Current To Voltage Module(0-20mA/0-10V)

Current To Voltage Module（0-20mA/4-20mA to 0-3.3V/0-5V/0-10V）

Description

In the process of circuit signal transmission, the voltage signal will weaken with the increase of the transmission distance, and the current transmission can avoid the weakening of the signal. The Current To Voltage module is used for the end of current signal transmission, the signal is converted into voltage signal for SCM detection. The current input supports 4-20mA and 0-20mA, and the voltage output supports 0-3.3V/0-5V/0-10V.

Instructions For Use

The module is wired as defined, and the supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V).After power-on, the D2 light should be on, otherwise check the line connection. The board is reversely protected, and the reverse connection does not burn.When the current input is at the minimum value (0 mA or 4 mA), adjust the ZERO potentiometer to make the VOUT output the minimum value (0.0V or other voltage).When the current input is at the maximum value (20mA), adjust the SPAN potentiometer to make the VOUT output the maximum (3.3V or 5V or 10V, when the input is 4-20ma, the output can be as small as 2.5V).

According to your needs, select the appropriate range through the jumper cap:

4–20mA:
0–2.5V range: J1 1, 2 feet shorted, 3, 4 feet shorted
0–3.3V range: J1 1, 2 feet are disconnected, 3, 4 feet are disconnected
0–5.0V range: J1 1, 2 feet shorted, 3, 4 feet shorted
0–10.0V range: J1 1, 2 feet shorted, 3, 4 feet disconnected

0–20mA:
0–3.3V range: J1 1, 2 feet shorted, 3, 4 feet shorted
0–5.0V range: J1 1, 2 feet shorted, 3, 4 feet shorted
0–10.0V range: J1 1, 2 feet shorted, 3, 4 feet disconnected

Product Details