TE-Connectivity-2-1904011-2
| Part # | TE-Connectivity-2-1904011-2 |
Download  | TE-Connectivity-2-1904011-2 |
Automotive Relays
Plug-in Mini ISO Relays
Power Relay B
■
■
■
Pin assignment similar to ISO 7588 part 1
Plug-in terminals
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
Typical applications
Cross carline up to 35A for example: rear window defogger,
battery
disconnection, power distribution (clamp 15)
F234_fcw1_bw
Contact Data
Contact arrangement
1 A
1 form A,
1 NO
1 A
1 form A,
1 NO
1 C
1 form C,
1 CO
1 C
1 form C,
1 CO
Coil Data
Rated coil voltage
12/24VDC
Rated voltage
12VDC
24VDC
12VDC
24VDC
Coil versions, DC coil
Limiting continuous current
form A/form B (NO/NC)
23°C
Coil
code
Rated
voltage
VDC
12
12
24
Operate
voltage
VDC
8
6.5
16
Release
voltage
VDC
1.5
1
3
Coil
resistance
6)
Ω 10ꢀ
85
Rated coil
power
6)
W
50A
35A
15A
50A
35A
15A
50/35A
35/25A
15/10A
50/35A
35/25A
15/10A
85°C
001
002
004
1.7
1.9
2.3
125°C
75
255
Limiting making current
1)
6) Without components in parallel.
A/B (NO/NC)
Limiting breaking current,
A/B (NO/NC)
120A
30A
120A
20A
120/45A
30/20A
120/45A
20/10A
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Limiting short-time current
Insulation Data
overload current, ISO 8820-3
2)
1.35 x 35A, 1800s
2.00 x 35A, 5s
3.50 x 35A, 0.5s
6.00 x 35A, 0.1s
24VDC for 5min,
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Load dump test
500V
rms
500V
rms
500V
rms
Jump start test, ISO 16750-1
conducting nominal current at 23°C
Silver based
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
V
s
=+86.5VDC
V
s
=+200VDC
Contact material
Min. recommended contact load
3)
Initial voltage drop, at 10A, typ./max.
1A at 5VDC
form A (NO)
form B (NC)
15/200mV 15/200mV
15/200mV 15/200mV
Other Data
–
–
20/250mV 20/250mV
6 ops./min (0.1Hz)
7/2ms
4)
EU RoHS/E
L
V
c
ompliance
Protection to heat and fire according UL94
Ambient temperature
compliant
HB or better
7)
-40 to 125°C
Frequency of operation, at nominal load
Operate/release time typ.
Electrical endurance, ops.
5)
Climatic cycling with condensation,
EN ISO 6988
T
e
mperature cycling,
resistive load, A (NO)
>2.5×10
5
>2.5×10
5
20A,
>2.5×10
5
30A,
>2.5×10
5
20A,
6 cycles, storage 8/16h
30A,
14VDC
28VDC
–
14VDC
>1×10
5
20A,
28VDC
>2.5×10
5
10A,
IEC 60068-2-14, Nb
Damp heat cyclic,
IEC 60068-2-30, Db, Variant 1
Damp heat constant, IEC 60068-2-3, Ca
Category of environmental protection,
IEC 61810
Degree of protection, IEC 60529
Corrosive gas
10 cycles, -40/+85°C (5°C/min)
resistive load, B (NC)
Mechanical endurance
–
6 cycles, upper air temp. 55°C
14VDC
28VDC
56 days
1×10
6
ops.
1) The
values apply to a resistive or inductive load with suitable spark suppression and
at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current
duration of maximum 3s for a make/break ratio of 1:10.
2) Current
and time are compatible with circuit protection by a typical automotive fuse.
Relay will make, carry and break the specified current.
3) See
chapter Diagnostics of Relays in our Application Notes or consult the internet at
4) For
unsuppressed relay coil. Any parallel device to the coil will increase the release time.
RT I – dustproof
IP54
IEC 60068-2-42
IEC 60068-2-43
10 2cm
3
/m
3
SO
2
, 10 days
1 0.3cm
3
/m
3
H
2
S, 10 days
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep)
Shock resistance (functional)
IEC 60068-2-27 (half sine)
Drop test, free fall, IEC 60068-2-32
7) Refers
to used materials.
10 to 500Hz, min. 5g
8)
5) Electrical
endurance data is not valid for diode versions. Any diode or pn-junction
parallel to the coil (internal or external) will significantly decrease the electrical lifetime,
especially when used for inductive loads.
