Skyworks-Solutions-SKY13414-485LF

DATA SHEET  

SKY13414-485LF: 0.1 to 3.8 GHz SP4T Antenna Switch  

Applications  



Any 2G/3G/4G antenna diversity or LTE (TDD/FDD)  

transmit/receive system for which GSM transmit is not required  

RF1  

Features  

RF2  



Broadband frequency range: 0.1 to 3.8 GHz  

ANT  

RF3  



Low insertion loss: 0.45 dB typical @ 2.7 GHz  



High isolation: >31 dB @ 2.7 GHz  

RF4  



Internal 50

Ω

port to control diversity antenna impedance when  

device is not in use  

50

Ω

 



Integrated logic  

Bia

s

Decoder  



Small QFN (14-pin, 2.0 x 2.0 mm) package  

(MSL1, 260



C per JEDEC J-STD-020)  

S

kywork

s G

reen™ product

s

are compliant with  

all applicable legi

s

lation and are halogen-free.  

For additional information, refer to

Skyworks  

Definition of Green™

, document number  

S

Q04-0074.  

Figure 1. SKY13414-485LF Block Diagram  

Description  

The SKY13414-485LF is a single pole, four-throw (SP4T) antenna  

switch with an internal 50

Ω

termination. The high-linearity  

performance and low insertion loss achieved by the  

SKY13414-485LF make it an ideal choice for main/diversity  

switching commonly used in LTE-based handsets, data cards,  

and tablets that use antenna diversity solutions.  

Switching is controlled by three CMOS/TTL-compatible control  

voltage inputs (V1, V2, and V3). Depending on the logic voltage  

level applied to the control pins, the ANT pin is connected to one  

of four switched RF outputs (RF1 to RF4) using a low insertion  

loss path, while the paths between the ANT pin and the other RF  

pins are in a high isolation state. The antenna path can also be  

closed on a 50

Ω

load when it needs to be terminated. The 50

Ω  

load is internally grounded. No external blocking capacitors are  

required on the RF paths unless VDC is externally applied.  

The SKY13414-485LF is part of a scalable family of products that  

covers SP4T through SP8T switches that allow up to eight bands  

of WCDMA/LTE:  

The SKY13414-485LF is manufactured in a compact, 14-pin  

2.0 x 2.0 mm, Quad Flat No-Lead (QFN) package.  



SKY13414-485LF SP4T Antenna Switch (this Data Sheet)  



SKY13415-485LF SP5T Antenna Switch (Data Sheet #201704)  



SKY13416-485LF SP6T Antenna Switch (Data Sheet #201679)  



SKY13417-485LF SP7T Antenna Switch (Data Sheet #201661)  



SKY13418-485LF SP8T Antenna Switch (Data Sheet #201712)  

A functional block diagram is shown in Figure 1. The pin  

configuration and package are shown in Figure 2. Signal pin  

assignments and functional pin descriptions are provided in  

Table 1.  

The symmetric port designs provide flexibility in signal routing for  

both receive diversity and higher power TD-SCDMA/TDD-LTE,  

WCDMA/FDD, and LTE transmit/receive applications.  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

201689J • Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• November

 

23, 2016  

1

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

14  

13  

12  

1

11  

10  

9

N/

C

 

RF3  

RF1  

VDD  

N/

C  

RF4  

RF2  

N/

C  

2

3

4

8

5

6

7

201

6

8

9

-002  

Figure 2. SKY13414-485LF Pinout  

(Top View)  

Table 1. SKY13414-485LF Signal Descriptions

1  

Pin  

1

Name  

Description  

Pin  

Name  

Description  

N/C  

RF3  

RF1  

VDD  

V3  

Not connected  

RF I/O path 3  

RF I/O path 1  

DC power supply  

8

N/C  

RF2  

RF4  

N/C  

N/C  

ANT  

N/C  

Not connected  

RF I/O path 2  

RF I/O path 4  

Not connected  

Not connected  

Antenna port  

Not connected  

2

9

3

10  

11  

12  

13  

14  

4

5

DC control voltage 3  

DC control voltage 2  

DC control voltage 1  

6

V2  

7

V1  

1

Bottom ground paddles must be connected to ground.  

Functional Description  

Electrical and Mechanical Specifications  

The SKY13414-485LF includes an internal negative voltage  

generator and decoder that eliminate the need for external DC  

blocking capacitors on the RF ports. No external components are  

required for proper operation. DC decoupling capacitors may be  

added on the VDD and control lines if necessary.  

The absolute maximum ratings of the SKY13414-485LF are  

provided in Table 2. Electrical specifications are provided in  

Table 3.  

The state of the SKY13414-485LF is determined by the logic  

shown in Table 4.  

Switching is controlled by three control voltage inputs, V1, V2, and  

V3. Depending on the logic voltage level applied to the control  

pins, the antenna pin is connected to one of four switched RF  

outputs or a 50

Ω

termination.  

The isolation matrix shown in Table 5 provides the port-to-port  

and antenna-to-port isolation for all available RF states at four  

different frequencies: 1.0 GHz, 2.0 GHz, 2.7 GHz, and 3.8 GHz.  

Shutdown mode is enabled by connecting all three control pins  

(V1, V2, and V3) to logic high. This mode reduces the overall  

current consumption of the device to 5

μ

A typical.  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

November 23, 2016

 

• Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• 201689J  

2

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Table 2. SKY13414-485LF Absolute Maximum Ratings

1  

Parameter  

Symbol  

Minimum  

2.5  

Maximum  

5.0  

Units  

Supply voltage  

V

DD  

V

CTL  

P

IN  

V

V

Control voltage (V1, V2, and V3)  

–0.5  

+3.0  

RF power applied to “on” arm (RF1 to RF4) or ANT port:  

0.1 to 2.7 GHz (RF1 to RF4 arm)  

3.4 to 3.8 GHz (RF2 to RF4 arm)  

+37.5  

+35  

dBm  

dBm  

RF power applied to “off” arm (RF1 to RF4)  

RF power applied to antenna in the 50

Ω

switched RF output state  

Operating temperature  

P

IN  

+33  

+27  

dBm  

dBm  



C  

P

IN  

T

OP  

T

STG  

ESD  

–40  

–55  

+85  

Storage temperature  

+150  



C  

Electrostatic discharge:  

Human Body Model (HBM)  

1

500  

V

Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters  

set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.  

ESD HANDLING

:

A

lthough this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.  

This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce  

potentials of several kilovolts on the human body or equipment, which can discharge without detection.  

Industry-standard ESD handling precautions should be used at all times.  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

201689J • Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• November

 

17, 2016  

3

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Table 3. SKY13414-485LF General Electrical Specifications

1  

(V

DD

= 2.6 V, V1 = V2 = V3 = 0/1.8 V, P

IN

= 0 dBm, T

OP

= +25



C, Characteristic Impedance [Z

O

] = 50

Ω

, Unless Otherwise Noted)  

Test Condition  

Parameter  

DC Specifications  

Symbol  

(Note 2)  

Min  

Typical  

Max  

Units  

Supply voltage  

Supply current  

V

DD  

2.5  

3.0  

40  

4.8  

50  

V

I

DD  

μ

A  

Control voltage:  

High  

Low  

V

CTL

_

H  

V

CTL

_

L  

1.35  

1.80  

2.70  

0.4  

V

V

Control current  

I

CTL  

I

OFF  

t

ON  

V

CTL

= 1.8 V  

0.5  

5

1.0  

10  

μ

A  

Shutdown mode supply current  

V1/2/3 = 1.8 V, V

DD

= 3 V  

μA  

50% of control voltage to  

90% of final RF power,  

switching between  

RF1/2/3/4/5/6  

Turn-on switching time  

1.75  

2.20  

μs  

RF Specifications  

IL  

0.1 to 1.0 GHz  

1.0 to 2.0 GHz  

2.0 to 2.7 GHz  

3.4 to 3.8 GHz  

0.40  

0.40  

0.45  

0.6  

0.50  

0.50  

0.60  

0.8  

dB  

dB  

dB  

dB  

Insertion loss (ANT pin to RF1/2/3/4 pins)  

