Taiyo-Yuden-FBMH2012HM221-TV
| Part # | Taiyo-Yuden-FBMH2012HM221-TV |
Download  | Taiyo-Yuden-FBMH2012HM221-TV |
[ For High Quality and/or Reliability Equipment
Notice for
T
A
IYO YUDEN Products
(Automotive Electronic Equipment / Industrial Equipment)
]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment), medical
equipment classified as Class I or II by IMDR
F
, industrial equipment, and automotive interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which
may directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
medical equipment classified as Class III by IMDRF).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDR
F
, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafte
r
“
TAIYO YUDEN
s
’
official sales channel
”
). Please note that the contents of this
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN
’
s official sales
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according t
o
“
U.S. Export
Administration Regulations
”
,
“
Foreign Exchange and Foreign Trade Control Law
”
of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
19
Automotive Application Guide
We classify automotive electronic equipment into the following four application categories and set usable
application categories for each of our products. When using our products for automotive electronic
equipment, please be sure to check such application categories and use our products accordingly. Should
you have any questions on this matter, please contact us.
Category
Automotive Electronic Equipment (Typical Example)
・Engine ECU (Electronically Controlled Fuel Injector)
・Cruise Control Unit
・4WS (4 Wheel Steering)
・Automatic Transmission
POWERTRAIN
・Power Steering
・HEV/PHV/EV Core Control (Battery, Inverter, DC-DC)
・Automotive Locator (Car location information providing device), etc.
・ABS (Anti-Lock Brake System)
・ESC (Electronic Stability Control)
・Airbag
SAFETY
・ADAS (Equipment that directly controls running, turning and stopping), etc.
・Wiper
・Automatic Door
・Power Window
・Keyless Entry System
・Electric Door Mirror
・Interior Lighting
・LED Headlight
・TPMS (Tire Pressure Monitoring System)
・Anti-Theft Device (Immobilizer), etc.
・Car Infotainment System
・ITS/Telematics System
・Instrument Cluster
BODY & CHASSIS
INFOTAINMENT
・
ADAS (Sensor, Equipment that is not interlocked with safety equipment or powertrain), etc.
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
15
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
REFLOW
AEC-Q200
AEC-Q200 Grade 3 (we conduct the evaluation at the test condition of Grade 3.)
*Operating environment Temp:-40～85℃
■
PART NUMBER
*Operating Temp. :
-40～125℃（Including self-generated heat）
F
B
△
M
J
3
2
1
6
H
S
8
0
0
－
⑦
T
V
△＝Blank space
①
②
③
④
⑤
⑥
⑧
⑨
①Series name
⑤Material
Code
HS
Code
FB
Series name
Ferrite bead
Material
Refer to impedance curves
for material differences
HM
②Shape
Code
M
HL
Shape
Rectangular chip
⑥Nominal impedance
Code
（example）
330
Nominal impedance［
Ω
］
③Characteristics
Code
Characteristics
Standard
33
J
221
220
H
High Impedance type
102
1000
④Dimensions（L×W）
Code
⑦Impedance tolerance
Dimensions
（L×W）［mm］
1.6×0.8
Code
－
Impedance tolerance
±25％
Type（inch）
1608
2125
2012
2016
3216
3225
4516
4525
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
N
±30％
2.0×1.25
⑧Packaging
2.0×1.6
3.2×1.6
3.2×2.5
4.5×1.6
4.5×2.5
Code
T
Packaging
Taping
⑨Internal code
Code
V
Internal code
Bead Inductor for Industrial and Automotive
W
■
FEATURES
／
●
HS：For broadband applications
●
HM：For upper MHz range applications
●
HL：For GHz range applications
■
STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Recommended Land Patterns
Surface Mounting
Type
A
1.0
1.4
1.4
1.75
1.0
1.4
1.4
1.4
B
C
1.0
1.65
2.0
2.0
1.0
1.65
2.0
2.0
2.9
2.0
2.9
W
FB MJ1608
FB MJ2125
FB MJ3216
FB MJ4516
FB MH1608
FB MH2012
FB MH2016
FB MH3216
FB MH3225
FB MH4516
FB MH4525
1.0
1.2
2.2
3.5
1.0
1.2
1.2
2.2
2.2
3.5
3.5
・Mounting and soldering conditions should be
checked beforehand.
L
T
C
e
1.4
1.75
1.75
A
B
A
Unit：mm
Standard quantity [pcs]
Paper tape
Embossed tape
Type
L
W
T
e
FB MJ1608
（0603）
FB MJ2125
（0805）
FB MJ3216
（1206）
FB MJ4516
（1806）
FB MH1608
（0603）
FB MH2012
（0805）
FB MH2016
（0806）
FB MH3216
（1206）
1.6±0.2
（0.063±0.008）
2.0±0.2
（0.079±0.008）
3.2±0.3
（0.126±0.012）
4.5±0.3
（0.177±0.012）
1.6±0.1
（0.063±0.004）
2.0±0.2
（0.079±0.008）
2.0±0.2
（0.079±0.008）
3.2±0.3
（0.126±0.012）
3.2±0.3
0.8±0.2
（0.031±0.008）
1.25±0.2
（0.049±0.008）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
0.8±0.1
（0.031±0.004）
1.25±0.2
（0.049±0.008）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
2.5±0.3
0.8±0.2
（0.031±0.008）
0.85±0.2
（0.033±0.008）
1.1±0.2
（0.043±0.008）
1.1±0.2
（0.043±0.008）
0.8±0.1
（0.031±0.004）
0.85±0.2
（0.033±0.008）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.063±0.008）
2.5±0.3
0.3±0.2
（0.012±0.008）
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.3±0.15
（0.012±0.006）
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.5±0.3
4000
4000
－
－
－
2000
2000
－
－
4000
4000
－
－
2000
2000
1000
2000
－
FB MH3225
（1210）
FB MH4516
（1806）
FB MH4525
（1810）
－
（0.126±0.012）
4.5±0.3
（0.177±0.012）
4.5±0.4
（0.098±0.012）
1.6±0.2
（0.063±0.008）
2.5±0.3
（0.098±0.012）
1.6±0.2
（0.063±0.008）
2.5±0.3
（0.020±0.012）
0.5±0.3
（0.020±0.012）
0.9±0.6
－
－
1000
（0.177±0.016）
（0.098±0.012）
（0.098±0.012）
（0.035±0.024）
Unit：mm（inch）
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
85
■
PART NUMBER
・ All the Chip Bead Inductors for Power Lines of the catalog lineup are RoHS compliant.
Note)
ꢀ・ The exchange of individual specifications is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels.
ꢀ・ *1: Automotive (AEC-Q200 Qualified) products for BODY & CHASSIS, and INFOTAINMENT. Please check ”Automotive Application Guide” for further details before using the products.
AEC-Q200
ꢀꢀ＜ꢀꢀ
ꢀ：AEC-Q200 qualified＞
ꢀꢀꢀꢀꢀAll the Chip Bead Inductors for Power Lines ofꢀ*1 marks are tested based on the test conditions and methods defined in AEC-Q200 by family item.
ꢀꢀꢀꢀꢀPlease consult with TAIYO YUDEN’s official sales channel for the details of the product specification and AEC-Q200 test results, etc.,
ꢀꢀꢀꢀꢀand please review andꢀapprove TAIYO YUDEN’s product specification before ordering.