11ms, min. 20g
8)
1m onto concrete
8) No
change in the switching state >10μs. Valid for NC contacts, NO contact values
significantly highe
r
.
1
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay B
(Continued)
Other Data
(continued)
T
e
rminal type
Cover retention
pull force
Accessories
For details see datasheet
plug-in, QC
Connectors for Mini ISO Relays
200N
200N
push force
T
e
rminal retention
pull force
100N
100N
10N
10N
0.3Nm
push force
resistance to bending
9)
force applied to side
9)
torque
Weight
Packaging unit
approx. 35g (1.2oz)
200 pcs.
9) Values
apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
T
e
rminal Assignment
NO
1 form A, NO
NO_2x87
1 form A, 1 NO (2×87)
NOR_2x87
1 form A, 1 NO (2×87) with resistor
NOD_2x87
1 form A, 1 NO (2×87) with diode
85
87 87
85
87 87
85
86
87
30
85
87 87
86
30
86
30
86
30
CO
1 form C, CO
COR
1 form C, CO with resistor
COD
1 form C, CO with diode
85
86
87 87a
85
87 87a
85
87 87a
30
86
30
86
30
2
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay B
(Continued)
Dimensions
Power Relay B with bracket
-1
28,5
87
Shown is
1 form C
87a
30
86
85
1 form A is without terminal 87a
0.5
22
0.2
0.1
5.4
1.7
Measurement
reference plane
0.3
5x
234-b_DD1
Power Relay B without bracket
Measurement
reference plane
0.3
5x
234-nb_DD1
View of the terminals (bottom view)
1 form C
1 form A (2×87)
1 form A is without 87a
0.2
0.2
87
16.8
16.8
87
87
86
87a
30
86
85
85
30
234_VT1
234_VT2
3
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay B
(Continued)
Product code structure
T
y
pical product code
V23234
-A
0
001 -X040
T
y
pe
V23234
Power Relay B
Contact arrangement
A
C
1 form C, 1 CO
1 form A, 1 NO (2×87)
B
1 form A, 1 NO
Cover
Coil
0
Standard
1
Bracket near terminal 30 ISO
12VDC
001
004
12VDC
24VDC
002
T
e
rminal/arrangement
Xnnn
Customized (nnn: version number)
Product code
V23234-A0001-X032
V23234-A0001-X038
V23234-A0001-X040
V23234-A0004-X055
V23234-A0004-X051
V23234-A0004-X053
V23234-A1001-X033
V23234-A1001-X036
V23234-A1001-X041
V23234-A1004-X050
V23234-A1004-X054
V23234-A1004-X094
V23234-B0001-X001
V23234-B0002-X012
V23234-B1001-X004
V23234-B1001-X010
V23234-C0001-X003
V23234-C0001-X006
V23234-C0004-X018
V23234-C0004-X020
V23234-C1001-X005
V23234-C1004-X017
V23234-C1004-X085
Arrangement Cover
Coil supp
r
.
Circuit
1)
COR
COD
Coil Contact
mat.
T
e
rminals
Part number
1-1904020-2
1-1904020-5
4-1904020-7
2-1904025-6
2-1904025-3
2-1904025-5
1-1904022-1
3-1904022-2
2-1904022-3
1-1904027-1
3-1904027-2
4-1904099-3
5-1904006-1
1-1904008-2
1-1904007-1
1-1904007-2
2-1904011-1
2-1904011-2
2-1904015-1
1-1904015-3
5-1904012-1
5-1904014-1
1904015-5
1 form C,
1 CO
Standard Resistor
680Ω
Diode (cathode 86)
12VDC
24VDC
12VDC
24VDC
12VDC
Silver based
Plug-in, QC
CO
Diode (cathode 86)
Resistor 1400Ω
Resistor 680Ω
COD
COR
Bracket
CO
COD
CO
COR
COD
NOR
NO
Diode (cathode 86)
Resistor 1400Ω
Diode (cathode 86)
1 form A,
1 NO
Standard Resistor
680Ω
Bracket
Resistor 680Ω
NOR
NO
1 form A,
1 NO (2×87)
Standard
Diode (cathode 86)
NOD_2x87
NO_2x87
Resistor 1400Ω
NOR_2x87 24VDC
NO_2x87
Bracket
12VDC
24VDC
Resistor 1400Ω
NOR_2x87
1) See terminal assignment diagrams.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
4
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
