Sensata-Tech-L522F
| Part # | Sensata-Tech-L522F |
Download  | Sensata-Tech-L522F |
•
Low Profile
•
4 Different Circuits to Choose from
•
Designed for printed Circuit Board Connections
•
UL Recognized E72445
AVAILABLE OPTIONS
Circuit Type
1 2 4 5
(see schematic
Free Wheeling Diode
Blank:
Not Included
F:
Included
Series
diagrams)
(Circuits 1 & 2 only)
L
5
1
2
F
Load Current
AC Line Voltage
1:
120 VAC
3:
15 Amps
4:
20 Amps
5:
25 Amps
6:
42.5 Amps
2:
240 VAC
3:
280 VAC
4:
480 VAC
(Not for Circuit 4)
Required for valid part number
NOTE: Not all Combinations available
For options only and not required for valid part number
ELECTRICAL SPECIFICATIONS
Description
Symbol
L3
L5
L6
Maximum DC Output Current (Tc= 85°C)
Maximum Voltage Drop @ Amps Peak
Operating Junction Temperature Range
Critical Rate of Rise of On-State Current @ TJ=125°C
Critical Rate of Rise of Off-State Voltage [V/
µsec]
I
D
V
F
15 A
25 A
42.5 A
2.2V @ 15A
1.6V @ 25A
-40 – 125°C
100A/
µsec
500V/
µsec
120 (400V
RRM
)
240 (400V
RRM
)
280 (400V
RRM
)
1.6V @ 42.5A
T
J
di/dt
dv/dt
AC Line Input Voltage (Repetitive Peak Reverse Voltage)
Maximum Non-Repetitive Surge Current (1/2 Cycle, 60 Hz) [A]
V
RMS
480 (400V
RRM
)
I
TSM
I² T
225
210
300
375
600
1500
Maximum
I² t for Fusing (t=8.3ms)[A² sec]
Maximum Required Gate Current to Trigger @ 25°C [mA]
Maximum Required Gate Voltage to Trigger @ 25°C [V]
Average Gate Power [W]
Maximum Peak Reverse Gate Voltage [V]
Maximum Thermal Resistance, Junction to Ceramic Base per Chip [°C/W]
Insolation Voltage [Vrms]
I
GT
V
GT
P
G(AV)
V
GM
R
JC
60
2.5
0.5
5.0
1.25°C/W
60
2.5
0.5
5.0
0.9°C/W
80
3.0
0.5
5.0
0.7°C/W
V
ISOL
2500
ELECTRICAL SPECIFICATIONS
Description
Weight (typical)
0.5 oz (14.4g)
MECHANICAL SPECIFICATIONS
Tolerances: ±±0±ꢀ ꢁn ꢂ ±0. ꢃꢃ
All dꢁꢃensꢁons are ꢁn: ꢁnches [ꢃꢁllꢁꢃeters]
1038
[3.0±]
±0.±
[1ꢀ07]
101ꢀ
[ꢀ804]
±078
[1908]
±0.±
[1ꢀ07]
0±.± TYP
[10ꢀ]
±0.±
[1ꢀ07]
±039
[908]
±0ꢀ.
[603]
CIRCUIT DIAGRAMS
AGENCY APPROVALS
Rev. 011718
ECN 20394
E72445
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO /
危险
HAZARD OF
ELECTRIC
SHOCK,
EXPLOSION,
OR ARC FLASH.
RIESGO DE
DESCARGA
ELECTRICA O
EXPLOSION.
RISQUE DE
GEFAHR EINES
ELEKTRISCHE
N SCHLAGES
ODER EINER
EXPLOSION.
RISCHIO DI
SCOSSA
ELETTRICA O
DELL’ESPLOSIONE.
存在电击、
爆炸或电弧
闪烁危险
DESCHARGE
ELECTRIQUE
OU EXPLOSION
•
在操作此设
备之前请先
关闭电源。
•
Eteindre
toutes les
sources
d’énergie de
cet appareil
avant de
travailler
dessus de cet
appareil
•
Spenga tutta
l’alimentazione
che fornisce
questa
apparecchiatura
prima di lavorare
a questa
•
Desconectar
todos los
suministros de
energia a este
equipo antes
de trabajar
•
Disconnect all
power before
installing or
working with
this equipment.
•
Stellen Sie
jeglichen
Strom ab, der
dieses Gerät
versorgt, bevor
Sie an dem
若不遵守这些说明，
可能会导致严重的
人身伤害甚至死亡。
con este equipo.
•
Verify all
connections
and replace all
covers before
turning on
Gerät Arbeiten
durchführen
apparecchiatura
•
Verificar todas
las conexiones
y colocar todas
las tapas antes
de energizer
•
Verificare tutti
i collegamenti
e sostituire
tutte le coperture
prima
•
Vor dem
Drehen auf
Energie alle
Anschlüsse
überprüfen
und alle
•
Vérifier tous
connections, et
remettre tous
couverts en
olace avant de
mettre sous
power.
el equipo.