Iso  

RL  

0.1 to 1.0 GHz  

1.0 to 2.0 GHz  

2.0 to 2.7 GHz  

3.4 to 3.8 GHz  

38  

32  

27  

20  

42  

35  

31  

26  

dB  

dB  

dB  

dB  

Isolation (ANT pin to RF1/2/3/4 pins)  

0.1 to 1.0 GHz  

1.0 to 2.0 GHz  

2.0 to 2.7 GHz  

3.4 to 3.8 GHz  

21  

23  

15  

12  

24  

25  

18  

15  

dB  

dB  

dB  

dB  

Input return loss (ANT pin to RF1/2/3/4 pins)  

2fo  

3fo  

P

IN

= +26 dBm,  

0.1 to 3.0 GHz  

Second harmonics (ANT pin to RF1/2/3/4 pins)  

Third harmonics (ANT pin to RF1/2/3/4 pins)  

Harmonics (ANT to RF2, 3, 4)  

+99  

+105  

–55  

dBc  

dBc  

P

IN

= +26 dBm,  

0.1 to 3.0 GHz  

P

IN

= +26 dBm,  

3.4 to 3.8 GHz, VSWR = 1:1  

2fo  

3fo  

2fo  

dBm  

dBm  

dBm  

dBm  

P

IN

= +26 dBm,  

3.4 to 3.8 GHz, VSWR = 1:1  

Harmonics (ANT to RF2, 3, 4)  

–65  

P

IN

= +26 dBm,  

3.4 to 3.8 GHz, VSWR = 5:1  

Harmonics (ANT to RF2, 3, 4)  

–50  

P

IN

= +26 dBm,  

3.4 to 3.8 GHz, VSWR = 5:1  

Harmonics (ANT to RF2, 3, 4)  

3fo  

–60  

0.1 dB compression point (ANT pin to RF2/3/4  

pins)  

P0.1dB  

0.8 GHz to 3.0 GHz  

3.4 to 3.8 GHz  

+37.5  

+37  

dBm  

dBm  

IIP3  

@ 2.0 GHz,  

Third order input intercept point  

P

IN

= +26 dBm,  

Δ

f = 1 MHz  

+70  

dBm  

dBm  

50

Ω

power handling  

@ 0.1 to 3.8 GHz  

+27  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

November 23, 2016

 

• Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• 201689J  

4

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Switched RF Outputs  

Table 4. SKY13414-485LF Control Logic

1  

Control Pins  

V1  

V2  

V3  

RF1  

RF2  

RF3  

RF4  

(Pin 7)  

(Pin 6)  

(Pin 5)  

(Pin 3)  

(Pin 9)  

(Pin 2)  

(Pin 10)  

50

Ω

 

Isolation  

0

0

0

0

1

1

1

0

0

1

1

0

0

1

0

1

0

1

0

1

1

Insertion Loss  

Isolation  

Isolation  

Isolation  

Isolation  

Insertion Loss  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

50

Ω  

Isolation  

Insertion Loss  

Isolation  

Isolation  

Isolation  

Isolation  

Insertion Loss  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

Isolation  

Shutdown mode  

1

“High” = 1.8 V; “Low” = 0 V. Any state other than that described in this table places the switch into an undefined state. An undefined state will not damage the device.  

Table 5. Isolation Matrix (1 of 2)  

Isolation  

(dB)  

Frequency  

(GHz)  

“On” Port  

RF1  

RF2  

RF3  

RF4  

Antenna-to-Port  

RF1  

RF1  

RF1  

RF1  

RF2  

RF2  

RF2  

RF2  

RF3  

RF3  

RF3  

RF3  

RF4  

RF4  

RF4  

RF4  

1.0  

2.0  

2.7  

3.8  

1.0  

2.0  

2.7  

3.8  

1.0  

2.0  

2.7  

3.8  

1.0  

2.0  

2.7  

3.8  

–

–47  

–39  

–36  

–31  

–

–40  

–31  

–27  

–22  

–40  

–34  

–31  

–26  

–

–42  

–35  

–32  

–27  

–40  

–32  

–28  

–23  

–42  

–35  

–32  

–27  

–

–

–

–

–46  

–38  

–35  

–30  

–38  

–30  

–27  

–23  

–45  

–38  

–34  

–30  

–

–

–

–46  

–39  

–36  

–31  

–38  

–31  

–28  

–24  

–

–

–

–41  

–34  

–31  

–26  

–

–

–

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

201689J • Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• November

 