・ *2: Industrialꢀproducts and Medical products
Standard type
●
FB MJ1608
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Part number
Impedance tolerance
Note
28
23
±30％
±30％
100
100
FB MJ1608HS280NTV
FB MJ1608HM230NTV
0.007
0.007
4.0
4.0
0.8 ±0.2
0.8 ±0.2
*1, *2
*1, *2
●
FB MJ2125
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
25
42
21
33
8
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
FB MJ2125HS250NTV
FB MJ2125HS420-TV
FB MJ2125HM210NTV
FB MJ2125HM330-TV
FB MJ2125HL8R0NTV
0.004
0.008
0.004
0.008
0.008
6.0
4.0
6.0
4.0
4.0
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
●
FB MJ3216
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
48
80
38
60
16
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
FB MJ3216HS480NTV
FB MJ3216HS800-TV
FB MJ3216HM380NTV
FB MJ3216HM600-TV
FB MJ3216HL160NTV
0.005
0.010
0.005
0.010
0.012
6.0
4.0
6.0
4.0
4.0
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
●
FB MJ4516
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
72
110
56
±30％
±25％
±30％
±25％
±30％
100
100
100
100
100
FB MJ4516HS720NTV
FB MJ4516HS111-TV
FB MJ4516HM560NTV
FB MJ4516HM900-TV
FB MJ4516HL230NTV
0.007
0.014
0.007
0.014
0.014
6.0
4.0
6.0
4.0
3.5
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
90
23
High impedance type（ＧＨz Band）
●
FB MH1608
／
Nominal impedance
Measuring frequency 100［MHz］
Nominal impedance
Measuring frequency 1［GHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Part number
Note
（Ω）
47
（Ω）
75
tolerance
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
tolerance
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
±40％
FB MH1608HM470-TV
FB MH1608HM600-TV
FB MH1608HM101-TV
FB MH1608HM151-TV
FB MH1608HM221-TV
FB MH1608HM331-TV
FB MH1608HM471-TV
FB MH1608HM601-TV
FB MH1608HM102-TV
FB MH1608HL300-TV
FB MH1608HL600-TV
FB MH1608HL121-TV
FB MH1608HL221-TV
FB MH1608HL331-TV
FB MH1608HL471-TV
FB MH1608HL601-TV
0.020
0.025
0.035
0.050
0.070
0.130
0.150
0.170
0.350
0.028
0.045
0.130
0.170
0.210
0.350
0.450
3.5
3.0
2.5
2.1
1.8
1.2
1.0
0.9
0.6
2.6
2.1
1.2
0.9
0.8
0.6
0.5
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
*1, *2
60
100
170
270
370
520
750
900
1200
120
220
540
950
1200
1500
1800
100
150
220
330
470
600
1000
30
60
120
220
330
470
600
※）The rated current is the value of current at which the temperature of the element is increased by 40 deg.
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
86
■
PART NUMBER
High impedance type
●
FB MH2012
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Part number
Impedance tolerance
Note
80
±25％
±25％
±25％
±25％
100
100
100
100
FB MH2012HM800-TV
FB MH2012HM121-TV
FB MH2012HM221-TV
FB MH2012HM331-TV
0.025
0.032
0.060
0.080
2.7
2.5
2.0
1.8
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
*1, *2
*1, *2
*1, *2
*1, *2
120
220
330
●
FB MH2016
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
120
250
±30％
±30％
100
100
FB MH2016HM121NTV
FB MH2016HM251NTV
0.015
0.050
4.5
2.0
1.6 ±0.2
1.6 ±0.2
*1, *2
*1, *2
●
FB MH3216
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
220
500
±30％
±30％
100
100
FB MH3216HM221NTV
FB MH3216HM501NTV
0.020
0.070
4.0
2.0
1.6 ±0.2
1.6 ±0.2
*1, *2
*1, *2
●
FB MH3225
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
600
1000
2000
±30％
±30％
±30％
100
100
100
FB MH3225HM601NTV
FB MH3225HM102NTV
FB MH3225HM202NTV
0.042
0.100
0.130
3.0
2.0
1.2
2.5 ±0.3
2.5 ±0.3
2.5 ±0.3
*1, *2
*1, *2
*1, *2
●
FB MH4516
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Part number
Impedance tolerance
±30％
Note
850
100
FB MH4516HM851NTV
0.100
1.5
1.6 ±0.2
*1, *2
●
FB MH4525
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
1000
1600
±30％
±30％
100
100
FB MH4525HM102NTV
FB MH4525HM162NTV
0.060
0.130
3.0
2.0
2.5 ±0.3
2.5 ±0.3
*1, *2
*1, *2
●
High current type
Part number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Impedance tolerance
Note
22
28
18
23
±30％
±30％
±30％
±30％
100
100
100
100
FB MJ1608HS220NTW
FB MJ1608HS280NTW
FB MJ1608HM180NTW
FB MJ1608HM230NTW
0.004
0.006
0.004
0.006
7.5
6.0
7.5
6.0
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
*1, *2
*1, *2
*1, *2
*1, *2
※）The rated current is the value of current at which the temperature of the element is increased by 40 deg.