Failure to follow
these
instructions will
result in death
or serious injury.
dell’accensione
El
Abdeckungen
ersetzen.
L’omissione di
queste istruzioni
provocherà la
morte o
incumplimiento
de estas
instrucciones
puede provocar
la muerte o
lesiones serias.
De non-suivi de
ces instructions
provoquera la
mort ou des
lésions sérieuses
sérieuses.
Unterlassung
dieser
Anweisungen
können zum
Tode oder zu
schweren
lesioni serie
Verletzungen
führen.
WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA /
警告
RISQUE DE DOMMAGE MATERIEL ET DE
SURCHAUFFE DU BOITIER
GEFAHR VON MATERIALSCHÄDEN UND
GEHÄUSEERHITZUNG
RISK OF MATERIAL DAMAGE AND HOT
ENCLOSURE
•
Les panneaux latéraux du produit peuvent être
chauds. Laisser le produit refroidir avant de le
toucher.
•
Respecter les consignes de montage, et
notamment les couples de serrage.
•
Ne pas laisser pénétrer de liquide ni de corps
étrangers à l’intérieur du produit.
•
Die Seitenwände können heiß sein. Lassen Sie
das Produkt abkühlen, bevor Sie es berühren.
•
Beachten Sie die Montageanweisungen,
•
Führen Sie keine Flüssigkeiten oder
•
The product’s side panels may be hot, allow
the product to cool before touching.
•
Follow proper mounting instructions including
torque values.
•
Do not allow liquids or foreign objects to enter
this product.
Fremdkörper in das Produkt ein.
Le non-respect de cette directive peut entraîner,
des lésions corporelles graves ou des
dommages matériels.
Die Nichtbeachtung dieser Anweisung kann
Körperverletzung oder Materialschäden
zur Folge haben.
Failure to follow these instructions can result in
serious injury, or equipment damage.
RIESGO DE DAÑOS MATERIALES Y DE
SOBRECALENTAMIENTO DE LA UNIDAD
材料损坏和高温外壳的危险性
RISCHIO DI DANNI MATERIALI E D’INVOLUCRO
CALDO
•
产品的一侧面板可能很热，在其冷却前请
不要触碰。
•
遵照正确的安装说明，包括扭矩值。
•
请勿让液体及其他异物进入本产品。
•
Los paneles laterales del producto pueden
estar calientes. Esperar que el producto se
enfríe antes de tocarlo.
•
Respetar las instrucciones de montaje, y en
particular los pares de apretado.
•
I pannelli laterali dell’apparecchio possono
scottare; lasciar quindi raffreddare il prodotto
prima di toccarlo.
•
Seguire le istruzioni di montaggio corrette.
•
Non far entrare liquidi o oggetti estranei in questo
apparecchio.
•
No dejar que penetren líquidos o cuerpos
extraños en el producto.
La mancata osservanza di questa precauzione può
causare gravi rischi per l’incolumità personale o
danni alle apparecchiature.
如不能正确执行这些操作说明，
极有可能造成严重人体伤害或者设备的损坏。
Si no se respetan estas precauciones pueden
producirse graves lesiones, daños materiales.
ANNEX – ENVIRONMENTAL INFORMATION
The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China
Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.
Part
Name
Toxic or hazardous Substance and Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr (VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Semiconductor die
Solder
附件 – 环保信息
此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 – 2006,
电子信息产品污染控制标识要求。
部件
名称
有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr (VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
半导体芯片
焊接点
50
Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely
intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products
(also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for
using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata
datasheets have been created using standard laboratory conditions and engineering practices. Sensata
has not conducted any testing other than that specifically described in the published documentation for a
particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its
datasheets or components without notice.
Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each
particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE
TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY
TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE
PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE
DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTOR
Y
,
I
NCLUDING ACCURACY
OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF
MERCHANTABILIT
Y
,
F
ITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND
NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA
DATASHEETS OR USE THEREO
F
.
CONTACT US
Regional head offices:
United States of America
Sensata Technologies
Attleboro, MA
Phone:
508-236-3800
Netherlands
Sensata Technologies Holland B.
V
.
Hengelo
Phone:
+31 74 357 8000
China
All products are sold subject to Sensata’
s terms and conditions of sale supplied at www.sensata.com.
SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’
PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE
WITH ALL LEGAL, REGULATOR
Y
,
A
ND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND
ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-
RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA.
Sensata Technologies China Co., Ltd.
Shanghai
Phone:
+8621 2306 1500
Copyright © 2023 Sensata Technologies, Inc.
Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA
