STMicroelectronics-BTB16-800BWRG
| Part # | STMicroelectronics-BTB16-800BWRG |
Download  | STMicroelectronics-BTB16-800BWRG |
T1610, T1635, T1650
BTA16, BTB16
Datasheet
Snubberless™, logic level and standard 16 A Triacs
A2
A1
Features
•
•
•
•
Medium current Triac
Low thermal resistance with clip bonding
Low thermal resistance insulation ceramic for insulated BTA
G
High commutation (4Q) or very high commutation (3Q, Snubberless™)
capability
A2
•
•
•
BTA series UL1557 certified (file ref: 81734)
Packages are RoHS (2002/95/EC) compliant
G
G
A2
A2
A1
A1
Insulated tab (BTA series, rated at 2500 V
RMS
)
TO-220AB
TO-220AB Ins.
A2
Applications
•
Snubberless versions (BTA/BTB…W and T1635) especially recommended for
use on inductive loads, because of their high commutation performances
G
A2
A1
D²PAK
•
On/off or phase angle function in applications such as static relays, light
dimmers and appliance motor speed controllers
Description
Available either in through-hole or surface mount packages, the BTA16, BTB16 and
T1610, T1635 and T1650 Triac series are suitable for general purpose mains power
AC switching. They can be used as ON/OFF function in applications such as static
relays, heating regulation or induction motor starting circuit. They are also
recommended for phase control operations in light dimmers and appliance motors
speed controllers.
Product status link
The Snubberless™ versions (W suffix and T1610, T1635, T1650) are especially
recommended for use on inductive loads, because of their high commutation
performance.
By using an internal ceramic pad, the Snubberless™ series provide an insulated tab
(rated at 2500 V
RMS
) complying with UL standards (file reference: E81734).
Product summary
I
16 A
T(RMS)
V
/V
600, 800 V
10, 35, 50 mA
25, 50 mA
DRM RRM
I
Snubberless™
GT
I
standard
GT
DS2114
–
Rev 11
–
May 2018
For further information contact your local STMicroelectronics sales office.
T1610, T1635, T1650, BTA16, BTB16
Characteristics
1
Characteristics
Table 1.
Absolute maximum ratings
Symbol
Parameters
Value
Unit
2
T =
100 °C
c
TO-220AB, D PAK
I
RMS on-state current (full sine wave)
16
A
T(RMS)
T =
86 °C
TO-220AB Ins.
F = 50 Hz
c
t =
20 ms
p
160
168
144
Non repetitive surge peak on-state current (full cycle,
T initial
= 25 °C)
j
I
A
TSM
t =
16.7 ms
p
F = 60 Hz
2
2
2
t =
10 ms
p
I t
I t
value for fusing
A s
Critical rate of rise of on-state current
T =
125 °C
dl/dt
/V
F = 120 Hz
50
A/µs
V
j
I
= 2 x I
, t
≤ 100 ns
GT r
G
V
/V
+
DRM RRM
V
t =
10 ms
p
T =
25 °C
j
Non repetitive surge peak off-state voltage
DSM RSM
100
I
t =
20 µs
p
T =
125 °C
j
Peak gate current
4
A
GM
P
T =
125 °C
j
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
1
W
°C
°C
G(AV)
T
-40 to +150
-40 to +125
stg
T
j
Table 2.
Static electrical characteristics
T
Symbol
Test conditions
= 22.5 A, t
= 380 µs
Value
1.55
Unit
j
I
V
25 °C
Max.
Max.
Max.
V
V
TM
p
T
V
threshold on-state voltage
Dynamic resistance
125 °C
0.85
TO
R
125 °C
25 °C
25
5
mΩ
µA
D
I
/I
V
= V
DRM RRM
Max.
DRM RRM
125 °C
2
mA
1. For
both polarities of A2 referenced to A1
Table 3.