／
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
87
■
ELECTRICAL CHARACTERISTICS
Standard type
■
FB MJ1608
■
FB MJ2125
FB MJ1608HS280NTV
FB MJ1608HM230NTV
FB MJ2125HS250NTV
35
30
25
20
15
10
5
50
40
30
20
10
0
30
25
20
15
10
5
Z
Z
Z
R
R
R
X
X
X
0
0
1
1
1
1
1
10
100
1000
10000
10000
10000
1
1
1
1
1
10
100
1000
10000
1
1
1
1
1
10
100
1000
10000
10000
10000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MJ2125HS420-TV
FB MJ2125HM210NTV
FB MJ2125HM330-TV
50
40
30
20
10
0
50
40
30
20
10
0
70
60
50
40
30
20
10
0
Z
Z
Z
R
R
R
X
X
X
10
100
1000
10
100
1000
10000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MJ3216
FB MJ2125HL8R0NTV
FB MJ3216HS480NTV
FB MJ3216HS800-TV
50
40
30
20
10
0
60
50
40
30
20
10
0
100
80
60
40
20
0
Z
Z
R
Z
R
R
X
X
X
／
10
100
1000
10
100
1000
10000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MJ3216HM380NTV
FB MJ3216HM600-TV
FB MJ3216HL160NTV
80
70
60
50
40
30
20
10
0
120
100
80
60
40
20
0
100
80
60
40
20
0
Z
Z
R
Z
R
R
X
X
X
10
100
1000
10000
10
100
1000
10000
10
100
1000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MJ4516
FB MJ4516HS720NTV
FB MJ4516HS111-TV
FB MJ4516HM560NTV
100
80
60
40
20
0
140
120
100
80
120
100
80
60
40
20
0
Z
Z
Z
R
R
R
60
40
X
X
X
20
0
10
100
1000
10000
10
100
1000
10000
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
88
■
ELECTRICAL CHARACTERISTICS
FB MJ4516HM900-TV
FB MJ4516HL230NTV
160
140
120
100
80
140
120
100
80
Z
R
R
Z
60
X
60
40
40
X
20
20
0
0
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
High impedance type(GHz Band）
■
FB MH1608
FB MH1608HM470-TV
FB MH1608HM600-TV
FB MH1608HM101-TV
80
70
60
50
40
30
20
10
0
120
100
80
60
40
20
0
200
150
100
50
Z
Z
Z
R
R
R
X
X
X
0
1
1
1
1
10
100
1000
10000
1
1
1
1
10
100
1000
10000
1
1
1
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HM151-TV
FB MH1608HM221-TV
FB MH1608HM331-TV
300
250
200
150
100
50
400
350
300
250
200
150
100
50
600
500
400
300
200
100
0
Z
Z
Z
R
R
R
X
X
X
／
0
0
10
100
1000
10000
10
100
1000
10000
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HM471-TV
FB MH1608HM601-TV
FB MH1608HM102-TV
800
700
600
500
400
300
200
100
0
1000
800
600
400
200
0
1600
1400
1200
1000
800
600
400
200
0
Z
Z
Z
R
R
R
X
X
X
10
100
1000
10000
10
100
1000
10000
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HL121-TV
FB MH1608HL300-TV
FB MH1608HL600-TV
200
150
100
50
350
300
250
