…6”
8
(IEC)
rigid
solid
flexible
stranded
I
U
[mm
2
]
AWG
24-14
[A] [V]
Assessment of savings:
Connection data
0.2-2.5
0.2-1.5
*
*
– Elimination of the costs of two output terminal blocks
for switching and load return lines,
* The electrical data are determined by the relay.
– Space savings of approx. 80%,
– Time saving approx. 60%,
– Reduction in wiring thanks to plug-in bridges.
Optimum use of plug-in bridges.
A2
A1
13
The actuator interface attains the maximum degree of
efficiency with the convenient FBST plug-in bridge
system. PLC-RS
P
.
..ACT makes effective use of the
bridging facilities for the A1/A2 connection on the coil
side, for the load supply at connection 13 on the contact
side, and for the load return line. Especially effective
here are the 500 mm long color-insulated continuous
bridges that can easily be cut to the required length and
inserted in the bridge shafts in a flash. No stripping, no
pressing on of ferrules, no connecting. This makes
complicated, time-consuming loop bridges a thing of the
past!
BB
14
6,2
80
Assessment of savings:
– Reduction in wiring by eliminating the need for
modular terminal blocks and using all bridging
facilities: approx. 60%.
Further advantages:
PLC-RS
P
.
..ACT naturally offers the same benefits as
all other PLC series with relay:
– Available either as gold or power contact rela
y
,
– Integrated input circuit,
engagement lever,
– Operational safety with IP67-protected relays
– Reliable isolation acc. to DIN VDE 0106-101
– User-specific marking
– Switching capacity up to 250 V AC/6 A,
– The relay can be removed for replacement using the
– Inflammability class V0 in acc. with UL94.
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 5 of 14
PLC Actuator Interface with Relay
– now also with spring cage connection system!
Input
Description
voltage
U
N
Type
Orde
r
N
o.
29 67 34 5
Pcs./ Pkt.
10
PLC interface,
consisting of
base terminal block PLC-BSP…ACT and
pluggable miniature relay
equipped with
power contact relay
PLC-RSP- 24DC/ACT
24 V DC
2
)
(see catalog part 6, page 32),
3
for mounting on
Technical data
Input data
Nominal input voltage U
N
Permissible input voltage range
Typ. input current at U
N
Typ. response time at U
N
Typ. release time at U
N
Input circuit
24 V DC
see diagram catalog part 6, page 25
9 mA
5 ms
8 ms
24 V DC
operation indicator, polarity protection diode, damping diode
Output data
Contact type
Contact material
Max. switching voltage
Min. switching voltage
Limiting continuous current
Max. inrush current
Min. switching current
Max. power rating, ohmic load:
single contact, 1 N/O contact
4
)
AgSnO
250 V AC/DC
2
12 V AC/DC
6 A
)
on request
10 mA
140 W
20 W
18 W
23 W
40 W
1500 VA
120 mW
24 V DC
48 V DC
60 V DC
110 V DC
220 V DC
250 V AC
Min. switching capacity
General data
Test voltage input/output
Ambient temperature range
Duty type rating
4 kV, 50 Hz, 1 min.
– 20 °C to + 60 °C
100 % ED
Inflammability class
Mechanical service life
Standards/regulations
V0 in acc. with UL 94
10
7
cycles
IEC 664/IEC 664 A/DIN VDE 0110, contamination class 3,
Surge voltage category III, DIN VDE 0160 (in relev. parts),
IEC 255/DIN VDE 0435 (in relev. parts), DIN VDE 0106-101: 1986-11,
increased insulation I/O
3
)
Installation position/assembly
Type of connection
as desired, in rows with zero spacing
spring cage connection
1
) Further input voltages available on request.
Notes:
2
) For voltages higher than 250 V (e.g. L1, L2, L3) between identical
terminal blocks of adjacent modules, the PLC-ATP separating plate
(see catalog part 6, page 34) should be installed.
