STMicroelectronics-BTA10-600CRG
| Part # | STMicroelectronics-BTA10-600CRG |
Download  | STMicroelectronics-BTA10-600CRG |
BTA10, BTB10, T10xx
10 A Snubberless
TM
, logic level and standard Triacs
Datasheet – production data
Description
Available either in through-hole or surface mount
packages, the BTA10, BTB10 and T10xx Triac
series are suitable for general purpose mains
power AC switching. They can be used as
ON/OFF function in applications such as static
relays, heating regulation or induction motor
starting circuit. They are also recommended for
phase control operations in light dimmers and
appliance motors speed controllers.
The Snubberless™ versions (W suffi
x and T10xx)
are especially recommended for use on inductive
loads, because of their high commutation
performance. By using an internal ceramic pad,
the Snubberless™ series provide an insulated
tab (rated at 2500 V
RMS
) complying with UL
standards (file reference: E81734).
Table 1: Device summary
BTA10, BTB10,
Symbol
I
T(RMS)
Parameter
T10xx
RMS on-state current
10 A
Repetitive peak off-
state voltage
V
DRM
/V
RRM
I
GT
600 and 800 V
25 to 50 mA
Features
Triggering gate current
Medium current triac
Low thermal resistance with clip bonding
Low thermal resistance insulation ceramic
for insulated BTA
High commutation (4Q) or very high
commutation (3Q,
S
nubberless™) capability
BTA series UL1557 certified (file ref: 81734)
Packages are RoHS (2002/95/EC) compliant
February 2017
DocID2937 Rev 7
1/14
This is information on a product in full production.
Characteristics
BTA10, BTB10, T10xx
1
Characteristics
Table 2: Absolute maximum ratings
Parameter
Symbol
Value
Unit
TO-220AB
T
c
= 105 °C
T
c
= 95 °C
t
p
= 20 ms
RMS on-state current (full sine
wave)
I
T(RMS)
10
A
TO-220AB Ins.
F = 50 Hz
Non repetitive surge peak on-
state current (full cycle, T
j
initial
= 25 °C)
100
105
55
I
TSM
I
2
t
A
F = 60 Hz
t
p
= 10 ms
t
p
= 16.7 ms
I
2
t value for fusing
A
2
s
A/µs
Critical rate of rise of on-state
current
dl/dt
F = 120 Hz
T
j
= 125 °C
T
j
= 25 °C
50
I
G
= 2 x I
GT
, t
r
≤ 100 ns
Non repetitive surge peak off-
state voltage
V
DRM
/V
RRM
+ 100
V
DSM
/V
RSM
t
p
= 10 ms
t
p
= 20 µs
V
I
GM
P
G(AV)
T
stg
Peak gate current
T
j
= 125 °C
T
j
= 125 °C
4
A
Average gate power dissipation
1
W
°C
°C
Storage junction temperature range
Operating junction temperature range
-40 to +150
-40 to +125
T
j
Table 3: Static electrical characteristics
Symbol
Test Conditions
I
TM
= 14 A, t
p
= 380 µs
T
j
Value
1.55
Unit
V
25 °C
125 °C
Max.
Max.
Max.
threshold on-state voltage
Dynamic resistance
V
TO
R
D
0.85
V
125 °C
25 °C
40
5
mΩ
µA
V
DRM
= V
RRM
I
DRM
/I
RRM
Max.
125 °C
1
mA
Notes:
(1)
For both polarities of A2 referenced to A1
2/14
DocID2937 Rev 7
BTA10, BTB10, T10xx
Characteristics
Table 4: Electrical characteristics (T
j
= 25 °C, unless otherwise specified) –
Snubberless™
(3 quadrants)
BTA10/BTB10
Symbol
Parameter
Quadrant
T1050 Unit
CW
BW
I – II – III
I – II – III
Max.
Max.
35
50
mA
V
V
D
= 12 V, R
L
= 33 Ω
V
GT
V
GD
1.3
0.2
V
D
= V
DRM
, R
L
= 3,3 kΩ,
T
j
= 125 °C
I – II – III
Min.
V
I
T
= 500 mA
Max.
Max.
Max.