200
150
100
50
700
600
500
400
300
200
100
0
Z
Z
R
X
Z
R
R
X
X
0
0
10
100
1000
10000
10
100
1000
10000
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
89
■
ELECTRICAL CHARACTERISTICS
FB MH1608HL221-TV
FB MH1608HL331-TV
FB MH1608HL471-TV
1200
1000
800
600
400
200
0
1600
1400
1200
1000
800
600
400
200
0
2000
1500
1000
500
0
Z
Z
Z
R
R
R
X
X
X
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MH1608HL601-TV
2500
2000
1500
1000
500
Z
R
X
0
1
10
100
1000
10000
Frequency[MHz]
High impedance type
■
FB MH2012
FB MH2012HM800-TV
FB MH2012HM121-TV
FB MH2012HM221-TV
140
120
100
80
200
150
100
50
400
350
300
250
200
150
100
50
Z
Z
Z
R
R
R
60
40
20
X
X
X
／
0
1
0
0
10
100
1000
10000
10000
10000
1
1
1
10
100
1000
10000
1
1
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MH2016
FB MH2012HM331-TV
FB MH2016HM121NTV
FB MH2016HM251NTV
600
500
400
300
200
100
200
400
350
300
250
200
150
100
50
Z
Z
150
100
50
Z
R
R
R
X
X
X
1000
0
1
0
0
10
100
1000
10
100
Frequency[MHz]
10000
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
■
FB MH3216
■
FB MH3225
FB MH3216HM221NTV
FB MH3216HM501NTV
FB MH3225HM601NTV
350
300
250
200
150
100
50
800
700
600
500
400
300
200
100
0
800
700
600
500
400
300
200
100
0
Z
Z
R
Z
R
R
X
X
X
1000
0
1
10
100
Frequency[MHz]
10
100
1000
10000
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
90
■
ELECTRICAL CHARACTERISTICS
■
FB MH4516
FB MH3225HM102NTV
FB MH3225HM202NTV
FB MH4516HM851NTV
1200
1000
800
600
400
200
0
2500
2000
1500
1000
500
1400
1200
1000
800
600
400
200
0
Z
R
Z
Z
R
R
X
X
X
0
1
1
1
10
100
1000
10000
1
1
1
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
FB MH4525
■
High current type
FB MH4525HM102NTV
FB MH4525HM162NTV
FB MJ1608HS220NTW
1400
1200
1000
800
600
400
200
0
2000
1500
1000
500
0
30
25
20
15
10
5
R
R
Z
Z
Z
R
X
X
X
0
10
100
1000
10000
10
100
1000
10000
1
10
100
1000
10000
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
FB MJ1608HS280NTW
FB MJ1608HM180NTW
FB MJ1608HM230NTW
35
30
25
20
15
10
5
40
35
30
25
20
15
10
5
50
40
30
20
10
0
Z
Z
Z
R
R
R
X
X
X
0
0
10
100
1000
10000
10
100
1000
10000
1
10
100
1000
10000
／
Frequency[MHz]
Frequency[MHz]
Frequency[MHz]
■
Derating of Rated Current
●
FB series M type
Derating of current is necessary for FB series M type depending on ambient temperature.
Please refer to the chart shown below for appropriate derating of current.