3
) For
protective isolation between identical terminal blocks of adjacent
modules, the PLC-ATP separating plate (see catalog part 6, page
34) should be installed.
Type of housing: polyamide
P
A
n
on-reinforced,
Color: green, see catalog part 6, page 149
Marking systems and mounting material, see catalog part 3/4.
The rated cross section (see catalog part 6, page 151) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must be
dampened with an effective protection circuit.
4
) N/C contact on request.
The PLC-ATP separating plate (see catalog part 6, page 34) must
always be installed at the beginning and end of a PLC terminal
strip.
PHOENIX CONTACT page 6 of 14
PLC Actuator Interface with Optical Coupler
– now also with spring cage connection system!
In interface applications between the PLC and
actuators, such as motors, contactors, or solenoid
valves, only an N/O function is normally required. Here,
people turn directly to the PLC-OS
P
.
..ACT output
interface, specially optimized for these applications and
consisting of a 6.2 mm base terminal block and
pluggable miniature optical coupler. In addition to the
proven screw clamp connection version, the actuator
interface is now available with
spring cage
connections
. The wiring , diagonally from above, is
particularly convenient during assembl
y
.
A
lternativel
y
,
the actuator interface can also be supplied with a
miniature rela
y
.
No need for output terminal blocks!
Unlike conventional coupling relays, all the actuator
connections, including the load return line (!), are
connected directly to the PLC actuator interface. PLC-
OS
P
.
..ACT can thus be used directly as an output
terminal strip with integrated interface function for the
outgoing actuator cables, without the need for additional
modular terminal blocks. (See also structural diagram in
catalog part 6, page 28.)
“…6”
8
(IEC)
rigid
solid
flexible
stranded
I
U
[mm
2
]
AWG
24-14
[A] [V]
Connection data
* The electrical data are determined by the relay.
0.2-2.5
0.2-1.5
*
*
Assessment of savings:
– Elimination of the costs of two output terminal blocks
for switching and load return lines,
– Space savings of approx. 80%,
– Time saving approx. 60%,
– Reduction in wiring thanks to plug-in bridges.
A2
A1
13+
BB
Optimum use of plug-in bridges
The actuator interface attains the maximum degree of
efficiency with the convenient FBST plug-in bridge
system. PLC-OS
P
.
..ACT makes effective use of the
bridging facilities for the A1/A2 connection on the coil
side, for the load supply at connection 13 on the contact
side, and for the load return line. Especially effective
here are the 500 mm long color-insulated continuous
bridges that can easily be cut to the required length and
inserted in the bridge shafts in a flash. No stripping, no
pressing on of ferrules, no connecting. This makes
complicated, time-consuming loop bridges a thing of the
past!
14
6,2
80
Assessment of savings:
– Reduction in wiring by eliminating the need for
modular terminal blocks and using all bridging
facilities: approx. 60%.
Further advantages:
– Input or power optical coupler can be supplied,
– Optical coupler can be removed for replacement
using the engagement lever,
PLC-OS
P
.
..ACT naturally offers the same benefits as
all other PLC series with optical coupler:
– Switching capacity of up to 24 V DC/2 A, depending
on the type,
– Wear-resistant switching,
– Integrated input circuit,
– IP67-protected fully encapsulated optical electronics,
– Insensitive to vibration and shock,
– User-specific marking
– Inflammability class V0 in acc. with UL94.
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 7 of 14
PLC Actuator Interface with Optical Coupler
– now also with spring cage connection system!
Input
Description
voltage
Type
Orde
r
N
o.
29 67 50 7
Pcs./ Pkt.
