2pcs HiLetgo OV7670 Camera Module

The HiLetgo OV7670 Camera Module is a compact and affordable camera module based on the OV7670 CMOS image sensor. It offers VGA resolution (640×480 pixels) and can capture images at a maximum frame rate of 30 frames per second (fps).

Specifications:

• Image Sensor: OV7670 CMOS image sensor
• Resolution: VGA (640×480 pixels)
• Maximum Frame Rate: 30 frames per second (fps)
• Output Format: Raw RGB, YUV (422/420) or YCbCr (4:2:2)
• Lens: Typically includes an onboard lens (focus may be adjustable)
• Signal Output: SCCB (Serial Camera Control Bus) interface for configuration and control
• Interface: Parallel or serial (commonly uses SCCB or I2C)
• Power Supply: Typically operates on 3.3V or 5V DC
• Operating Temperature: Usually between -30°C to 70°C
• Dimensions: Compact module size, often around 3cm x 3cm

Pin Definition:

• 3V3—–Input power supply voltage (3.3,5V is recommended but not recommended)
• GDN—–grounding point
• SIO_C—Control clock of SCCB interface (Note: Some low-level microcontrollers require pull-up-control, similar to I2C interface)
• SIO_D— Serial data input (out) side of SCCB interface (Note: Some low-level microcontrollers need pull-up control, similar to I2C interface)
• VSYNC—frame synchronization signal (output signal)
• HREF—-Line synchronization signal (output signal)
• PCLK—-pixel clock (output signal)
• D0-D7—Data port (output signal)
• RESTE—Reset port (normal use pull up)
• PWDN—-power consumption selection mode (normal use low) For OV7670 with fifo please contact us