STMicroelectronics-BTB10-800BWRG
| Part # | STMicroelectronics-BTB10-800BWRG |
Download  | STMicroelectronics-BTB10-800BWRG |
BTA10, BTB10
T1035, T1050
Datasheet
10 A Snubberless™, logic level and standard Triacs
A2
A1
Features
•
•
•
•
Medium current Triac
Low thermal resistance with clip bonding
Low thermal resistance insulation ceramic for insulated BTA
G
High commutation (4Q) or very high commutation (3Q, Snubberless™)
capability
A2
•
•
BTA series UL1557 certified (file ref: 81734)
Packages are RoHS (2002/95/EC) compliant
G
G
A2
A2
A1
A1
TO-220AB
TO-220AB Ins.
Description
A2
Available either in through-hole or surface mount packages, the BTA10, BTB10 and
T10xx Triac series are suitable for general purpose mains power AC switching. They
can be used as ON/OFF function in applications such as static relays, heating
regulation or induction motor starting circuit. They are also recommended for phase
control operations in light dimmers and appliance motors speed controllers.
G
A2
A1
D²PAK
The Snubberless™ versions (W suffix and T10xx) are especially recommended for
use on inductive loads, because of their high commutation performance. By using an
internal ceramic pad, the Snubberless™ series provide an insulated tab (rated at
2500 V
RMS
) complying with UL standards (file reference: E81734).
Product status link
Product summary
I
10 A
T(RMS)
V
/V
600 and 800 V
25 to 50 mA
DRM RRM
I
GT
DS3165
–
Rev 9
–
March 2019
For further information contact your local STMicroelectronics sales office.
BTA10, BTB10, T1035, T1050
Characteristics
1
Characteristics
Table 1.
Absolute maximum ratings
Symbol
Parameters
Value
Unit
T =
105 °C
TO-220AB
TO-220AB Ins.
F = 50 Hz
c
I
RMS on-state current (full sine wave)
10
A
T(RMS)
T =
95 °C
c
t =
20 ms
p
100
105
55
Non repetitive surge peak on-state current (full cycle, T
initial = 25 °C)
j
I
A
TSM
t =
16.7 ms
p
F = 60 Hz
2
2
2
t =
10 ms
p
I t
I t
value for fusing
A s
Critical rate of rise of on-state current
T =
125 °C
dl/dt
/V
F = 120 Hz
50
A/µs
V
j
I
= 2 x I
, t
≤ 100 ns
GT r
G
V
/V
+
DRM RRM
V
t =
10 ms
p
T =
25 °C
j
Non repetitive surge peak off-state voltage
DSM RSM
100
I
t =
20 µs
p
T =
125 °C
j
Peak gate current
4
A
GM
P
T =
125 °C
j
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
1
W
°C
°C
G(AV)
T
-40 to +150
-40 to +125
stg
T
j
Table 2.
Static electrical characteristics
T
Symbol
Test conditions
= 14 A, t
= 380 µs
Value
Unit
j
I
V
25 °C
Max.
Max.
Max.
1.55
V
TM
p
T
V
threshold on-state voltage
Dynamic resistance
125 °C
125 °C
25 °C
0.85
40
5
V
TO
R
D
mΩ
µA
mA
I
/I
V
= V
DRM RRM
Max.
DRM RRM
125 °C
1
1. For
both polarities of A2 referenced to A1
Table 3.
Electrical characteristics (T
j
= 25 °C, unless otherwise specified) – Snubberless™ (3 quadrants)
T1050
BTA10-xCW
Symbol
Parameters
Quadrant
T1035
BTA10-xBW Unit
BTB10-xBW
BTB10-xCW
I
I – II – III
Max.
I – II – III
Max.
35
50
mA
V
GT
V
V
= 12 V, R
= 33 Ω
D
L
V
1.3
0.2
GT
V
= V
, R
= 3,3 kΩ, T
= 125 °C
I – II – III
Min.
V
GD
D
DRM
L
j
I
I =
500 mA
T
I – II – III
Max.