35
50
60
50
70
80
mA
I – III
II
I
L
I
G
= 1.2 I
GT
mA
V
D
= 67 % V
DRM
gate open,
T
j
= 125 °C
Min.
Min.
500
5.5
1000
9
V/µs
A/ms
Notes:
(1)
Minimum I
GT
is guaranteed at 5 % of I
GT
max.
(2)
For both polarities of A2 referenced to A1
Table 5: Electrical characteristics (T
j
= 25 °C, unless otherwise specified) – standard Triac
(4 quadrants)
Value
Symbol
Parameter
Quadrant
Unit
C
B
I – II – III
IV
Max.
Max.
Max.
Min.
Max.
Max.
Max.
Min.
Min.
25
50
50
mA
V
D
= 12 V, R
L
= 33 Ω
100
V
GT
V
GD
All
1.3
0.2
V
V
V
D
= V
DRM
, R
L
= 3,3 kΩ, T
j
= 125 °C
I – II – III
I
T
= 500 mA
25
40
80
50
50
mA
I – III
II
I
L
I
G
= 1.2 I
GT
mA
100
V
D
= 67 % V
DRM
gate open, T
j
= 125 °C
200 400
10
V/µs
V/µs
5
Notes:
(1)
Minimum I
GT
is guaranteed at 5 % of I
GT
max.
(2)
For both polarities of A2 referenced to A1
DocID2937 Rev 7
3/14
Characteristics
BTA10, BTB10, T10xx
Table 6: Thermal resistance
Parameter
Symbol
Value
Unit
1.5
2.4
45
TO-220AB / D²PAK
R
th(j-c)
(typ.)
Junction to case (AC)
TO-220AB insulated
D²PAK
°C/W
Junction to ambient
R
th(j-a)
(max.)
TO-220AB / TO-220AB ins
60
Notes:
(1)
Copper surface under tab.
4/14
DocID2937 Rev 7
BTA10, BTB10, T10xx
Characteristics
1.1
Characteristics (curves)
Figure 1: Maximum power dissipation versus
on-state RMS current (full cycle)
Figure 2: RMS on-state current versus case
temperature (full cycle)
Figure 3: Relative variation of thermal impedance
versus pulse duration
Figure 4: On-state characteristics
(maximum values)
Figure 5: Surge peak on-state current versus
number of cycles
Figure 6: Non repetitive surge peak on-state
current versus sinusoidal pulse width (t
P
< 10 ms)
DocID2937 Rev 7
5/14
Characteristics
BTA10, BTB10, T10xx
Figure 7: Relative variation of gate trigger current,
Figure 8: Relative variation of critical rate of
decrease of main current versus
(dV/dt)c (typical values)
holding current and latching current versus
junction temperature (typical values)
Figure 9: Relative variation of critical rate of
decrease of main current versus junction
temperature
Figure 10: D2PAK thermal resistance junction to
ambient versus copper surface under tab
R
th(j-a)
(°C/W)
80
(dl/dt)c [T ] / (dl/dt)c [T
j
]
j = 125 °C
70
60
50
40
30
20
6
5
4
3
2
Epoxy printed board FR4, e
= 35 µm
CU
10
1
S
Cu
(cm²)
0
T (°C)
j
0
0
5
10
15
20
25
30
35
40
0
25
50
75
100
125
6/14
DocID2937 Rev 7
BTA10, BTB10, T10xx
Package
information
2
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
ECOPACK
®
is an ST trademark.
Epoxy meets UL 94,V0
Lead-free package
2.1
D²PAK package information
Figure 11: D²PAK package outline
DocID2937 Rev 7
7/14
Package
information
BTA10, BTB10, T10xx
Table 7: D²PAK package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Min.
4.30
2.49
0.03
0.70
1.25
0.45
1.21
8.95
7.50
1.30
10.00
8.30
6.85
4.88
15
Typ.
Max.
4.60
2.69
0.23
0.93
Min.
Max.
