STMicroelectronics-ULN2075B

ULN2065B, ULN2067B  

ULN2069B, ULN2075B  

80 V – 1.5 A quad Darlington switches  

Features  

■

Output current to 1.5 A for each Darlington  

■

Minimum breakdown 80 V  

■

Sustaining voltage at least 35 V  

■

Integral suppression diodes (ULN2065B,  

ULN2067B and ULN2069B  

■

Isolated Darlington pinout (ULN2075B)  

PowerDIP-16  

■

Versions compatible with all popular logic  

families  

Description  

Designed to interface logic to a wide variety of  

high current, high voltage loads, these devices  

each contain four NPN Darlington switches  

delivering up to 1.5 A with a specified minimum  

breakdown of 50 V and a sustaining voltage of 35  

V measured at 100 mA. The ULN2067B and  

ULN2069B contain integral suppression diodes  

for inductive loads have common emitters. The  

ULN2075B feature isolated Darlington pinouts  

and is intended for applications such as emitter  

follower configurations.  

Inputs of the ULN2065B, ULN2069B and  

ULN2075B are compatible with popular 5 V logic  

families and the ULN2067B is compatible with 6-  

15 V CMOS and PMOS.

T

y

pe ULN2069B  

includes a pre-driver stage to reduce loading on  

the control logic.  

Table 1.  

Device summary  

Part numbers  

Package  

ULN2065B  

ULN2067B  

ULN2069B  

ULN2075B  

PowerDIP-16  

PowerDIP-16  

PowerDIP-16  

PowerDIP-16  

January 2009  

Rev 2  

1/13  

13  

Contents  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Contents  

1

2

3

4

5

6

7

8

2/13  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Diagram  

1

Diagram  

Figure 1.  

Schematic diagrams  

ULN2065B: R

IN

= 350

Ω

 

ULN2067B: R

IN

= 3k

Ω  

ULN2069B: R

IN

= 2.5k

Ω

, R

S

= 900

Ω  

ULN2075B: R

IN

= 350

Ω  

3/13  

Pin configuration  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

2

Pin configuration  

Figure 2.  

Pin connections (top view)  

ULN2065B  

ULN2067B  

ULN2069B  

ULN2075B  

4/13  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Maximum ratings  

3

Maximum ratings  

Table 2.  

Absolute maximum ratings  

Symbol  

V

CEX  

V

CE(SUS)  

I

O  

Parameter  

Value  

Unit  

Output voltage  

80  

50  

1.75  

60  

30  

15  

25  

10  

4.3  

1

V

V

A

Output sustaining voltage  

Output current  

Input voltage ULN2075B  

Input voltage ULN2067B  

Input voltage ULN2065B – ULN2069B  

Input current  

V

I  

V

I

I  

mA  

V

V

S  

Supply voltage for ULN2068B  

Power dissipation at T

PINS

= 90 °C  

Power dissipation at T

AMB

= 70 °C  

Operating ambient temperature range  

Storage temperature  

P

TOT  

W

T

AMB  

T

STG  

– 20 to 85  

°C  

°C  

– 55 to 150  

5/13  

Electrical characteristics  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

4

Electrical characteristics  

Table 3.  

Symbol  

Electrical characteristics

(

T

A

= 25 °C unless otherwise specified).  

Parameter  

Test condition  

V

CE

= 80

V

,

T

A

= 25°C  

Min.  

Typ. Max.  

Unit  

100  

500  

Output leakage current  

I

CEX  

µA  

(

Fi

V

CE

= 80

V

,

T

A

= 70°C  

I

C

= 100mA, V

I

= 0.4V  

Collector-emitter sustaining  

voltage (

V

CE(SUS)  

50  

V

I

C

= 500mA, I

B

= 625µA  

I

C

= 750mA, I

B

= 935µA  

I

C

= 1A, I

B

= 1.25mA  

I

C

= 1.25A, I

B

= 2mA  

I

C

= 1.5A, I

B

= 2.25mA  

1.1  

1.2  

1.3  

1.4  

1.5  

Collector-emitter saturation  

voltage (

V

CE(SAT)  

V

for ULN2065B and ULN2075B  

V

I

= 2.4V  

V

I

= 3.75V  

1.4  

3.3  

4.3  

9.6  

for ULN2067B,  

V

I

= 5V  

V

I

= 12V  

I

I(ON)  

Input current (

0.6  

1.7  

1.8  

5.2  

mA  

for ULN2069B,  

V

I

= 2.75V  

V

I

= 3.75V  

0.55  

1.0  

V

CE

= 2

V

,

I

C

= 1A  

ULN2065B, ULN2075B,  

ULN2067B  

2

6.5  

V

I(ON)