Electrical characteristics (T
j
= 25 °C, unless otherwise specified) – standard (4 quadrants)
BTA16
BTB16
Symbol
Parameters
Quadrant
Unit
C
B
I – II – III
IV
25
50
50
I
Max.
mA
GT
100
V
V
= 12
V
, R
=
3
3 Ω
D
L
V
All
All
Max.
Min.
1.3
0.2
V
V
GT
V
= V
, R
= 3.3 kΩ, T
= 125 °C
GD
D
DRM
L
j
I =
500 mA
I
Max.
Max.
Max.
25
40
80
50
60
mA
T
H
I – III – IV
II
I
I =
1.2 I
G GT
mA
L
120
DS2114
–
Rev 11
page 2/18
T1610, T1635, T1650, BTA16, BTB16
Characteristics
BTA16
BTB16
Symbol
Parameters
Quadrant
Unit
C
200
5
B
V
= 67 % V
gate open, T
= 125 °C
Min.
Min.
400
10
V/µs
V/µs
D
DRM
j
(dI/dt)c = 7 A/ms, T
= 125 °C
j
1. Minimum
I is
guaranteed at 5 % of I
max.
GT
GT
2. For
both polarities of A2 referenced to A1
Table 4.
Electrical characteristics (T
j
= 25 °C, unless otherwise specified) – Snubberless and logic level (3
quadrants)
T1610 / BTA16-
SW / BTB16-
SW
T1635 /
BTA16-CW /
BTB16-CW
T1650 /
BTA16-BW /
BTB16-BW
Symbol
Parameters
Quadrant
Unit
I
Max.
Max.
Min.
10
35
1.3
0.2
50
mA
V
GT
V
V
= 12
V
, R
=
3
0 Ω
D
L
V
I – II – III
GT
V
= V
, R
= 3,3 kΩ, T
= 125 °C
V
GD
D
DRM
L
j
I =
500 mA
I
Max.
Max.
Max.
Min.
15
25
35
50
50
70
mA
T
H
I – III
II
I
I =
1.2 I
G GT
mA
L
30
60
80
VD = 67 % V
gate open, T
= 125 °C
j
40
500
1000
V/µs
DRM
(dV/dt)c = 0.1 V/μs, T
= 125 °C
8.5
3.0
j
(dV/dt)c = 10 V/μs, T
= 125 °C
Min.
A/ms
j
Without snubber, T
= 125 °C
8.5
14
j
1. Minimum
I is
guaranteed at 5 % of I
max.
GT
GT
2. For
both polarities of A2 referenced to A1
Table 5.
Thermal resistance
Parameters
Symbol
Value
1.2
2.1
45
Unit
TO-220AB / D²PAK
R
Max. junction to case (AC)
th(j-c)
th(j-a)
TO-220AB insulated
D²PAK
°C/W
Junction to ambient (S = 2 cm²)
Junction to ambient
R
TO-220AB / TO-220AB ins
60
1. Copper
surface under tab.
DS2114
–
Rev 11
page 3/18
T1610, T1635, T1650, BTA16, BTB16
Characteristics (curves)
1.1
Characteristics (curves)
Figure 2.
Maximum power dissipation versus on-state
RMS current (full cycle)
Figure 3.
RMS on-state current versus case temperature
(full cycle)
P(W)
I
(A)
T(RMS)
20
18
18
16
14
12
10
8
16
14
BTB/T16
BTA
12
10
8
6
6
4
4
2
0
2
T
(°C)
c
I
(A)
T
(RMS)
0
0
25
50
75
100
125
0
2
4
6
8
10
12
14
16
Figure 4.
On-state rms current versus ambient
temperature (full cycle)
Figure 5.
Relative variation of thermal impedance versus
pulse duration
I
(A)
K = [Z
/R
]
T(RMS)
th th
4.0
3.5
1E+0
1E-1
1E-2
Z
th(j-c)
D²PAK
(S = 1 cm²)
Printed circuit board FR4, copper thickness: 35 µm
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Z
th(j-a)
t
(s)
p
T
(°C)
c
1E-3
1E-2
1E-1
1E+0
1E+1
1E+2
5E+2
0
25
50
75
100
125
DS2114
–
Rev 11
page 4/18
T1610, T1635, T1650, BTA16, BTB16
Characteristics (curves)
Figure 7.