A
A1
A2
B
0.1693
0.0980
0.0012
0.0276
0.0492
0.0177
0.0476
0.3524
0.2953
0.0512
0.3937
0.3268
0.2697
0.1921
0.5906
0.0500
0.0551
0.1811
0.1059
0.0091
0.0366
B2
C
1.40
0.0551
0.60
1.36
9.35
8.00
1.70
10.28
8.70
7.25
5.28
15.85
1.40
1.75
0.0236
0.0535
0.3681
0.3150
0.0669
0.4047
0.3425
0.2854
0.2079
0.6240
0.0551
0.0689
C2
D
D1
D2
E
E1
E2
G
L
L2
L3
R
1.27
1.40
0.0157
0.40
V2
0°
8°
0°
8°
Notes:
(1)
Dimensions in inches are given for reference only
Figure 12: D²PAK recommended footprint (dimensions are in mm)
8/14
DocID2937 Rev 7
BTA10, BTB10, T10xx
Package
information
2.2
TO-220AB (NIns. and Ins.) package information
Figure 13: TO-220AB (NIns. & Ins.) package outline
DocID2937 Rev 7
9/14
Package
information
BTA10, BTB10, T10xx
Table 8: TO-220AB (NIns. & Ins.) package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Typ.
Min.
Max.
Min.
Max.
A
a1
a2
B
15.20
15.90
0.5984
0.6260
3.75
0.1476
13.00
10.00
0.61
1.23
4.40
0.49
2.40
2.40
6.20
3.73
2.65
1.14
1.14
15.80
14.00
10.40
0.88
1.32
4.60
0.70
2.72
2.70
6.60
3.88
2.95
1.70
1.70
16.80
0.5118
0.3937
0.0240
0.0484
0.1732
0.0193
0.0945
0.0945
0.2441
0.1469
0.1043
0.0449
0.0449
0.6220
0.5512
0.4094
0.0346
0.0520
0.1811
0.0276
0.1071
0.1063
0.2598
0.1528
0.1161
0.0669
0.0669
0.6614
b1
b2
C
c1
c2
e
F
I
L
I2
I3
I4
16.40
2.6
0.6457
0.1024
M
Notes:
(1)
Inch dimensions are for reference only.
10/14
DocID2937 Rev 7
BTA10, BTB10, T10xx
Ordering
information
3
Ordering information
Figure 14: BTA10 and BTB10 series ordering information scheme
BT
A
10 –
600 BW
RG
Triac
Insulation
A = Insulated
B = Non-insulated
Current
10 = 10 A
Voltage
60
0
=
6
00 V
80
0
=
8
00 V
Sensitivity and type
B = 50 mA standard
C = 25 mA standard
SW = 10 mA logic level
Packing mode
BW = 50 mA Snubberless
™
CW = 35 mA Snubberless
™
RG = Tube
Figure 15: T10xx series ordering information scheme
T
10 50
–
8
G –
TR
Triac
Current
10 = 10 A
Sensitivity
50 =mA
Voltage
800 V
Package
G = D²PAK
Packing mode
( blank) = Tube
-TR = Tape and reel
DocID2937 Rev 7
11/14
Ordering
information
BTA10, BTB10, T10xx
Table 9: Ordering information
Base
qty.
Delivery
mode
Order code
Marking
Package
Weight
BTA10-600BRG
BTA10-600CRG
BTA10-600BWRG
BTA10-600CWRG
BTA10-800BWRG
BTA10-800CWRG
BTB10-600BWRG
BTB10-800BWRG
T1050-8G
BTA10-600B
BTA10-600C
BTA10-600BW
BTA10-600CW
BTA10-800BW
BTA10-600CW
BTB10-600BW
BTB10-800BW
T1050-8G
TO-220AB Ins.
2.3 g
50
Tube
TO-220AB
D²PAK
1.38 g
Tape and reel
13″Tube
T1050-8G-TR
T1050-8G
1000
12/14
DocID2937 Rev 7
BTA10, BTB10, T10xx
Revision
history
4
Revision history
Table 10: Document revision history
Date
Revision
Changes
Sep-2002
5A
Last update.
TO-220AB delivery mode changed from bulk to tube. ECOPACK
statement added.
13-Feb-2006
06-Feb-2017
6
7
Added D²PAK package information.
DocID2937 Rev 7
13/14
BTA10, BTB10, T10xx
IMPORTANT NOTICE
–
PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modification
s
, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of or
der
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics
–
All rights reserved
14/14
DocID2937 Rev 7
