TDK-VFS6045VA201
| Part # | TDK-VFS6045VA201 |
Download  | TDK-VFS6045VA201 |
E M C
C o m p o n e n t s
Noise suppression filter
Cl
Br
Pb
For home appliances (conductive noise countermeasure)
VFS series
REACH Halogen
Free
Lead
Free
RoH
S
SVHC-Free
VFS6045 type
FEATURES
A compact noise suppression component for
home appliances that accommodates high currents.
High magnetic shield construction achieved by a ferrite magnetic material and compatible with high-density mounting.
Operating temperature range: –40 to +105°C (including self-temperature rise)
APPLICATION
Refrigerators, air conditioners, washing machines, vacuum cleaners, TV
PART NUMBER CONSTRUCTION
VFS
6045
V
A
031
L×W×H dimensions
6.0×6.0×4.5 mm
Impedance
V: at 10MHz
S: at 1MHz
Series name
Internal code
(
)
CHARACTERISTICS SPECIFICATION TABLE
Type
Impedance
DC resistance
Rated current
Part No.
(
)Typ.
57
145
242
468
1275
188
552
(
)Min.
30
120
200
300
1000
150
450
(
)typ.
0.012
0.019
0.023
0.036
0.075
0.175
0.47
(
)max.
0.0156
0.0247
0.0299
0.0468
0.0975
0.2275
0.611
(A)max.
6.0
5.1
4.95
3.6
2.5
1.5
0.9
0.5
6045VA
[at 10MHz]
6045SA
[at 1MHz]
1232
1000
1.15
1.495
Measurement equipment
Measurement item
Impedance
DC resistance
Product No.
4294A
34420A
Manufacturer
Keysight
T
e
chnologies
Hewlett-Packard
＊
Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(1/4)
20200805
suppression-filter_commercial_vfs6045_en.
E M C
C o m p o n e n t s
VFS6045 type
Z FREQUENCY CHARACTERISTICS
1000000
S
A102
100000
10000
1000
100
S
A151
S
A451
VA102
VA
3
01
VA201
VA121
VA0
3
1
10
1
0.1
0
1
10
100
(
)
Fre
qu
ency MHz
INSERTION LOSS VS. FREQUENCY CHARACTERISTICS
0
VA0
3
1
10
20
3
0
40
50
VA121
VA201
VA
3
01
VA102
S
A151
S
A451
S
A102
60
70
0.1
1
10
100
(
)
Fre
qu
ency MHz
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(2/4)
20200805
suppression-filter_commercial_vfs6045_en.
E M C
C o m p o n e n t s
VFS6045 type
SHAPE & DIMENSIONS
PACKAGING STYLE
REEL DIMENSIONS
2.5 0.1
2.2
(
)
6.0 0.
3
1.7 0.2
2.6
1.7 0.2
4.5m
a
x.
Dimensions in mm
ø13.2 0.5
ø330
13
Dimensions in mm
TAPE DIMENSIONS
Sprocket
hole
RECOMMENDED LAND PATTERN
+0.1
1.5
2.0 0.1
4.0 0.1
0.4
–0
K
A
Cavity
8.0 0.1
1.9
2.
3
1.9
Dimensions in mm
Dimensions in mm
T
y
pe
VFS6045
A
6.3
B
6.3
K
4.7
PACKAGE QUANTITY
RECOMMENDED REFLOW PROFILE
Package quantity
1500 pcs/reel
Preheating
Soldering
Natural
cooling
TEMPERATURE RANGE, INDIVIDUAL WEIGHT
Peak
Operating
temperature range
–40 to +105 °C
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembl
y
.
Storage
temperature range
Individual
weight
0.6 g
250°C
–40 to +105 °C
220
°C
220
°C
180
°C
5s
150
°C
60 to 120s
40s
Time
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(3/4)
20200805
suppression-filter_commercial_vfs6045_en.
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 30°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifediv shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliabilit
y
,
o
r whose failure, malfunction or trouble could cause serious damage to societ
y
,
person or propert
y
.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(2)
T
r
ansportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
ꢀꢀ
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7)
T
r
ansportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
(4/4)
20200805
suppression-filter_commercial_vfs6045_en.