FB series M type
120
100
80
60
40
20
0
-40 -20
0
20 40 60
80 100 120 140
Ambient Temperature (
℃
)
▶
ꢀ
T
hisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀproductꢀspecificationꢀsheets.ꢀ
ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀwebsiteꢀ(http:
/
/
www.ty-top.com/)ꢀ.ꢀ
19
91
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
■
PACKAGING
①Minimum Quantity
Standard Quantity［pcs］
Type
Paper Tape
Embossed Tape
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
4532（1812）
4000
4000
4000
－
－
－
－
2000
2000
1000
2000
1000
2000
－
－
－
－
－
②Tape Material
●
Card board carrier tape
Top tape
Base tape
Chip Filled
Sprocket hole
Chip cavity
Bottom tape
Chip
●
Embossed tape
Top tape
Chip Filled
Sprocket hole
Chip cavity
Base tape
Chip
③Taping Dimensions
●
Paper tape (0.315 inches wide)
1.75±0.1
(0.069±0.004）
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
Sprocket hole
T
A
B
4.0±0.1
(0.157±0.004)
2.0±0.05
F
(0.079±0.002)
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type
A
B
FBMJ1608
FBMH1608
（0603）
1.0±0.2
1.8±0.2
4.0±0.2
1.1max
（0.039±0.008）
（0.071±0.008）
（0.157±0.008）
（0.043max）
FBMJ2125
FBMH2012
（0805）
1.5±0.2
2.3±0.2
4.0±0.2
1.1max
（0.059±0.008）
（0.091±0.008）
（0.157±0.008）
（0.043max）
Unit : mm（inch）
●
Embossed tape (0.315 inches wide)
φ1.5＋0.1/－0
(φ0.059＋0.004/-0)
1.75±0.1
(0.069±0.004）
Sprocket hole
A
B
4.0±0.1
(0.157±0.004)
2.0±0.05
F
(0.079±0.002)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FBMH2016
（0806）
1.8±0.2
2.2±0.2
（0.087±0.008）
3.5±0.2
4.0±0.2
2.6max
0.6max
（0.071±0.008）
1.9±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
1.5max
（0.024max）
0.3max
FBMJ3216
（1206）
（0.075±0.008）
1.9±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FBMH3216
（1206）
（0.075±0.008）
2.8±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FBMH3225
（1210）
（0.110±0.008）
（0.138±0.008）
（0.157±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
●
Embossed tape (0.472 inches wide)
φ1.5＋0.1/－0
1.75±0.1
(0.069±0.004）
(φ0.059＋0.004/-0)
Sprocket hole
T
A
B
K
F
4.0±0.1
(0.157±0.004)
2.0±0.05
(0.079±0.002)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FBMJ4516
（1806）
1.9±0.2
4.9±0.2
4.0±0.2
1.5max
0.3max
（0.075±0.008）
1.9±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FBMH4516
（1806）
（0.075±0.008）
2.9±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FBMH4525
（1810）
（0.114±0.008）
3.6±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
8.0±0.2
（0.157max）
4.0max
（0.024max）
0.6max
FBMH4532
（1812）
（0.142±0.008）
（0.193±0.008）
（0.315±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
④Leader and Blank portion
⑤Reel size
2.0±0.5
（0.079±0.020）
t
φ13.0±0.5
（φ0.512±0.020）
φD
φd
φ21.0±0.8
（φ0.827±0.031）
R1.0
W
Type
φD
φd
W
t
FBMJ1608
FBMJ2125
FBMJ3216
10.0±1.5
（0.394±0.059）
14.0±1.5
FBMJ4516
（0.551±0.059）
FBMH1608
FBMH2012
FBMH2016
FBMH3216
FBMH3225
FBMH4516
FBMH4525
180＋0/－3
60＋1/－0
2.5max
（7.09＋0/－0.118 ）
（2.36＋0.039/－0 ）
(0.098max)
10.0±1.5
（0.394±0.059）
14.0±1.5
（0.551±0.059）
14.0±2.0
330±2.0
100±1.0
3.0max
FBMH4532
（12.99±0.080）
（3.94±0.039）
（0.551±0.080）
(1.181max)
Unit : mm（inch）
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-E05R01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
■
RELIABILITY DATA
1. Operating Temperature Range
Specified Value
－40℃～＋125℃ （Including
self-generated heat）
Including self-generated heat
Test Methods and
Remarks
2. Storage Temperature Range
Specified Value
－40℃～＋85℃
Test Methods and
Remarks
*Note: －5
to ＋40℃ in
taped packaging
3. Impedance
Specified Value
Within the specified tolerance
Test Methods and
Measuring equipment
: Impedance analyzer (HP4291A) or its equivalent
: 100±1 MHz
Remarks
Measuring frequency
4. DC Resistance
Specified Value
Within the specified range
Test Methods and
Four-terminal method
Remarks
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value
Within the specified range
6. Vibration
Appearance
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
According to JIS C 0040.
Vibration type
: A
Test Methods and
Time
: 2 hrs each in X,Y, and Z directions Total: 6 hrs
Remarks
Frequency range
: 10 to 55 to 10Hz (/min.)