10
1
U
N
)
PLC interface,
consisting of
base terminal block PLC-BSP…ACT and
pluggable miniature optical coupler
(see catalog part 6, page 33),
for mounting on
3
equipped with
power optical coupler
PLC-OSP- 24DC/24DC/2/ACT
24 V DC
Technical data
Input data
Nominal input voltage U
N
Permissible range (in reference to U
N
)
Switching level
1 signal (“H”)
0 signal (“L”)
Typ. input current at U
N
Typ. turn-on time for U
N
Typ. turn-off time for U
N
Transmission frequency f
limit
Input circuit
24 V DC
0.8-1.2
0.8 x U
N
0.4 x U
N
8 mA
20 µs
300 µs
300 Hz
24 V DC
operation indicator, polarity protection diode, damping diode
Output data
Max. switching voltage
Min. switching voltage
Limiting continuous current
Max. inrush current
33 V DC
3 V DC
2 A (see derating curve, catalog part 6, page 27)
15 A (10 ms)
Output connection
2-conductor floating
Output circuit
Voltage drop at max. limiting continuous current
polarity reversal protection and surge voltage protection
≤
200 mV
General data
Test voltage input/output
Ambient temperature range
Duty type rating
2.5 kV, 50 Hz, 1 min.
– 20 °C to + 60 °C
100 % ED
Inflammability class
Standards/regulations
V0 in acc. with UL 94
IEC 664/IEC 664 A/DIN VDE 0110,
contamination class 2, surge voltage protection category III,
as desired, in rows with zero spacing
spring cage connection
Installation position/assembly
Type of connection
1
) Further input voltages available on request.
Notes:
Type of housing: polyamide
P
A
n
on-reinforced,
Color: green, see catalog part 6, page 149
Marking systems and mounting material, see catalog part 3/4.
The rated cross section (see catalog 6, page 151) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must be
dampened with an effective protection circuit.
The PLC-ATP separating plate must always be installed at the
beginning and end of a PLC terminal strip.
For protective isolation between identical terminal blocks of
adjacent modules, the PLC-ATP separating plate (see catalog part
6, page 34) should be installed.
PHOENIX CONTACT page 8 of 14
PLC Sensor Interface with Relay
– now also with spring cage connection system!
In interface applications between the PLC and
sensors, such as proximity switches, limit switches, or
auxiliary contacts, often only an N/O function is
required. Here, people turn directly to the PLC-
RS
P
.
..SEN input interface, specially optimized for these
applications and consisting of a 6.2 mm base terminal
block and pluggable miniature rela
y
.
I
n addition to the
proven screw clamp connection version, the sensor
interface is now available with
spring cage
connections
. The wiring , diagonally from above, is
particularly convenient during assembl
y
.
No need for input terminal blocks
Unlike previous input relays, all the sensor
connections, including the voltage supply for the
sensors/switches (!), are connected directly to the PLC
sensor interface. PLC-RS
P
.
..SEN can thus be used
directly as a terminal strip with integrated interface
function for the incoming sensor cables, without the
need for additional modular terminal blocks. (See also
structural diagram in catalog part 6, page 30.)
Assessment of savings:
– Elimination of the costs of two (three) modular
terminal blocks for sensor/switch suppl
y
,
s
ignal and
sensor ground (in the case of three-conductor
initiators).
“…6”
8
(IEC)
rigid
solid
flexible
stranded
I
U
[mm
2
]
AWG
24-14
[A] [V]
Connection data
* The electrical data are determined by the relay.
0.2-2.5
0.2-1.5
*
*
– Space savings of approx. 80 %,
– Time saving approx. 60 %,
– Reduction in wiring thanks to plug-in bridges.
13
14
A2
Optimum use of plug-in bridges.
The sensor interface attains the maximum degree of
efficiency with the convenient FBST plug-in bridge
system. PLC-RS
P
.
..SEN makes effective use of the
bridging facilities for the sensor/switch voltage suppl
y
,
for the supply and sensor ground at the A2 connection,
and for the common supply potential of the PLC at
connection 13. No stripping, no pressing on of ferrules,
no connecting. This makes complicated, time-
consuming loop bridges a thing of the past!
