TE-Connectivity-7-1393304-1
| Part # | TE-Connectivity-7-1393304-1 |
Download  | TE-Connectivity-7-1393304-1 |
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
■
■
Pin assignment similar to ISO 7588 part 1
Plug-in or PCB terminals
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– 48VDC version on request
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching
or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to
Shrouded Power Relay F4 A and F4
F134co_fcw1
Typical applications
Cross carline up to 40A for example: ABS control, blower fans, car alarm,
cooling fan, Electric Power Steering, energy management, engine control,
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/
supply relay, valves, wiper control.
Contact Data
Contact arrangement
Contact gap
1 form A, 1 NO/1 NO (2×87)
1 form U, 2 NO
1 form C, 1 CO
>0.8mm
24VDC
NO
2x32A
2x25A
2x11A
>0.8mm
24VDC
1)
NO/NC
60/45
40/30A
17/12A
Rated voltage
Limiting continuous current
23°C
12VDC
NO
60A
24VDC
NO
60A
12VDC
NO
2x32A
2x25A
2x11A
24VDC
NO
2x32A
2x25A
2x11A
12VDC
NO/NC
60/45A
40/30A
17/12A
24VDC
NO/NC
60/45A
40/30A
17/12A
85°C
125°C
40A
17A
40A
17A
Limiting making current
2)
NO/NC
120A
60A
120A
20A
2x100A
2x40A
2x100A
2x15A
2x100A
2x30A
120/45A
60/40A
120/45A
20/15A
120/45A
30/20
Limiting breaking current
NO/NC
Limiting short-time current
overload current, ISO 8820-3
3)
:
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
1.35 x 40A, 1800s
2.00 x 40A, 5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s
Jump start test
ISO 16750-1
24VDC for 5min conducting nominal current at 23°C
Contact material
silver based
1A at 5VDC
Min. recommended contact load
4)
Initial voltage drop
NO contact at 10A, typ./max. 15/200mV
15/200mV
NC contact at 10A, typ./max.
Frequency of operation
2×15/200mV
2×15/200mV
2×15/200mV
15/200mV
20/250mV
15/200mV
20/250mV
15/200mV
20/250mV
at nominal load
Operate/release time typ.
6 ops./min (0.1Hz)
7/2ms
5)
Electrical endurance
6)
resistive load, NO contact
>2×10
5
ops. >1×10
5
ops.
>2×10
5
ops.
>1×10
5
ops.
>1×10
5
ops. >2×10
5
ops. >1×10
5
ops. >1×10
5
ops.
40A, 14VDC
20A, 28VDC
2x25A, 14VDC
2x15A, 28VDC
2x20A, 28VDC
40A, 14VDC
20A, 28 VDC
30A, 28 VDC
resistive load, NC contact
>5×10
5
ops.
10A, 28 VDC
Mechanical endurance
DC coil
1) Special
high performance 24VDC version with contact gap >0.8mm.
>1×10
6
ops.
2) The
values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of
maximum 3s for a make/break ratio of 1:10.
3) Current
and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.
4) See
chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For
unsuppressed relay coil. Any parallel device to the coil will increase the release time.
6) Electrical
endurance data is not valid for diode versions. Any diode or pn-junction parallel to the coil (internal or external) will significantly decrease the electrical lifetime, especially when
used for inductive loads.
1
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
(Continued)
Max. load DC breaking capacity
Insulation Data
Initial dielectric strength
between open contacts
500V
rms
500V
rms
500V
rms
between contact and coil
between adjacent contacts
Load dump test
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
Vs=+86.5VDC
Vs=+200VDC
Other Data
EU RoHS/E
L
V
c
ompliance
Ambient temperature DC coil
Protection to heat and fire
Climatic cycling with condensation
EN ISO 6988
compliant
-40 to +125°C
UL94-HB or better
8)
6 cycles, storage 8/16h
10 cycles, -40/+85°C (5°C/min)
6 cycles, upper air temp. 55°C
56 days
T
e
mperature cycling
IEC 60068-2-14, Nb
Damp heat cyclic
IEC 60068-2-30, Db, Variant 1
Damp heat constant
IEC 60068-2-3, Ca
Category of environmental protection,
IEC 61810
Load limit curve 1: arc extinguishes during transit time (CO contact).