Amplitude
: 1.5 mm (shall not exceed acceleration 196m/s
2
)
: Soldering onto PC board
Mounting method
7. Solderability
Specified Value
90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Solder temperature
Test Methods and
Immersion time
: 230±5℃
: 4±1 sec.
Remarks
Preconditioning
: Immersion into flux.
: 25mm/sec.
Immersion and Removal speed
8. Resistance to Soldering Heat
Appearance
: No significant abnormality
Specified Value
Impedance change
Preheating
Resistance to Soldering Heat
Test Methods and
Duration
: Within ±30% of the initial value
: 150℃
for 3 min.
: 260±5℃
: 10±0.5 sec.
Remarks
Preconditioning
: Immersion into flux.
Immersion and Removal speed
Recovery
: 25mm/sec.
: 2 to 3 hrs of recovery under the standard condition after the test.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_reli_e-E07R01
9. Thermal Shock
Specified Value
Appearance
: No significant abnormality
Impedance change
: Within＋50/－10% of the initial value
According to JIS C 0025.
Conditions for 1 cycle
Step
Temperature (℃)
－40±3℃
Duration (min.)
1
2
3
4
30±3
Within 3
30±3
Room Temperature
85±2℃
Test Methods and
Remarks
Room Temperature
Within 3
Number of cycles
Mounting method
Recovery
: 100
: Soldering onto PC board
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Appearances
Specified Value
: No significant abnormality
Impedance change
: Within ±30% of the initial value
Temperature
: 40±2℃
Humidity
Test Methods and
Duration
: 90 to 95% RH
: 500＋24/－0
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Appearance
Specified Value
No ignificant abnormality
Impedance change
Within ±30% of the initial value
Temperature
Humidity
: 40±2℃
: 90 to 95%RH
Test Methods and
Applied current
: Rated current
Remarks
Duration
: 500＋24/－0 hrs
Mounting method
Recovery
: Soldering onto PC board
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
12. High Temperature Loading Test
Appearance
Specified Value
: No significant abnormality
Impedance change
: Within ±30% of the initial value
Temperature
: 85±2℃
Duration
Test Methods and
Applied current
: 500＋24/－0 hrs
: Rated current
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value
Appearance
Warp
: No mechanical damage.
: 2mm
Testing board
: Glass epoxy-resin substrate
Thickness :
0.8mm
Test Methods and
Remarks
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_reli_e-E07R01
14. Adhesion of Electrode
Specified Value
No separation or indication of separation of electrode.
Applied force
Duration
: 5N
: 10 sec.
Test Methods and
Remarks
Note on standard condition: “standard condition” referred to herein is defined as follows:
5 to 35℃
of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃
of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the “standard condition.”
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_reli_e-E07R01
CHIP BEAD INDUCTORS FOR POWER LINE
（FB SERIES M TYPE）
■
PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products listed in this catalogue are intended for use in general electronic equipment (e.g., AV equipment, OA equipment, home electric
appliances, office equipment, information and communication equipment), general medical equipment, industrial equipment, and automotive
interior applications, etc.
Please be sure to contact TAIYO YUDEN for further information before using the products for any equipment which may directly cause
loss of human life or bodily injury (e.g., specially controlled medical equipment, transportation equipment including, without limitation,
Precautions
automotive powertrain control system, train control system, and ship control system, traffic signal equipment).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g., aerospace equipment,
aviation equipment, nuclear control equipment, undersea equipment, military equipment, etc.).
◆Rated current
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in
case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating
conditions.
2. PCB Design
Precautions
◆Land pattern design
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, etc. sufficiently.
Precautions
◆Preheating when soldering
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron’s temperature – Below 350℃
Duration – 3 seconds or less
The soldering iron should not directly touch the inductor.
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
【Recommended reflow
condition】
Technical
considerations
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_prec_e-E07R01
5. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at
screw part.
Precautions
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
Technical
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・Recommended conditions
Precautions
Ambient temperature -5～40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
hq_chipbeads_prec_e-E07R01
