TE-Connectivity-V23134J1052D642

Automotive Relays  

Plug-in Maxi ISO Relays  

Power Relay F7  

■

■

Pin assignment similar to ISO 7588 part 1  

Customized versions on request  

– 24VDC versions with contact gap >0.8mm  

– Integrated components (e.g. resistor, diode)  

– Customized marking/color  

– Special covers (e.g. notches, release features, brackets)  

Typical applications  

Cross carline up to 70A for example: ABS control, cooling fan, energy  

management, engine control, glow plug, heated front screen, ignition,  

lamps: front, rear, fog light, main switch/supply relay.  

F134J_a_bw  

Contact Data  

Contact Data

(continued)  

Contact arrangement  

1 form A,  

1 NO  

–

1 form A,  

1 NO  

–

1 form A,  

1 NO  

Mechanical endurance  

>1×10

6

ops.  

1) Special

 

high performance 24VDC version with contact gap >0.8mm.  

2) The

 

values apply to a resistive or inductive load with suitable spark suppression and  

at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current  

duration of maximum 3s for a make/break ratio of 1:10.  

3) Current

 

and time are compatible with circuit protection by a typical automotive fuse.  

Relay will make, carry and break the specified current.  

4) See

 

chapter Diagnostics of Relays in our Application Notes or consult the internet at  

5) For

 

unsuppressed relay coil. Any parallel device to the coil will increase the release time.  

Contact gap  

Rated voltage  

Limiting continuous current  

23°C  

85°C  

>0.8mm  

12VDC  

24VDC  

24VDC

1)  

70A  

50A  

30A  

240A  

70A  

70A  

50A  

30A  

240A  

25A  

70A  

50A  

30A  

240A  

40A  

125°C  

Limiting making current

2)  

Limiting breaking current  

Limiting short-time current  

overload current, ISO 8820-3

3)  

6) Electrical

 

endurance data is not valid for diode versions. Any diode or pn-junction  

parallel to the coil (internal or external) will significantly decrease the electrical lifetime,  

especially when used for inductive loads.  

1.35 x 50A, 1800s  

2.00 x 50A, 5s  

3.50 x 50A, 0.5s  

6.00 x 50A, 0.2s  

24VDC for 5min,  

Coil Data  

Rated coil voltage  

12VDC, 24VDC  

Jump start test, ISO 16750-1  

conducting nominal current at 23°C  

Silver based  

Coil versions, DC coil  

Coil  

code  

Contact material  

Rated  

voltage  

VDC  

12  

24  

24  

Operate  

voltage  

VDC  

7.2  

14.4  

16.0  

14.4  

16.0  

Release  

Coil  

resistance

7)  

Ω 10ꢀ  

90  

Rated coil  

power

7)  

W

Min. recommended contact load

4)  

Initial voltage drop,  

1A at 5VDC  

voltage  

VDC  

1.6  

form A (NO) contact at 10A, typ./max.  

Frequency of operation at nominal load  

Operate/release time typ.  

10/300mV  

6 ops./min (0.1Hz)  

7/2ms

5)  

052  

053  

056  

065  

165  

1.6  

1.8  

2.1  

2.0  

3.2  

4.0  

2.4  

4.0  

324  

268  

288  

288  

Electrical endurance

6)  

24  

24  

resistive load at 14VDC  

>1×10

5

ops.  

–

–

–

2.0  

7) Without components in parallel.  

All figures are given for coil without pre-energization, at ambient temperature +23°C.  

70A  

>2×10

5

ops.  

–

50A  

–

resistive load at 28VDC  

>1×10

5

ops. >1×10

5

ops.  

25A 40A  

Max. DC load breaking capacity  

Coil operating range  

TEVF4_OVR1  

ECR0629-N  

Load limit curve: safe shutdown, no stationary arc/make contact.  

Load limit curve measured with low inductive resistors verified for 1000 switching events.  

Does not take into account the temperature rise due to the contact current  

E = pre-energization.  

1

03-2020, Rev.0320  

© 2020TE Connectivity.  

Catalog and product specification according  

to IEC 61810-1 and to be used only together  

with the ‘Definitions’ section.  

Catalog and product data is subject to the  

terms of the disclaimer and all chapters of  

the ‘Definitions’ section, available at  

Catalog, product data, ‘Definitions’ section,  

application notes and all specifications are  

subject to change.  

Automotive Relays  

Plug-in Maxi ISO Relays  

Power Relay F7

(Continued)  

Insulation Data  

Other Data

(continued)  

Initial dielectric strength  

between open contacts  

between contact and coil  

between adjacent contacts  

Load dump test  

Shock resistance (functional)  

IEC 60068-2-27 (half sine)  

Drop test, free fall  

IEC 60068-2-32  

T

e

rminal type  

500V

rms  

500V

rms  

500V

rms  

6ms, min. 30g.