Input voltage (

V

CE

= 2

V

,

I

C

= 1.5A  

ULN2065B, ULN2075B,  

ULN2067B  

V

2.5  

10  

ULN2069B  

2.75  

for ULN2069B, V

I

= 2.75

V

,  

I

C

= 500mA  

I

S  

Supply Current (

6

mA  

t

PLH  

t

PHL  

T

u

rn-on delay time  

T

u

rn-off delay time  

0.5 V

I

to 0.5V

O  

0.5 V

I

to 0.5V

O  

1

µs  

µs  

1.5  

For ULN2065B – ULN2067B –  

ULN2069B, V

R

= 50V  

T

A

= 25°C  

Clamp diode leakage current  

(

Fi

I

R  

µA  

V

50  

100  

T

A

= 70°C  

For ULN2065B – ULN2067B –  

ULN2069B  

I

F

= 1A  

Clamp diode forward voltage  

(

Fi

V

F  

1.75  

2

I

F

= 1.5A  

Note:  

Input voltage is with reference to the substrate (no connection to any other pins) for the  

ULN2075B reference is ground for all other types.  

Note:  

1

Input current may be limited by maximum allowable input voltage.  

6/13  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Test circuits  

5

Test circuits  

Figure 3.  

Output leakage current  

Figure 4.  

Collector-emitter sustaining  

voltage  

Figure 5.  

Collector-emitter saturation voltage

 

Figure 6.  

Input current (ON)  

Figure 7.  

Input voltage  

Figure 8.  

Clamp diode leakage current  

7/13  

Test circuits  

Figure 9.  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Figure 10.

 

Supply current  

Clamp diode forward voltage  

Figure 11.

 

Input current as a function of input

 

Figure 12.

 

Input current as a function of input  

voltage  

voltage  

Figure 13.

 

Collector current as a function of  

input current  

8/13  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Mounting instructions  

6

Mounting instructions  

The R  

can be reduced by soldering the GND pins to a suitable copper area of the printed  

thJA  

circuit board (

to an external heatsink (

Fi

The diagram of

ws the maximum dissipated power P  

and the R  

as a  

TOT  

thJA  

function of th

o equal square copper areas having a thickness of 35 µ (1.4  

mils).  

During soldering the pins temperature must not exceed 260 °C and the soldering time must  

not be longer than 12 seconds.  

The external heatsink or printed circuit copper area must be connected to electrical ground.  

Figure 14.

 

Example of

P

.

C. board area which

 

Figure 15.

 

External heatsink mounting  

is used as heatsink  

example  

Figure 16.

 

Maximum dissipated power and  

junction to ambient thermal  

Figure 17.

 

Maximum allowable power  

dissipation vs. ambient  

temperature  

resistance vs. side “

α

”  

9/13  

Package mechanical data  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

7

Package mechanical data  

In order to meet environmental requirements, ST offers these devices in different grades of  

ECO

P

ACK® packages, depending on their level of environmental compliance. ECO

P

ACK®  

specifications, grade definitions and product status are available at:

ECO

P

ACK® is an ST trademark.  

10/13  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Package mechanical data  

mm  

inch.  

Dim.  

OUTLINE AND  

MECHANICAL DATA  

Min.  

0.51  

0.

8

5  

Typ. Max.

 

Min.  

Typ. Max.  

a

1  

B

b

0.020  

1.40 0.0

33  

0.055  

0.020  

0.50  

0.50 0.015  

20.0  

b

1  

D

E

e

0.

38  

0.020  

0.7

8

7  

8

.

8

0  

0.

3

46  

2.54  

0.100  

e

3  

F

17.7

8  

7.10  

0.700  

0.2

8

0  

I

5.10  

0.201  

L

3

.

3

0  

0.1

3

0  

PowerDIP-16  

Z

1.27  

0.050  

11/13  

Revision history  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

8

Revision history  

Table 4.  

Document revision history  

Revision  

Date  

Changes  

12-Sep-2003  

22-Jan-2009  

1

2

First release.  

Added

T

12/13  

ULN2065B, ULN2067B, ULN2069B, ULN2075B  

Please Read Carefully:  

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the  

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any  

time, without notice.  

All ST products are sold pursuant to ST’s terms and conditions of sale.  

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no  

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.  

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this  

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products  

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such  

third party products or services or any intellectual property contained therein.  

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED  

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED  

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS  

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.  

UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT  

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING  

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,  

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE  

GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.  

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void  

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any  

liability of ST.  

ST and the ST logo are trademarks or registered trademarks of ST in various countries.  

Information in this document supersedes and replaces all information previously supplied.  

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.  

© 2009 STMicroelectronics – All rights reserved  

STMicroelectronics group of companies  

Australia – Belgium – Brazil – Canada – China – Czech Republic – Finland – France – Germany – Hong Kong – India – Israel – Italy – Japan –  

Malaysia – Malta – Morocco – Singapore – Spain – Sweden – Switzerland – United Kingdom – United States of America  

13/13