Surge peak on-state current versus number of
cycles
Figure 6.
On-state characteristics (maximum values)
I
(A)
TM
I
(A)
TSM
200
100
180
160
140
120
100
80
T max.
j
T =
T max.
j
j
V
R
= 0.85 V
= 25 mΩ
to
d
t=20ms
One cycle
Non repetitive
T
j
initial=25°C
T =
25 °C
j
10
Repetitive
T
C
=85°C
60
40
20
V
TM
(V)
3.0
Num
b
e
r of cycles
1
0
0.5
1.0
1.5
2.0
2.5
3.5
4.0
4.5
5.0
1
10
100
1000
Figure 8.
Non-repetitive surge peak on-state current for a
sinusoidal
Figure 9.
Relative variation of gate trigger current
I
GT
, I
H
, I
L
[Tj] /
I
GT
, I
H
, I
L
[T
j
= 25 °C]
2.5
2.0
1.5
1.0
0.5
0.0
I
TSM
(A),
I
2
t (A
2
s)
h
o
l
ding c
u
r
rent and latc
h
i
n
g
c
u
r
rent vers
u
s
j
u
n
c
t
i
o
n
tem
p
e
rature (ty
p
i
c
a
l va
l
u
es)
3000
T
j
initial=25°C
dI/dt limitation:
50A/µs
I
GT
1000
I
TSM
I
H
& I
L
T( °C)
j
t (ms)
p
p
u
l
s
e
w
i
t
h wi
d
t
h t
p
< 10 ms
-40
-20
02
04
06
08
0
100
120
140
100
0
.
0
1
0
.
1
0
1
.
0
0
10. 00
Figure 10.
Relative variation of critical rate of decrease of
Figure 11.
Relative variation of critical rate of decrease of
main current versus (dV/dt)c (typical values)
main current versus (junction temperature (typical values)
(dl/dt)c [(dV/dt)c] / specified (dl/dt)c
(dl/dt)c [T ] / (dl/dt)c [T
]
j specified
j
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
6
5
SW/T1610
Snubberless and logic level types
C
B
4
3
2
1
0
T1635/T1650/CW/BW
(dV/dt)c (V/µs)
10.0
T (°C)
j
0.1
1.0
100.0
0
25
50
75
100
125
DS2114
–
Rev 11
page 5/18
T1610, T1635, T1650, BTA16, BTB16
Characteristics (curves)
Figure 12.
D²PAK thermal resistance junction to ambient versus copper surface under tab
R
th(j-a)
(°C/W)
80
70
60
50
40
30
20
10
0
D²PAK
Epoxy printed board FR4, copper thickness = 35 µm
S
Cu
(cm²)
35
0
5
10
15
20
25
30
40
DS2114
–
Rev 11
page 6/18
T1610, T1635, T1650, BTA16, BTB16
Package information
2
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions
DS2114
–
Rev 11
page 7/18
T1610, T1635, T1650, BTA16, BTB16
TO-220AB Insulated and non Insulated package information
2.1
TO-220AB Insulated and non Insulated package information
•
•
•
•
Epoxy meets UL 94,V0
Cooling method: by conduction (C)
Recommended torque value: 0.55 N·m
Maximum torque value: 0.70 N·m
Figure 13.
TO-220AB Insulated and non Insulated package outline
C
B
b2
I
Resin gate 0.5 mm
max. protusion
(1)
L
F
A
I4
l3
c2
a1
l2
a2
M
c1
Resin gate 0.5 mm
max. protusion
(1)
b1
e
(1)Resin gate position accepted in one of the two positions or in the symmetrical opposites.
DS2114
–
Rev 11
page 8/18
T1610, T1635, T1650, BTA16, BTB16
TO-220AB Insulated and non Insulated package information
Table 6.