Assessment of savings:
BB
A1
6,2
80
– Reduction in wiring by eliminating the need for
modular terminal blocks and using all bridging
facilities: approx. 60 %.
Further advantages:
PLC-RS
P
.
..ACT naturally offers the same benefits as
all other PLC series with relay:
– Switching capacity up to 250 V AC/6 A,
– Integrated input circuit,
– Reliable isolation acc. to DIN VDE 0106-101
– User-specific marking
– Available either as gold or power contact rela
y
,
– The relay can be removed for replacement using the
engagement lever,
– Inflammability class V0 in acc. with UL94.
– Operational safety with IP67-protected relays,
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 9 of 14
for mounting on
for mounting on
PLC Sensor Interface with Relay
– now also with spring cage connection system!
Input
Description
voltage
Type
Orde
r
N
o.
Pcs./ Pkt.
1
U
N
)
PLC interface,
consisting of
base terminal block PLC-BSP…SEN and
pluggable miniature relay
equipped with universal
multi-layer contact relay
PLC-RSP- 24DC/1AU/SEN
PLC-RSP-120UC/1AU/SEN
PLC-RSP-230UC/1AU/SEN
24 V DC
120 V AC/110 V DC
230 V AC/220 V DC
2
)
29 67 37 4
29 67 39 0
29 67 41 3
10
10
10
(see catalog part 6, page 32),
3
PLC interface,
consisting of
base terminal block PLC-BSP…SEN and
pluggable miniature relay
equipped with
power contact relay
PLC-RSP- 24DC/1/SEN
PLC-RSP-120UC/1/SEN
PLC-RSP-230UC/1/SEN
24 V DC
120 V AC/110 V DC
230 V AC/220 V DC
2
)
29 67 36 1
29 67 38 7
29 67 40 0
10
10
10
(see catalog part 6, page 32),
3
Technical data
Input data
Nominal input voltage U
N
24 V DC
120 V AC/
110 V DC
230 V AC/
220 V DC
2
)
Permissible input voltage range
Typ. input current at U
N
Typ. response time at U
N
Typ. release time at U
N
Input circuit
see diagram catalog part 6, page 25
9 mA
5 ms
8 ms
3.5/3 mA
6 ms
15 ms
3 mA
7 ms
15 ms
24 V DC
120, 230 V AC/DC
operation indicator, polarity protection diode, damping diode
operation indicator, bridge rectifier
Output data
Contact type
Contact material
Max. switching voltage
Min. switching voltage
Limiting continuous current
Max. inrush current
Min. switching current
Max. power rating, ohmic load:
PLC-R…/1/SEN
PLC-R…/1AU/SEN
Single contact, 1 N/O contact
5
)
AgSnO
Single contact, 1 N/O contact
5
)
AgSnO + 5 µ Au
3
)
30 V AC/36 V DC
100 mV
50 mA
50 mA
1 mA
1.2 W
–
–
–
–
–
250 V AC/DC
2
12 V AC/DC
6 A
)
on request
10 mA
140 W
20 W
18 W
23 W
40 W
1500 VA
120 mW
24 V DC
48 V DC
60 V DC
110 V DC
220 V DC
250 V AC
Min. switching capacity
100 µW
General data
Test voltage input/output
Ambient temperature range
Duty type rating
4 kV, 50 Hz, 1 min.
– 20 °C to + 55 °C (24 V types to +60 °C)
100 % ED
Inflammability class
Mechanical service life
Standards/regulations
V0 in acc. with UL 94
10
7
cycles
IEC 664/IEC 664 A/DIN VDE 0110, contamination class3,
Surge voltage category III, DIN VDE 0160 (in relev. parts),
IEC 255/DIN VDE 0435 (in relev. parts), DIN VDE 0106-101: 1986-11,
increased insulation I/O
4
)
Installation position/assembly
Type of connection
as desired, in rows with zero spacing
spring cage connection
1
) Further input voltages available on request.
