DC 12V 24V 20W DY-HV8F Voice Play Module Support MP3 WAV For Arduino

$9.99

  • DY-HV8F intelligent voice module integrates I/O segmentation trigger, UART serial port control, ONE_line single bus serial port control, standard MP3 control mode, and can be set through the power-on module.
  • The Onboard 20W class D power amplifier circuit can directly drive an 8ohm/10W or 4ohm/20W speaker. Support MP3 and WAV decoding formats. Support 64-bit (8Mbyte) flash memory.
  • Audio files can be updated by connecting to a computer via a USB cable. 3.5mm audio interface, Micro USB download interface, and button module are combined into one. Support UART serial port control voice broadcast function.
  • The voice module can control functions such as play, pause, next, previous, volume addition and subtraction, and a maximum of 65535 songs can be selected. Baud rate 9600bit/s.
  • Support sampling frequency (KHz): 8/11.025/12/16/22.05/24/32/44.1/48. 24-bit DAC output, dynamic range supports 90dB, signal-to-noise ratio supports 85 dB. Support 3 configuration I/O mode selection, realize 7 working modes.

Quick RFQ

The DY-HV8F Voice Play Module is a type of electronic module designed for playing audio recordings. It typically consists of a microcontroller or dedicated integrated circuit (IC) that can store and playback audio files stored in its memory.

Product information

  • Compatible Devices: Personal Computer
  • Brand: PEMENOL
  • Hardware Interface: USB
  • Microphone Form Factor: Built-In
  • Format: MP3 Audio, WAV
  • Headphones Jack: 3.5 millimeters
  • Memory Storage Capacity: 8 MB
  • Microphone Operation Mode: Mono
  • Product Dimensions: 1.97 x 1.97 x 0.2 inches
  • Item Weight: 0.317 ounces
  • ASIN: B0BRRTHCPC
  • Item model number: GY16922

 

 

Specifications

  • Support sample rate (KHz): 8 / 11.025 / 12 / 16 / 22.05 / 24 / 32 / 44.1 / 48
  • 24-bit DAC output with 90dB dynamic range and 85dB signal-to-noise ratio.
  • DC 6~35V ultra-wide operating voltage.
  • Integrated 64Mbit (8M bytes) FLASH memory, no memory card required.
  • Integrated high-power amplifier output, driving 4 Ω speakers maximum output of 20W, driving 8 Ω speakers maximum output of 10W.
  • UART serial port controls voice announcement function, can control the playback, pause, select songs, volume up and down functions, the maximum selection of 65535 tracks, and baud rate of 9600 bit/s.
  • Support IO one-to-one trigger playback, 8 IO ports can trigger 8 tracks or 8 IO ports can trigger 255 tracks.
  • Supports One-line serial port control, which can control play, pause, song selection, volume up/down, etc.
  • Supports 3 configurable IOs for up to 7 operating modes, toggle switch settings, easy to operate.
  • 8-channel IO design ESD protection
  • Hole pitch: 45(L) x 45(W)mm / Ø3mm

 

 

Series

DY-HV8F