TO-220ABInsulated and non Insulated package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches
Typ.
Min.
Max.
Min.
Max.
A
a1
a2
B
15.20
15.90
0.5984
0.6260
3.75
0.1476
13.00
10.00
0.61
1.23
4.40
0.49
2.40
2.40
6.20
3.73
2.65
1.14
1.14
15.80
14.00
10.40
0.88
1.32
4.60
0.70
2.72
2.70
6.60
3.88
2.95
1.70
1.70
16.80
0.5118
0.3937
0.0240
0.0484
0.1732
0.0193
0.0945
0.0945
0.2441
0.1469
0.1043
0.0449
0.0449
0.6220
0.5512
0.4094
0.0346
0.0520
0.1811
0.0276
0.1071
0.1063
0.2598
0.1528
0.1161
0.0669
0.0669
0.6614
b1
b2
C
c1
c2
e
F
I
L
I2
I3
I4
M
16.40
2.6
0.6457
0.1024
1. Inch
dimensions are for reference only.
DS2114
–
Rev 11
page 9/18
T1610, T1635, T1650, BTA16, BTB16
D²PAK package information
2.2
D²PAK package information
Figure 14.
D²PAK package outline
A
E1
E2
E
c2
b2
Resin gate
0.5 mm max.
protrusion(1)
e
b
G
A1
A2
A3
R
Gauge Plane
(1) Resin gate position accepted in one of the two positions or in the symmetrical opposites
DS2114
–
Rev 11
page 10/18
T1610, T1635, T1650, BTA16, BTB16
D²PAK package information
Table 7.
D²PAK package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches
Typ.
Min.
4.30
2.49
0.03
Max.
4.60
2.69
0.23
Min.
Max.
A
A1
A2
A3
b
0.1693
0.0980
0.0012
0.1811
0.1059
0.0091
0.25
0.0098
0.70
1.25
0.45
1.21
8.95
7.50
1.30
2.54
10.00
8.30
6.85
4.88
15
0.93
1.7
0.0276
0.0492
0.0177
0.0476
0.3524
0.2953
0.0512
0.1
0.0366
0.0669
0.0236
0.0535
0.3681
0.3150
0.0669
b2
c
0.60
1.36
9.35
8.00
1.70
c2
D
D1
D2
e
E
10.28
8.70
7.25
5.28
15.85
2.28
1.40
1.75
0.3937
0.3268
0.2697
0.1921
0.5906
0.0701
0.0500
0.0551
0.4047
0.3425
0.2854
0.2079
0.6240
0.0898
0.0551
0.0689
E1
E2
G
H
L
1.78
1.27
1.40
L2
L3
R
0.40
0.0157
V2
0°
8°
0°
8°
1. Dimensions
in inches are given for reference only
DS2114
–
Rev 11
page 11/18
T1610, T1635, T1650, BTA16, BTB16
D²PAK package information
Figure 15.
D²PAK recommended footprint (dimensions are in mm)
16.90
10.30
5.08
1.30
3.70
8.90
DS2114
–
Rev 11
page 12/18
T1610, T1635, T1650, BTA16, BTB16
Ordering information
3
Ordering information
Figure 16.
Ordering information scheme (BTA16 and BTB16 series)
BT A 16
– 600
BW (RG)
Triac
Insulation
A = Insulated
B = Non-insulated
Current
16 = 16 A
Voltage
60
0
=
6
00 V
80
0
=
8
00 V
Sensitivity and type
B = 50 mA
BW = 50 mA Snubberless™
C = 25 mA standard
SW = 10 mA logic level
Packing mode
CW = 35 mA Snubberless™
RG = Tube
DS2114
–
Rev 11
page 13/18
T1610, T1635, T1650, BTA16, BTB16
Ordering information
Figure 17.