35
50
50
70
mA
H
I – III
II
Max.
Max.
Min.
I
I =
1.2 I
G GT
mA
L
80
60
80
V
= 67 % V
gate open, T
= 125 °C
500
1000
V/µs
D
DRM
j
DS3165
–
Rev 9
page 2/12
BTA10, BTB10, T1035, T1050
Characteristics
T1050
BTA10-xCW
Symbol
Parameters
Quadrant
T1035
BTA10-xBW Unit
BTB10-xBW
BTB10-xCW
Without snubber, T
= 125 °C
Min.
5.5
9
A/ms
j
1. Minimum
I is
guaranteed at 5 % of I
max.
GT
GT
2. For
both polarities of A2 referenced to A1
Table 4.
Electrical characteristics (T
j
= 25 °C, unless otherwise specified) – standard Triac (4 quadrants)
Value
Symbol
Parameters
Quadrant
Unit
C
B
I – II – III
IV
Max.
Max.
Max.
Min.
25
50
50
I
mA
GT
V
V
= 12
V
, R
=
3
3 Ω
100
D
L
V
All
1.3
0.2
V
V
GT
V
= V
, R
= 3,3 kΩ, T
= 125 °C
I – II – III
GD
D
DRM
L
j
I =
500 mA
I
I – II – III
I – III
II
Max.
Max.
Max.
Min.
Min.
25
40
80
200
5
50
50
mA
T
H
I
I =
1.2 I
G GT
mA
L
100
400
10
V
= 67 % V
gate open, T
= 125 °C
V/µs
V/µs
D
DRM
j
(dI/dt)c = 4.4 A/ms, T
= 125 °C
j
1. Minimum
I is
guaranteed at 5 % of I
max.
GT
GT
2. For
both polarities of A2 referenced to A1
Table 5.
Thermal resistance
Symbol
Parameters
Value
1.5
2.4
45
Unit
TO-220AB / D²PAK
R
(typ.)
Junction to case (AC)
th(j-c)
TO-220AB insulated
D²PAK
°C/W
Junction to ambient
R
(max.)
th(j-a)
TO-220AB / TO-220AB ins
60
1. Copper
surface under tab.
DS3165
–
Rev 9
page 3/12
BTA10, BTB10, T1035, T1050
Characteristics (curves)
1.1
Characteristics (curves)
Figure 2.
Maximum power dissipation versus on-state
RMS current (full cycle)
Figure 3.
RMS on-state current versus case temperature
(full cycle)
(A)
I
T(RMS)
P(W)
13
12
12
11
BTB/T10
11
10
9
10
9
8
7
6
5
4
3
2
1
0
BTA
8
7
6
5
4
3
2
1
T
(°C)
c
I
(A)
T
(RMS)
0
10
6
7
8
9
0
1
2
3
4
5
0
2
5
50
75
100
125
Figure 4.
Relative variation of thermal impedance versus
pulse duration
Figure 5.
On-state characteristics (maximum values)
I
(A)
TM
K = [Z
/R
]
100
th th
T =
T max.
j
j
T max.
j
1E+0
Z
V
R
= 0.85 V
th(j-c)
to
= 40 mΩ
d
Z
th(j-a)
10
T =
25 °C
j
1E-1
V
(V)
TM
1
t
(s)
p
1E-2
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1E-3
1E-2
1E-1
1E+0
1E+1
1E+2
5E+2
Figure 6.
Surge peak on-state current versus number of
cycles
Figure 7.
Non repetitive surge peak on-state current
versus sinusoidal pulse width (t
P
< 10 ms)
I
(A)
TSM
I
(A)
TSM
1000
110
100
90
80
70
60
50
40
30
20
10
0
T
j
initial=25°C
t=20ms
I
TSM
Non repetitive
T
j
initial=25°C
dI/dt limitation:
50A/µs
One cycle
100
Repetitive
T
C
=95°C
Number of cycles
100
t (ms)
p
10
0.01
1
10
1000
0.10
1.00
10.00
DS3165
–
Rev 9
page 4/12
BTA10, BTB10, T1035, T1050
Characteristics (curves)
Figure 8.