17, 2016  

5

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Table 5. Isolation Matrix (2 of 2)  

Isolation  

(dB)  

Frequency  

“On” Port  

Port-to-Port  

(GHz)  

RF1  

RF2  

RF3  

RF4  

RF1  

RF1  

RF1  

RF1  

RF2  

RF2  

RF2  

RF2  

RF3  

RF3  

RF3  

RF3  

RF4  

RF4  

RF4  

RF4  

1.0  

2.0  

2.7  

3.8  

1.0  

2.0  

2.7  

3.8  

1.0  

2.0  

2.7  

3.8  

1.0  

2.0  

2.7  

3.8  

–

–54  

–43  

–39  

–32  

–

–31  

–25  

–22  

–17  

–48  

–41  

–37  

–33  

–

–52  

–43  

–39  

–34  

–31  

–24  

–21  

–17  

–52  

–43  

–39  

–34  

–

–

–

–

–55  

–43  

–38  

–32  

–30  

–24  

–21  

–17  

–56  

–44  

–39  

–32  

–

–

–

–56  

–45  

–40  

–34  

–30  

–24  

–21  

–17  

–

–

–

–48  

–41  

–37  

–32  

–

–

–

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

November 23, 2016

 

• Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• 201689J  

6

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Evaluation Board Description  

Package and Handling Information  

The SKY13414-485LF Evaluation Board is used to test the  

performance of the SKY13414-485LF SP4T switch. An Evaluation  

Board schematic diagram is provided in Figure 3. An assembly  

drawing for the Evaluation Board is shown in Figure 4.  

Instructions on the shipping container label regarding exposure to  

moisture after the container seal is broken must be followed.  

Otherwise, problems related to moisture absorption may occur  

when the part is subjected to high temperature during solder  

assembly.  

The SKY13414-485LF is rated to Moisture Sensitivity Level 1  

(MSL1) at 260



C. It can be used for lead or lead-free soldering.  

For additional information, refer to the Skyworks Application Note,  

Solder Reflow Information

, document number 200164.  

Package Dimensions  

The PCB layout footprint for the SKY13414-485LF is provided in  

Figure 5. Typical part markings are shown in Figure 6. Package  

dimensions are shown in Figure 7, and tape and reel dimensions  

are provided in Figure 8.  

Care must be taken when attaching this product, whether it is  

done manually or in a production solder reflow environment.  

Production quantities of this product are shipped in a standard  

tape and reel format.  

Antenna  

×

×

14  

13  

12  

1

11  

10  

9

N/

C

 

RF4  

RF2  

N/

C  

×

N/

C  

RF3  

RF1  

VDD  

×

×

2

3

4

RF Output  

Port 3  

RF Output  

Port 4  

RF Output  

Port 1  

RF Output  

Port 2  

8

D

C

Power  

5

6

7

D

C C

ontrol  

Voltage 3  

D

C C

ontrol  

Voltage 1  

D

C C

ontrol  

Voltage 2  

201

6

8

9

-003  

Figure 3. SKY13414-485LF Evaluation Board Schematic  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

201689J • Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• November

 

17, 2016  

7

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

RF3  

RF1  

N/

C

 

N/

C  

G

ND  

VDD  

V3  

V2  

ANT  

V1  

N/

C  

N/

C  

RF2  

RF4  

N/

C  

201

6

8

9

-004  

Figure 4. SKY13414-485LF Evaluation Board Assembly Diagram  

14X 0.755  

Pin 14  

14X 0.3

9

5  

R0.125  

Pin 1 Indicator  

Pin 1  

14X 0.200  

6

X 0.450 Pitch  

2X 0.500  

Expo

s

ed

S

oldering  

Area  

Package Outline  

4X 0.400 Pitch  

201

6

8

9

-005  

2X 0.500  

All measurements in millimeters  

Figure 5. SKY13414-485LF PCB Layout Footprint  

(Top View)  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

November 23, 2016

 

• Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• 201689J  

8

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Pin 1  

Indicator  

S

kywork

s  

Part Number  

201

6

8

9

-00

6  

Figure 6. Typical Part Markings  

(Top View)  

–

C

–  

(0.500)  

12  

8X 0.845  

14  

–A–  

2.00  

R0.125  

Pin 1 Indicator  

S

ee Detail A  

0.02 +0.03/–0.02  

–B–  

Pin 1  

Indicator  

1

4

11  

6

X 0.845  

4X 0.225  

(0.500)  

2.00  

1

0.1  

4X 0.

6

75  

8

0.05  

C

7

5

2X  

0.120 Ref.  

14X  

Expo

s

ed Pad  

14X 0.0

6

5  

0.55 0.05  

0.05  

3

C

0.05  

C

4X 0.400  

2X  

C

0.05  

14X 0.255  

1

0.1  

Top View  

S

ide View  

Bottom View  

0.2 0.05  

0.18 0.05  

Notes:  

1. All measurements are in millimeters.  

4

0.10 M

C

A B  

Detail A  

S

cale: 100X  

3X Thi

s

Rotation  

3X Rotated 180°  

4X Rotated

9

0°

C

W  

4X Rotated

9

0°

CC

W  

2. Dimensions and tolerances according to ASME Y14.5M-1994.  

3. Coplanarity applies to the terminals and all other bottom surface metallization.  

4. Dimension applies to metallized terminal. If the terminal has a radius on its end,  

the width dimension should not be measured in that radius area.  

201

6

8

9

-007  

Figure 7. SKY13414-485LF Package Dimensions  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

201689J • Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• November

 

17, 2016  

9

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

2.00 0.05  

Ø

1.50 + 0.10/–0.00  

Pin 1  

4.00 0.10  

0.23 0.05  

1.75 0.10  

3.50 0.05  

A

2.25 0.05  

7º  

8.00

0.20  

A

B

B

4.00 0.10  

0.70 0.05

 

(Ko)  

7º  

Section A  

2.25 0.05  

Section B  

Notes:  

1. Carrier

 

tape must meet all requirements of Skyworks GP01-D232 procurement spec for tape and reel shipping.  

2. Carrier

 

tape shall be black conductive polycarbonate bakeable material at 125 ˚C temperature.  

3. Cover

 

tape shall be transparent conductive with 5.40 mm width.  

4. ESD-surface

 

resistivity must meet all ESD requirements of Skyworks specified on GP01-D232.  

5. All

 

measurements are in millimeters.  

201

6

8

9

-008  

Figure 8. SKY13414-485LF Tape and Reel Dimensions  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

November 23, 2016

 

• Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• 201689J  

10  

DATA SHEET

 

• SKY13414-485LF:

 

SP4T ANTENNA SWITCH  

Ordering Information  

Model Name  

Manufacturing Part Number  

SKY13414-485LF  

Evaluation Board Part Number  

SKY13414-485LF-EVB  

SKY13414-485LF: 0.1 to 3.8 GHz SP4T Antenna Switch  

Copyright © 2011-2016 Skyworks Solutions, Inc. All Rights Reserved.  

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by  

Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the  

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to  

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.  

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or  

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions  

of Sale.  

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A  

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY  

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS  

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,  

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE  

POSSIBILITY OF SUCH DAMAGE.  

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,  

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any  

damages resulting from such improper use or sale.  

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of  

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for  

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.  

Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for  

reference.  

Skyworks Solutions, Inc.

 

• Phone

 

[781] 376-3000

 

• Fax

 

[781] 376-3100

 

201689J • Skyworks

 

Proprietary Information

 

• Products

 

and Product Information are Subject to Change Without Notice

 

• November

 

17, 2016  

11