Ordering information scheme (T8 series)
T 16
35 –
600
G (-TR)
Triac series
Current
16 = 16 A
Sensitivity
10 = 10 mA
35 = 35 mA
50 = 50 mA
Voltage
60
0
=
6
00 V
80
0
=
8
00 V
Package
G = D²PAK
Packing mode
Blank =
Tube
TR =
T
a
pe and reel
DS2114
–
Rev 11
page 14/18
T1610, T1635, T1650, BTA16, BTB16
Product selector
3.1
Product selector
Table 8.
Product selector
Part Number
Sensitivity
Type
Package
600
800
BTB16-600C
BTB16-600B
BTB16-600SW
BTB16-600CW
BTB16-600BW
BTA16-600C
BTA16-600B
BTA16-600SW
BTA16-600CW
BTA16-600BW
T1610-600G
35 mA
50 mA
10 mA
35 mA
50 mA
35 mA
50 mA
10 mA
35 mA
50 mA
10 mA
Standard
Standard
TO-220AB
TO-220AB
BTB16-800B
BTB16-800SW
BTB16-800CW
BTB16-800BW
Snubberless™
Snubberless™
Snubberless™
Standard
TO-220AB
TO-220AB
TO-220AB
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
BTA16-800B
BTA16-800SW
BTA16-800CW
BTA16-800BW
T1610-800G
Standard
Snubberless™
Snubberless™
Snubberless™
Snubberless™
2
D PAK
2
T1635-600G
T1650-600G
T1635-800G
35 mA
50 mA
Snubberless™
Snubberless™
D PAK
2
D PAK
DS2114
–
Rev 11
page 15/18
T1610, T1635, T1650, BTA16, BTB16
Ordering information
3.2
Ordering information
Table 9.
Ordering information
Order code
Marking
Package
Weight
Base qty.
Delivery mode
BTA16-600BRG
BTA16-600B
BTA16-600BWRG
BTA16-600CRG
BTA16-600CWRG
BTA16-600SWRG
BTA16-800BRG
BTA16-800BWRG
BTA16-800CWRG
BTA16-800SWRG
BTB16-600BRG
BTB16-600BWRG
BTB16-600CRG
BTB16-600CWRG
BTB16-600SWRG
BTB16-800BRG
BTB16-800BWRG
BTB16-800CWRG
BTB16-800SWRG
T1610-600G-TR
T1610-800G-TR
T1635-600G-TR
T1635-800G-TR
T1650-600G-TR
T1635-600G
BTA16-600BW
BTA16-600C
BTA16-600CW
BTA16-600SW
BTA16-800B
BTA16-800BW
BTA16-800CW
BTA16-800SW
BTB16-600B
BTB16-600BW
BTB16-600C
BTB16-600CW
BTB16-600SW
BTB16-800B
BTB16-800BW
BTB16-800CW
BTB16-800SW
T1610-600G
TO-220AB Ins.
Tube
2.30
50
TO-220AB
Tube
T1610-800G
T1635-600G
1000
50
T
a
pe and reel
Tube
D²PAK
1.50
T1635-800G
T1650-600G
T1635-600G
DS2114
–
Rev 11
page 16/18
T1610, T1635, T1650, BTA16, BTB16
Revision history
Table 10.
Document revision history
Date
Revision
Changes
Oct-2002
6A
Last update.
TO-220AB delivery mode changed from bulk to tube. ECOPACK statement
added.
13-Feb-2006
03-Jul-2009
04-Dec-2009
7
8
9
Added part number T1610.
Updated value for V
from 15 °C to 86 °C.
/ V
in
T
a
ble 2. Updated temperature in
T
a
ble 2
in
T
a
ble 2. Updated temperature in
T
a
ble 2
DSM
RSM
RSM
Updated value for V
/ V
DSM
11-Mar-2010
30-May-2018
10
11
from 15 °C to 86 °C.
information.
DS2114
–
Rev 11
page 17/18
T1610, T1635, T1650, BTA16, BTB16
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of S
T
.
A
ll other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS2114
–
Rev 11
page 18/18
