TDK-MHF1608BAC182ATD25
| Part # | TDK-MHF1608BAC182ATD25 |
Download  | TDK-MHF1608BAC182ATD25 |
E M C
C o m p o n e n t s
Noise suppression filter
Cl
Br
Pb
For MF / HF band noise suppression
MHF series (for automotive)
REACH Halogen
Free
Lead
Free
RoH
S
SVHC-Free
AEC-Q200
MHF1608 type
FEATURES
This noise suppression filter is effective for MF/HF noise suppression.
The High-loss, High-µ ferrite material of the new development is adopted.
Due to
ｔ
he high-attenuation characteristics at frequencies lower than 100MHz, it is highly effective in suppressing noise in the MF/HF
band.
Operating temperature range: –55 to +125°C
Compliant with AEC-Q200
APPLICATION
Car navigation, car audio
(AM/FM radio).
BMS (Battery monitoring system)
Various in-vehicle electronic control units (ECU)
PART NUMBER CONSTRUCTION
MHF
1608
B
AC
352
A
T
D25
L×W×T dimensions
1.6×0.8×0.8 mm
Impedance
(
) at 10MHz
Internal
code
Internal
code
Packaging
style
Series name
Characteristics
Internal code
CHARACTERISTICS SPECIFICATION TABLE
Impedance
DC resistance
Rated current
Part No.
[1MHz]
(
)Typ.
80
220
280
[10MHz]
(
)tolerance
600 25%
1800 25%
2500 25%
3500 25%
[100MHz]
(
)typ.
1200
1800
1800
(
)max.
0.600
1.400
1.600
1.800
(mA)max.
350
250
200
170
380
1600
Measurement equipment
Measurement item
Impedance
DC resistance
Product No.
E4991A+16192A
T
y
pe-7556
Manufacturer
Keysight
T
e
chnologies
Y
o
kogawa
＊
Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20200602
suppression-filter_automotive_mhf1608_en.
E M C
C o m p o n e n t s
MHF1608 type
Z VS. FREQUENCY CHARACTERISTICS
7000
6000
5000
4000
3
000
2000
1000
0
700
600
500
MHF160
8
BAC
3
52ATD25
MHF160
8
BAC252ATD25
MHF160
8
BAC1
8
2ATD25
400
MHF160
8
BAC
3
52ATD25
3
00
MHF160
8
BAC252ATD25
MHF160
8
BAC1
8
2ATD25
200
MHF160
8
BAC601ATD25
100
MHF160
8
BAC601ATD25
0
1
10
100
1000
1
10
100
)
1000
(
)
(
Fre
qu
ency MHz
Fre
qu
ency KHz
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
5
0
MHF160
8
BAC601ATD25
2
MHF160
8
BAC601ATD25
10
15
20
25
3
0
3
5
40
4
MHF160
8
BAC1
8
2ATD25
6
MHF160
8
BAC252ATD25
8
MHF160
8
BAC
3
52ATD25
10
MHF160
8
BAC1
8
2ATD25
MHF160
8
BAC252ATD25
12
14
16
MHF160
8
BAC
3
52ATD25
1
10
100
1000
1
10
100
)
1000
(
)
Fre
qu
ency MHz
(
Fre
qu
ency KHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20200602
suppression-filter_automotive_mhf1608_en.
E M C
C o m p o n e n t s
MHF1608 type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
1.6 0.15
2.0 0.5
1.0
+2.0
–0.0
8.4
ø13 0.2
ø21 0.8
0.3 0.2
14.4max.
Dimensions in mm
ø180 2.0
Dimensions in mm
RECOMMENDED LAND PATTERN
TAPE DIMENSIONS
Sprocket
hole
2.0 0.05
4.0 0.1
+0.1
1.5
–0
0.6
0.8
0.6
Dimensions in mm
A
4.0 0.1
K
Cavity
RECOMMENDED REFLOW PROFILE
Dimensions in mm
T
y
pe
MHF1608
A
B
K
Preheating
Soldering
Natural
cooling
1.1 0.2
1.9 0.2
1.1max.
Peak
250 to 260
°C
160min.
Taping
200min.
230
°C
230
°C
300min.
Drawing direction
180
°C
10s
Dimensions in mm
150
°C
PACKAGE QUANTITY
60 to 120s
30 to 60s
Package quantity
4,000 pcs/reel
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Operating
temperature range
–55 to +125 °C
Storage
temperature range
–55 to +125 °C
Individual
weight
5.2 mg
The storage temperature range is for after the assembl
y
.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20200602
suppression-filter_automotive_mhf1608_en.
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifediv shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equipment,
telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equip-
ment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product
is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications
as general electronic equipment in automotive applications in accordance with the scope and conditions described in this specification,
while the said automotive or general electronic equipment including the said product is intended to be used in the usual operation and
usage methods, respectivel
y
.
O
ther than automotive or automotive products are not designed or warranted to meet the requirements of
the applications listed below, whose performance and/or quality requires a more stringent level of safety or reliabilit
y
,
o
r whose failure,
malfunction or defect could cause serious damage to societ
y
,
p
erson or propert
y
.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications
below or for any other use exceeding the range or conditions set forth in this specification sheet.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(2)
T
r
ansportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7)
T
r
ansportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20200602
suppression-filter_automotive_mhf1608_en.