Notes:
2
) For voltages higher than 250 V (e.g. L1, L2, L3) between identical
terminal blocks of adjacent modules, the PLC-ATP separating plate
(see catalog part 6, page 34) should be installed.
3
) If the maximum values indicated are exceeded, the gold layer is
destroyed. The values of the AgSnO contact are then valid.
4
) For
protective isolation between identical terminal blocks of adjacent
modules, the PLC-ATP separating plate (see catalog part 6, page
34) should be installed.
Type of housing: polyamide
P
A
n
on-reinforced,
Color: green, see catalog part 6, page 149
Marking systems and mounting material, see catalog part 3/4.
The rated cross section (see catalog part 6, page 151) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must be
dampened with an effective protection circuit.
Due to the input circuit integrated in the base terminal block (see
catalog part 6, page 32), a 60 V relay, REL-MR-60DC/…, is used with
the 120 V and 230 V modules.
5
) N/C contact on request.
The PLC-ATP separating plate (see catalog part 6, page 34) must
always be installed at the beginning and end of a PLC terminal
strip.
PHOENIX CONTACT page 10 of 14
PLC Sensor Interface with Optical Coupler
– now also with spring cage connection system!
In interface applications between the PLC and
sensors, such as proximity switches, limit switches, or
auxiliary contacts, often only an N/O function is
required. Here, people turn directly to the PLC-
OS
P
.
..SEN input interface, specially optimized for these
applications and consisting of a 6.2 mm base terminal
block and pluggable miniature optical coupler. In
addition to the proven screw clamp connection version,
the sensor interface is now available with
spring cage
connections
. The wiring , diagonally from above, is
particularly convenient during assembl
y
.
No need for input terminal blocks
Unlike previous input optical couplers, all the sensor
connections, including the voltage supply for sensors/
switches (!), are connected directly to the PLC sensor
interface. PLC-OS
P
.
..SEN can thus be used directly as
a terminal strip with integrated interface function for the
incoming sensor cables, without the need for additional
modular terminal blocks. (See also structural diagram in
catalog part 6, page 30.)
“…6”
8
(IEC)
rigid
solid
flexible
stranded
I
U
[mm
2
]
AWG
24-14
[A] [V]
Assessment of savings:
– Elimination of the costs of two (three) modular
terminal blocks for sensor/switch suppl
y
,
s
ignal and
sensor ground (in the case of three-conductor
initiators).
Connection data
* The electrical data are determined by the relay.
0.2-2.5
0.2-1.5
*
*
– Space savings of approx. 80 %,
– Time saving approx. 60 %,
– Reduction in wiring thanks to plug-in bridges
13+
14
A2
Optimum use of plug-in bridges.
The sensor interface attains the maximum degree of
efficiency with the convenient FBST plug-in bridge
system. PLC-OS
P
.
..SEN makes effective use of the
bridging facilities for the sensor/switch voltage suppl
y
,
for the supply and sensor ground at the A2 connection,
and for the common supply potential of the PLC at
connection 13. Especially effective here are the 500 mm
long color-insulated continuous bridges that can easily
be cut to the required length and inserted in the bridge
shafts in a flash. No stripping, no pressing on of
ferrules, no connecting. This makes complicated, time-
consuming loop bridges a thing of the past!
Assessment of savings:
BB
A1
6,2
80
– Reduction in wiring by eliminating the need for
modular terminal blocks and using all bridging
facilities: approx. 60 %.
Further advantages:
– Integrated input circuit,
PLC-OS
P
.
..SEN naturally offers the same benefits as
– Input or power optical coupler can be supplied,
all other PLC series with optical coupler:
– Switching capacity of up to 24 V DC/2 A, depending
on the type,
– IP67-protected fully encapsulated optical electronics,
– Insensitive to vibration and shock,
– User-specific marking
– Wear-resistant switching,
– Inflammability class V0 in acc. with UL94.