Relative variation of gate trigger current, holding
current and latching current versus junction temperature
(typical values)
Figure 9.
Relative variation of critical rate of decrease of
main current versus (dV/dt)c (typical values)
(dl/dt)c [(dV/dt)c / specified (dl/dt)c
2.0
I
,I ,I [T
] / I
,I ,I [T =
25 °C]
GT
H
L
j
GT
H
L
j
2.5
2.0
1.5
1.0
0.5
0.0
1.8
C
1.6
B
I
GT
1.4
1.2
BW/CW/T10xx
1.0
0.8
I
H
and I
L
0.6
(dV/dt)c (V/µs)
10.0
T (°C)
j
0.4
0.1
1.0
100.0
-40
-20
0
20
40
60
80
100
120
140
Figure 10.
Relative variation of critical rate of decrease of
main current versus junction temperature
Figure 11.
D²PAK thermal resistance junction to ambient
versus copper surface under tab
R
th(j-a)
(°C/W)
80
(dl/dt)c [T ] / (dl/dt)c [T
j
]
j = 125 °C
D²PAK
6
5
4
3
2
70
Epoxy printed board FR4, copper thickness = 35 µm
60
50
40
30
20
1
10
S
Cu
(cm²)
T (°C)
j
0
0
0
25
50
75
100
125
0
5
10
15
20
25
30
35
40
DS3165
–
Rev 9
page 5/12
BTA10, BTB10, T1035, T1050
Package information
2
Package information
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions
2.1
D²PAK package information
Figure 12.
D²PAK package outline
A
E
E1
E2
c2
1
2
3
b2
e
Max resin gate protrusion: 0.5 mm (1)
b
G
A1
A2
A3
R
Gauge Plane
(1) Resin gate is accepted in each of position shown on the drawing, or their symmetrical.
Table 6.
D²PAK package mechanical data
Dimensions
Typ.
Ref.
Millimeters
Typ.
Min.
4.30
2.49
0.03
Max.
4.60
2.69
0.23
Min.
Max.
A
0.1693
0.0980
0.0012
0.1811
0.1059
0.0091
A1
A2
A3
b
0.25
0.0098
0.70
1.25
0.93
1.7
0.0276
0.0492
0.0366
0.0669
b2
DS3165
–
Rev 9
page 6/12
BTA10, BTB10, T1035, T1050
D²PAK package information
Dimensions
Ref.
Millimeters
Typ.
Min.
0.45
1.21
8.95
7.50
1.30
2.54
10.00
8.30
6.85
4.88
15
Max.
0.60
1.36
9.35
8.00
1.70
Min.
Typ.
Max.
c
c2
D
0.0177
0.0476
0.3524
0.2953
0.0512
0.1
0.0236
0.0535
0.3681
0.3150
0.0669
D1
D2
e
E
10.28
8.70
7.25
5.28
15.85
2.28
1.40
1.75
0.3937
0.3268
0.2697
0.1921
0.5906
0.0701
0.0500
0.0551
0.4047
0.3425
0.2854
0.2079
0.6240
0.0898
0.0551
0.0689
E1
E2
G
H
L
1.78
1.27
1.40
L2
L3
R
0.40
0.0157
V2
0°
8°
0°
8°
1. Dimensions
in inches are given for reference only
Figure 13.
D²PAK recommended footprint (dimensions are in mm)
16.90
10.30
5.08
1.30
3.70
8.90
DS3165
–
Rev 9
page 7/12
BTA10, BTB10, T1035, T1050
TO-220AB non ins. and insulated package information
2.2
TO-220AB non ins. and insulated package information
Figure 14.
TO-220AB non ins. and insulated package outline
C
B
b2
I
Resin gate 0.5 mm
max. protusion
(1)
L
F
A
I4
l3
l2
c2
a1
a2
M
c1
Resin gate 0.5 mm
max. protusion
(1)
b1
e
(1)Resin gate position accepted in one of the two positions or in the symmetrical opposites.
