Sensata-Tech-DAR72410
| Part # | Sensata-Tech-DAR72410 |
Download  | Sensata-Tech-DAR72410 |
|
D SERIES
HIGH VOLTAGE RELAYS 10KV & 15KV
Very high isolation voltages, up to 15k
V
,
a
re achieved through the use
of high vacuum reed switches with either rhodium or tungsten contacts
and make these relays suitable for high reliability applications, such as
cardiac defibrillators, test equipment and high voltage power supplies.
The rhodium contact relays have low contact resistance, while the
tungsten contact relays can switch higher voltages.
PCB or panel mount, via nylon studs, versions are available.
Connection options, for the H
V
,
i
nclude PCB, solder turret (wire wrap),
flying lead and 0.25” spade terminals.
Features
• 10kV or 15kV Isolation
• Low contact resistance
• PCB or panel mount
• HV connections via flying leads, solder turret (wire wrap),
or 1/4” spade terminals
• Excellent AC characteristics
SPECIFICATIONS
Units
Condition
10kV SPNO
10kV SPNC
15kV SPNO
Contact
Rhodium
Tungsten
Rhodium
Tungsten
Tungsten
Contact Material
kV
W
V
DC or AC peak
10
50
10
50
10
50
10
50
15
50
Isolation Across Contacts
Switching Power Max.
Switching Voltage Max.
Switching Current Max.
Carry Current Max
DC or AC peak
DC or AC peak
DC or AC peak
1000
3
7000
2
1000
3
7000
2
10000
2
A
A
4
3
4
3
2
Capacitance Across
Contacts
coil to screen
grounded
pF
<0.2
<0.2
<0.2
<0.2
<0.2
operations
dry switching
50W switching
max (typical)
min (typical)
10
9
10
6
10
9
10
6
10
9
10
6
10
9
10
6
10
9
10
6
Lifetime
50 (15)
250 (100)
50 (15)
250 (100)
250 (100)
10
10
(10
13
)
Contact Resistance
m
Ω
Ω
10
10
(10
13
)
10
10
(10
13
)
Insulation Resistance
Page 1
Copyright © 2023 Sensata Technologies, Inc.
Units
Condition
10kV SPNO
10kV SPNC
15kV SPNO
5V
3.7
0.5
3.0
2.0
28
12V
9
24V
20
5V
3.7
0.5
2.0
3.0
38
12V
9
24V
20
5V
3.7
0.5
3.0
2.0
16
12V
9
24V
20
Coil
V
V
DC
Must Operate Voltage
Must Release Voltage
Operate Time
Release Time
Resistance
DC
1.25
3.0
2.0
150
4
1.25
2.0
3.0
240
4
1.25
3.0
2.0
95
4
ms
ms
diode fitted
diode fitted
3.0
2.0
780
2.0
3.0
925
3.0
2.0
350
Ω
Note. The operate / release voltage and coil resistance will change at a rate of 0.4% per degree C. Values are stated at room temperature (20 degrees C)
Relay
kV
DC or AC peak
min (typical)
17
17
17
Isolation Contact/Coil
Insulation Resistance
Contact to all Terminals
10
10
(10
13
)
10
10
(10
13
)
10
10
(10
13
)
Ω
Environmental Conditions
Operating Temp Range
ºC
-20 to +70
-20 to +70
-20 to +70
Please refer to this document for circuit design notes:
DIMENSIONS
All dimensions are in millimeters.
Page
2
Copyright © 2023 Sensata Technologies, Inc.
Please refer to this document for circuit design notes:
Page
3
Copyright © 2023 Sensata Technologies, Inc.
Example : DAT71210F
ORDERING OPTIONS
D
A
T
7
12
10
F
Reed Switch Size
Contact Form
A =
n/o
B =
n/c
Contact Material
R =
Rhodium
T =
Tungsten
Moulding Ref. No.
Coil Voltage
05 =
5Vdc
12 =
12Vdc
24 =
24Vdc
Isolation Between Contacts
10 =
10kV
15 =
15kV
Mounting or Connection Style
No suffix indicates PCB mount
F =
PCB mount & coil connection with Flying lead HV connection
P =
Panel mount with wire wrap terminals
S =
PCB mount & coil connection with stud fixing & 1/4” spade HV connection (not available on 15kV models)
T =
PCB mount & coil connection with stud fixing & wire wrap HV connection
Page 4
Made in the UK
Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties
(“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands
and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems
and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not
conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may
make corrections, enhancements, improvements, and other changes to its datasheets or components without notice.
Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER,
NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY
RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA
DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS
OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTOR
Y
,
I
NCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS
ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILIT
Y
,
F
ITNESS FOR A PARTICULAR PURPOSE, QUIET
ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD
TO SENSATA DATASHEETS OR USE THEREOF.
CONTACT US
+44 (0)1202 897969
Cynergy3 Components Ltd.
7 Cobham Road,
Ferndown Industrial Estate,
Wimborne, Dorset,
BH21 7PE, United Kingdom
LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT
IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATOR
Y
,
A
ND SAFETY-RELATED REQUIREMENTS CONCERNING
ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED
INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.
Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA
Copyright © 2023 Sensata Technologies, Inc.
ISO9001CERTIFIED
Rev: 08/22/23