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 11 of 14
PLC Sensor Interface with Optical Coupler
– now also with spring cage connection system!
Input
Description
voltage
Type
Orde
r
N
o.
Pcs./ Pkt.
1
U
N
)
PLC interface,
consisting of
base terminal block PLC-BSP…SEN and
pluggable miniature optical coupler
(see catalog part 6, page 33),
for mounting on
3
equipped with
input optical coupler
PLC-OSP- 24DC/48DC/100/SEN
PLC-OSP-120UC/48DC/100/SEN
PLC-OSP-230UC/48DC/100/SEN
24 V DC
29 67 57 8
29 67 58 1
29 67 59 4
10
10
10
120 V AC/110 V DC
230 V AC/220 V DC
2
)
PLC interface,
consisting of
base terminal block PLC-BSP…SEN and
pluggable miniature optical coupler
(see catalog part 6, page 33),
for mounting on
3
equipped with
power optical coupler
PLC-OSP- 24DC/24DC/2/SEN
PLC-OSP-120UC/24DC/2/SEN
PLC-OSP-230UC/24DC/2/SEN
24 V DC
29 67 51 0
29 67 52 3
29 67 53 6
10
10
10
120 V AC/110 V DC
230 V AC/220 V DC
2
)
Technical data
Input optical coupler
Power optical coupler
Input data
Nominal input voltage U
N
24 V DC
120 V AC/
110 V DC
230 V AC/
220 V DC
2
0.8-1,1
0.8 x U
N
0.3 x U
N
4 mA
24 V DC
120 V AC/
110 V DC
230 V AC/
220 V DC
2
0.8-1.1
0.8 x U
N
0.25 x U
N
4 mA
6 ms
10 ms
10 Hz
)
)
Permissible range (in reference to U
N
)
Switching level
1 signal (“H”)
0 signal (“L”)
Typ. input current at U
N
Typ. turn-on time for U
N
Typ. turn-off time for U
N
Transmission frequency f
limit
Input circuit
0.8-1.2
0.8 x U
N
0.4 x U
N
8 mA
20 µs
300 µs
300 Hz
0.8-1.2
0.8 x U
N
0.4 x U
N
9 mA
20 µs
500 µs
300 Hz
6 ms
10 ms
10 Hz
24 V DC
120, 230 V AC/DC
operation indicator, polarity protection diode, damping diode
operation indicator, bridge rectifier
Output data
PLC-O…/48DC/100/SEN
48 V DC
3 V DC
PLC-O…/24DC/2/SEN
33 V DC
3 V DC
2 A (see derating curve
catalog part 6, page 27)
15 A (10 ms)
Max. switching voltage
Min. switching voltage
Limiting continuous current
100 mA
Max. inrush current
–
Min. switching current
–
–
Output connection
2-conductor floating
2-conductor floating
Output circuit
polarity reversal protection and surge voltage protection
Voltage drop at max. limiting continuous current
≤
1 V
≤
200 mV
General data
Test voltage input/output
Ambient temperature range
Duty type rating
2,5 kV, 50 Hz, 1 min.
– 20 °C to +60 °C
100 % ED
Inflammability class
Standards/regulations
V0 in acc. with UL 94
IEC 664/IEC 664 A/DIN VDE 0110,
contamination class 2, surge voltage protection category III,
as desired, in rows with zero spacing
spring cage connection
Installation position/assembly
Type of connection
1
) Further input voltages available on request.
Notes:
2
) For voltages higher than 250 V (e.g. L1, L2, L3) between identical
terminal blocks of adjacent modules, the PLC-ATP separating plate
(see catalog part 6, page 34) should be installed.
Type of housing: polyamide
P
A
n
on-reinforced,
Color: green, see catalog part 6, page 149
Marking systems and mounting material, see catalog part 3/4.