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
Load limit curves measured with low inductive resistors verified for 1000 switching events.
RTI – dustproof
IP54 (dustproof)
Degree of protection, IEC 60529
Corrosive gas
IEC 60068-2-42
10 2cm
3
/m
3
SO
2
, 10 days
1 0.3cm
3
/m
3
H
2
S, 10 days
Coil Data
IEC 60068-2-43
Rated coil voltage
12/24VDC
Vibration resistance (functional)
IEC 60068-2-6 (sine sweep)
Shock resistance (functional)
IEC 60068-2-27 (half sine)
Drop test, free fall
IEC 60068-2-32
T
e
rminal type
Cover retention
pull force
push force
10 to 500Hz > 5g
9)
11ms >20g
9)
Coil versions, DC coil
Coil
code
Rated
voltage
VDC
12
24
24
Operate
voltage
VDC
7.2
14.4
16
Release
voltage
VDC
1.6
3.2
4
Coil
resistance
7)
Ω 10ꢀ
90
Rated coil
power
7)
W
1m onto concrete
plug-in, QC/PCB
052
053
056
165
1.6
1.8
2.1
2.0
324
268
288
150N
200N
24
14.4
2.4
All figures are given for coil without pre-energization, at ambient temperature +23°C.
7) Without components in parallel.
T
e
rminal retention
pull force
push force
100N
100N
10N
10N
Coil operating range
resistance to bending, force applied to front
10)
resistance to bending, force applied to side
10)
torque
TE0701-J1
0.3Nm
Weight
approx. 35g (1.2oz)
Packaging unit
plug-in/PCB
plug-in with bracket
0
8) Refers to used materials.
315 pcs.
200 pcs.
0
9) No change in the switching state >10μs. Valid for NC contacts, NO contact values
significantly highe
r
.
10) Values apply 2mm from the end of the terminal. When the force is removed, the
terminal must not have moved by more than 0.3mm.
Accessories
For details see datasheet Connectors for Mini ISO Relays
Does not take into account the temperature rise due to the contact current E=pre-
energization..
2
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
(Continued)
T
e
rminal Assignment
NOR
NOR_SD
NO_2x87
NO
NOR_2x87
1 form A, 1 NO
with resistor
1 form A, 1 NO
with resistor & serial diode
1 form A, 1 NO (2×87)
1 form A, 1 NO
1 form A, 1 NO (2×87)
with resistor
85
87
30
85
87 87
85
87 87
85
87
30
86
86
30
86
30
86
DNOR
CO
COR
COD
DNO
1 form U, 2 NO
with resistor
1 form C, 1 CO
1 form C, 1 CO
with resistor
1 form C, 1 CO
with diode
1 form U, 2 NO
85
87 87b
85
87 87a
85
87 87a
85
87 87b
85
87 87a
86
30
86
30
86
30
86
30
86
30
Dimensions
View of the terminals (bottom view)
Power Relay F4 with quick connect (QC) terminals
Measurement
reference plane
5x
0.3
TE1088-R1
For the make contact (2×87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
TE1093-S1
Power Relay F4 with PCB terminals
View of the terminals (bottom view)
Mounting hole layout (bottom view)
4.5 ±±.ꢀ
2.7 ±±.5
17.9 ±±.25
8.± ±±.25
,
16.9 ±±.ꢀ
TE0907-B1
TE1655-H1
8.4 ±±.25
For the make contact (2×87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
TE1654-91
3
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
(Continued)
Product code structure
T
y
pical product code
V23134
-A
0
052 -C643
T
y
pe
V23134
Power Relay F4
Contact
arrangement
A
B
1 form C, 1 CO
1 form A, 1 NO
C
M
1 form A, 1 NO (2×87)
1 form U, 2 NO
Cover
Coil
0
2
Standard
Bracket at terminal 86 ISO
1
Bracket at terminal 30 ISO
052
056
12VDC
053
24VDC
165
24VDC (contact gap >0.8mm)
24VDC (contact gap >0.8mm)
T
e
rminal/arrangement
C642
Plug-in/NO
G242
PCB/NO
C643
Plug-in/CO
G243
PCB/CO
Xnnn
Customized (nnn: version number)
Production in Europe
(only)
Product code
Arrangement Version
Coil suppr.