Table 7.
TO-220AB non ins. and insulated package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches1
Typ.
Min.
Max.
Min.
Max.
A
a1
a2
B
15.20
15.90
0.5984
0.6260
3.75
0.1476
13.00
10.00
0.61
14.00
10.40
0.88
0.5118
0.3937
0.0240
0.0484
0.1732
0.5512
0.4094
0.0346
0.0520
0.1811
b1
b2
C
1.23
1.32
4.40
4.60
DS3165
–
Rev 9
page 8/12
BTA10, BTB10, T1035, T1050
TO-220AB non ins. and insulated package information
Dimensions
Ref.
Millimeters
Typ.
Inches1
Typ.
Min.
0.49
2.40
2.40
6.20
3.73
2.65
1.14
1.14
15.80
Max.
0.70
2.72
2.70
6.60
3.88
2.95
1.70
1.70
16.80
Min.
Max.
c1
c2
e
0.0193
0.0945
0.0945
0.2441
0.1469
0.1043
0.0449
0.0449
0.6220
0.0276
0.1071
0.1063
0.2598
0.1528
0.1161
0.0669
0.0669
0.6614
F
I
L
I2
I3
I4
M
16.40
2.6
0.6457
0.1024
1. Inch
dimensions are for reference only.
DS3165
–
Rev 9
page 9/12
BTA10, BTB10, T1035, T1050
Ordering information
3
Ordering information
Figure 15.
BTA10 and BTB10 series ordering information scheme
BT
A
10 –
600 BW
RG
Triac
Insulation
A = Insulated
B = Non-insulated
Current
10 = 10 A
Voltage
60
0
=
6
00 V
80
0
=
8
00 V
Sensitivity and type
B = 50 mA standard
C = 25 mA standard
BW = 50 mA Snubberless™
CW = 35 mA Snubberless™
Packing mode
RG = Tube
Figure 16.
T10xx series ordering information scheme
T
10 50
–
8
G
– TR
Triac
Current
10 = 10 A
Sensitivity
50 = 50 mA
35 = 35 mA
Voltage
800 V
600 V
Package
G = D²PAK
Packing mode
(blank) = Tube
-TR =
T
a
pe and reel
Table 8.
Ordering information
Order code
BTA10-600BRG
BTA10-600CRG
BTA10-600BWRG
BTA10-600CWRG
BTA10-800BWRG
BTA10-800CWRG
BTB10-600BWRG
BTB10-800BWRG
T1035-6G
Marking
BTA10-600B
BTA10-600C
BTA10-600BW
BTA10-600CW
BTA10-800BW
BTA10-800CW
BTB10-600BW
BTB10-800BW
T1035-6G
Package
Weight
Base qty.
Delivery mode
TO-220AB Ins.
2.3 g
50
Tube
TO-220AB
D²PAK
T1050-8G
T1050-8G
1.50 g
T1035-6G-TR
T1035-6G
1000
T
a
pe and reel 13″
T1050-8G-TR
T1050-8G
DS3165
–
Rev 9
page 10/12
BTA10, BTB10, T1035, T1050
Revision history
Table 9.
Document revision history
Date
Revision
Changes
Sep-2002
5A
Last update.
TO-220AB delivery mode changed from bulk to tube. ECOPACK statement
added.
13-Feb-2006
06-Feb-2017
6
7
Added D²PAK package information.
Updated
T
a
ble 3. Electrical characteristics (Tj = 25 °C, unless otherwise
specified) – Snubberless™ (3 quadrants), Section 3 Ordering information and
Section 2.1 D²PAK package information.
15-Mar-2018
01-Mar-2019
8
9
Added RPNs T1035 and T1050.
Updated Links syntax.
DS3165
–
Rev 9
page 11/12
BTA10, BTB10, T1035, T1050
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of S
T
.
A
ll other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
DS3165
–
Rev 9
page 12/12