The rated cross section (see catalog part 6, page 151) refers to
untreated conductors without ferrules.
For the protection of input and output, inductive loads must be
dampened with an effective protection circuit.
Due to the input circuit integrated in the base terminal block (see
catalog part 6, page 33), a 60 V optical coupler, OTP-60DC/…, is
used with the 120 V and 230 V modules.
The PLC-ATP separating plate must always be installed at the
beginning and end of a PLC terminal strip.
For protective isolation between identical terminal blocks of
adjacent modules, the PLC-ATP separating plate (see catalog part
6, page 34) should be installed.
PHOENIX CONTACT page 12 of 14
PLC Accessories
Input terminal block PLC-ESK
The 9 mm wide input terminal block PLC-ESK is the
same shape as the PLC interface terminal blocks. It is
groove which allows them to be removed with a
screwdriver.
If bridges with different potentials meet in neighboring
used to feed in bridging potentials. Its nominal current is
functional blocks, the separating plate PLC-
A
T
P should
32 A! When currents are
≤
6 A, they can be fed in
directly at the connecting terminal blocks of one of the
connected PLC interfaces.
be placed between them.
Separating plate PLC-ATP
The PLC-
A
T
P separating plate must always be
installed at the beginning and end of a terminal strip.
In addition to pure visual separation of functional
blocks, it is also necessary in certain cases to place the
Plug-in bridges FBST
The differently colored, insulated plug-in bridges
FBST make optimum use of the advantages of PLC
interfaces
.
T
he 2-position single plug-in bridges FBST 6
separating plate between adjacent PLC interface
are especially suited for bridging a smaller number of
modules and residual currents
≤
6 A. When a circuit is
terminal blocks, e.g. when 3 phases (L1, L2, L3) are
used on the contact side of the PLC relay terminal
supplied from both sides, they offer the advantage that
blocks.
the circuit can be opened at any point, allowing all the
other modules to continue to be supplied at the same
time.
PLC-
A
T
P is equipped with prescored break-out points
at the bridging positions, so that individual bridges can
pass through if necessar
y
.
The 500 mm continuous plug-in bridge FBST 500 is
even more convenient. All bridges are equipped with a
Description
Type
Orde
r
N
o.
29 66 50 8
Pcs./ Pkt.
Input terminal block
, for
the input of up to four potentials,
for mounting on
3
PLC-ESK GY
5
Technical data
Connection cross section:
solid 0.2-4 mm
2
stranded 0.2-4 mm
2
AWG 24-10
Max. current
Max voltage
32 A
250 V AC
1
)
1
) For voltages higher than 250 V
(L1, L2, L3) between identical
terminal blocks of adjacent modules,
the PLC-ATP separating plate should
be installed
Terminal block dim.:
same shape as
PLC standard series,
terminal block width 9 mm
gray
Color
Cont. plug-in bridge
,
I
max
: 32 A
500 mm long, insulated,
can be cut to any length, for
power distribution with PLC…
red
blue
gray
FBST 500-PLC RD
FBST 500-PLC BU
FBST 500-PLC GY
29 66 78 6
29 66 69 2
29 66 83 8
20
20
20
Plug-in bridge, 2-pos.
,
6 mm long, insulated, for
power distribution with PLC
I
max
: 6
A
red
blue
gray
FBST 6-PLC RD
FBST 6-PLC BU
FBST 6-PLC GY
29 66 23 6
29 66 81 2
29 66 82 5
50
50
50
Separating plate
, 2 mm thick, should be installed
at the start and end of a PLC terminal strip.
Furthermore, it is used for:
– visual separation of groups,
– protective separation of different
voltages of neighboring
PLC-ATP BK
29 66 84 1
25
PLC interfaces in acc. with DIN VDE 0106-101,
– separation of neighboring bridges
with different potentials,
– separation of PLC interfaces with
voltages > 250 V
Color: black
Headquarters:
© Phoenix Contact GmbH & Co.