Circuit
1)
Coil Contact
mat.
T
e
rminals
Part number
2-1393302-2
2-1393302-3
4-1393302-1
5-1393302-1
5-1393302-2
1-1414167-0
1-1414168-0
5-1393302-8
6-1393302-0
6-1393302-3
6-1393302-4
7-1393302-5
7-1393302-7
1-1414099-0
4-1414992-3
1393303-9
1-1393303-0
3-1393303-4
3-1393303-7
3-1393303-8
3-1393303-9
4-1393303-4
4-1393303-7
4-1393303-8
5-1393303-0
5-1393304-6
5-1393304-7
6-1393304-7
6-1393304-8
3-1904117-6
7-1393304-1
7-1393304-4
V23134-A0052-C643
V23134-A0052-G243
V23134-A0052-X278
V23134-A0053-C643
V23134-A0053-G243
V23134-A0056-X432
2)
V23134-A0056-X433
2)
V23134-A1052-C643
V23134-A1052-X294
4)
V23134-A1053-C643
V23134-A1053-X295
4)
V23134-B0052-C642
V23134-B0052-G242
V23134-B0052-X270
6)
V23134-B0052-X506
V23134-B0053-C642
V23134-B0053-G242
V23134-B1052-C642
V23134-B1053-C642
V23134-B1053-X296
4)
V23134-C0052-C642
V23134-C0053-C642
V23134-C1052-C642
V23134-C1052-X280
4)5)
V23134-C1053-C642
V23134-M0052-C642
V23134-M0052-G242
V23134-M0053-C642
V23134-M0053-G242
V23134-M0165-X539
2)
V23134-M1052-C642
V23134-M1053-C642
1 form C, 1 CO
Standard
CO
12VDC
Silver based
Plug-in, QC
PCB
R 560Ω
COR
CO
Plug-in, QC
24VDC
PCB
Plug-in, QC
D (cathode 86)
R 1200Ω
COD
COR
CO
Bracket
12VDC
24VDC
12VDC
R 560Ω
COR
CO
R 1200Ω
COR
NO
1 form A, 1 NO
Standard
PCB
R 680Ω
R 560Ω
NOR
NOR_SD
3)
NO
Plug-in, QC
24VDC
PCB
Bracket
12VDC
24VDC
Plug-in, QC
R 1200Ω
R 560Ω
NOR
NO_2x87
1 form A, 1 NO (2×87)
Standard
Bracket
12VDC
24VDC
12VDC
NOR_2x87
NO_2x87
DNO
24VDC
1 form U, 2 NO
Standard
Plug-in, QC
PCB
24VDC
Plug-in, QC
PCB
R 1200Ω
DNOR
Plug-in, QC
Plug-in, QC
Bracket
12VDC
24VDC
1) See terminal assignment diagrams.
2) Special feature: contact gap >0.8mm.
3) Serial diode.
4) No hole in terminal 30.
5) No hole in terminal 87a.
6) No holes in all terminals.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
Production in Asia
(only)
Product code
Arrangement Version Coil
suppr. Circuit
1)
Coil Contact
mat.
T
e
rminals
Part number
7-1904094-0
7-1904094-1
7-1904094-5
V23134-B0052-C642
V23134-B0052-X270
2)
V23134-B0053-C642
1 form A, 1 NO
Standard
NO
NOR
NO
12VDC
Silver based
Plug-in, QC
R 680Ω
24VDC
1) See terminal assignment diagrams.
2) No holes in all terminals.
Other types on request.
This list represents the most common types and does not show all variants covered by this datasheet.
4
11-2018, Rev. 1118
© 2018 TE Connectivity.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