KG
• Flachsmarktstraße 8-28 • 32825 Blomberg • Germany
PHOENIX CONTACT page 13 of 14
PLC Labelling ZB 6
Zack strip ZB 6
This marking system combines the advantage of
In addition to the standard color white, the Zack strip
easy handling with the advantage of a reasonable price.
can also be supplied in other colors (see catalog part 3,
The zack strip consists of 10 individual labels which are
page 36). Marking is either done manually with the M-
joined together and can be easily separated at any
PEN or elegantly with the computer marking system
point. For marking equipment, the labels can be clicked
CMS. Alternativel
y
,
t
he labels can be ordered pre-
into the marker groove of the engagement lever.
The system advantage: economical, quick, optimum
appearance.
printed with numbers, symbols or PLC input and output
numbers.
Description
Type
Orde
r
N
o.
10 51 00 3
Pcs./ Pkt.
10
Zack strip, unprinted:
10-section,
for individual labelling with marker pen
or CMS system, sufficient
ZB 6: UNPRINTED
for labelling 100 PLC interface terminal blocks
as above, however, large batch,
sufficient for labelling
1000 PLC interface terminal blocks
Zack strip, printed horizontally:
2
10-section with consecutive numbers
ZB 6/WH-100: UNPRINTED
50 60 93 5
10 51 01 6
100
10
)
ZB 6, LGS: CONSEC. NUMBERS
ZB 6, LGS: 1-10
ZB 6, LGS: 11-20
etc. to
1-10
11-20
etc. to
991-1000
ZB 6, LGS: 991-1000
Zack strip, printed horizontally:
2
9-section with the numbers
)
)
1-9
ZB 6, LGS: 1-9
10 51 12 6
10 51 03 2
10
10
Zack strip, printed horizontally:
2
10-section with identical numbers
ZB 6, LGS: IDENTICAL NOS.
ZB 6, LGS: 1
ZB 6, LGS: 2
1/1/1
2/2/2
etc. to
etc. to
100/100/100
ZB 6, LGS: 100
Zack strip, printed horizontally:
2
)
10-section
L1, L2, L3, N, PE, L1, L2, L3, N, PE
U, V, W, N,
6
, U, V, W, N,
6
ZB 6, LGS: L1-N, PE
ZB 6, LGS: U-N
10 51 41 4
10 51 43 0
10
10
Zack strip, printed vertically:
2
)
10-section with consecutive numbers
ZB 6, QR: CONSEC. NUMBERS
ZB 6, QR:
1-10
ZB 6, QR:
11-20
etc. to
10 51 02 9
10
1-10
11-20
etc. to
991-1000
ZB 6, QR: 991-1000
Zack strip, printed vertically:
2
10-section with identical numbers
)
ZB 6, QR: IDENTICAL NOS.
ZB 6, QR: 1
ZB 6, QR: 2
10 51 04 5
10
1/1/1
2/2/2
etc. to
etc. to
100/100/100
ZB 6, QR: 100
Zack strip, printed vertically:
2
10-section with PLC input numbers
e.g.: I 0.0 to I 0.7 (to max. E 127.7)
Zack strip, printed vertically:
2
10-section with PLC output numbers
e.g.: O 0.0 to O 0.7 (to max. A 127.7)
)
ZB 6, QR: PLC INPUT…
1
)
ZB 6, QR: PLC OUTPUT…
1
)
ZB 6: SO/CMS…
3
)
10 51 45 6
10 51 44 3
10 50 49 9
10
10
1
)
Zack strip, special printing
,
10-section, divisible, marked according to customer requirements
1
) Please specify the required marking with order.
2
) 10 identically marked strips form a
packing unit (PU).
Marking direction: horizontal “LGS” or vertical “QR”,
see catalog part 3/4.
3
) Please specify the required marking and color with order.
PHOENIX CONTACT page 14 of 14