9)  

1m onto concrete  

plug-in, QC/ PCB  

ISO 7637-1 (12VDC), test pulse 5  

ISO 7637-2 (24VDC), test pulse 5  

V

s

=+86.5VDC  

V

s

=+200VDC  

Cover retention  

pull force  

push force  

150N  

200N  

T

e

rminal retention  

pull force  

push force  

resistance to bending  

force applied to side  

torque  

Other Data  

150N  

150N  

EU RoHS/E

L

V

c

ompliance  

Protection to heat and fire according UL-94  

Ambient temperature  

compliant  

HB or better

8)  

-40 to 125°C  

10N

10)  

10N

10)  

0.3Nm  

approx. 38g (1.3oz)  

Climatic cycling with condensation  

EN ISO 6988  

6 cycles, storage 8/16h  

Weight  

T

e

mperature cycling,  

IEC 60068-2-14, Nb  

Damp heat cyclic,  

Resistance to soldering heat

 

THT  

IEC 60068-2-20  

Packaging unit  

plug-in:  

plug-in with bracket:  

PCB  

0

8) Refers to used materials.  

0

9) No change in the switching state >10μs. Valid for NC contacts, NO contact values  

significantly highe

r

.  

10) Values apply 2mm from the end of the terminal. When the force is removed, the  

terminal must not have moved by more than 0.3mm.  

10 cycles, -40/+85°C (5°C/min)  

260°C, 10s  

IEC 60068-2-30, Db, Variant 1  

6 cycles, upper air temp. 55°C  

210 pcs.  

208 pcs.  

315 pcs.  

Damp heat constant, IEC 60068-2-3, Ca  

Category of environmental protection,  

IEC 61810  

Degree of protection, IEC 60529  

Corrosive gas  

IEC 60068-2-42  

IEC 60068-2-43  

56 days  

RTI – dustproof  

IP54 (dustproof)  

10 2cm

3

/m

3

SO

2

, 10 days  

1 0.3cm

3

/m

3

H

2

S, 10 days  

Vibration resistance (functional)  

IEC 60068-2-6 (sine sweep)  

10 to 500Hz, min. 5g

8)  

Accessories  

For details see datasheet  

Connectors for Maxi ISO Relays  

T

e

rminal Assignment  

NO  

1 form A, NO  

NOR  

1 form A, NO with resistor  

NOD  

1 form A, NO with diode  

85  

87  

85  

87  

85  

87  

30  

86  

30  

86  

30  

86  

Dimensions  

Power Relay F7 with quick connect terminals similar to ISO 8092-1  

View of the terminals (bottom view)  

2ꢁ.9 0.ꢀ  

1ꢁ 0.1  

6

0.4  

4

0.2  

ꢁ.ꢀ 0.1  

TE1103-411  

2ꢁ.9 0.ꢀ  

16 0.ꢁ  

24.9 0.ꢀ  

Measurement  

reference plane  

4x  

0.ꢀ  

11 0.ꢁ  

17 +1/-0.ꢁ  

ø 1.7 +0.2  

6.ꢀ 0.1  

0.8 0.0ꢁ  

1.2 0.0ꢁ  

9.ꢁ 0.1  

2

03-2020, Rev. 0320  

© 2020 TE Connectivity.  

Catalog and product specification according  

to IEC 61810-1 and to be used only together  

with the ‘Definitions’ section.  

Catalog and product data is subject to the  

terms of the disclaimer and all chapters of  

the ‘Definitions’ section, available at  

Catalog product data, ‘Definitions’ section,  

application notes and all specifications are  

subject to change.  

Automotive Relays  

Plug-in Maxi ISO Relays  

Power Relay F7

(Continued)  

Dimensions

(continued)  

Power Relay F7 with PCB terminals  

View of the terminals (bottom view)  

Mounting hole layout (bottom view)  

3.8  

3.8  

26.2 MAX.  

26.2 MAX.  

6x Ø

 

2.18  

30  

17.9  

8.4  

25.2 MAX.  

85  

86  

2.7  

87  

3.8  

3.0  

2x Ø

 

1.93  

8.5  

3.8  

1.5  

17.0  

TE2104-H1  

TE2105-Q2  

TIN PLATED  

3.8  

Product code structure  

T

y

pical product code

 

V23134  

-J  

0

052 -D642  

T

y

pe  

V23134

Power Relay F  

Contact arrangement  

J

1 form A, 1 NO  

Cover  

Coil  

0

2

Standard  

Bracket near terminal 86 ISO  

1

Bracket at terminal 30 ISO  

052  

165  

12VDC  

24VDC  

053  

065  

24VDC  

24VDC  

056

24VDC  

T

e

rminal/arrangement  

D642

Plug-in/NO  

Xnnn

Customized (nnn: version number)  

Production in Europe

(only)  

Product code  

Arrangement Cover  

Coil supp

r

.  

Circuit

1)  

NO  

NOR  

NOD  

NOR  

NO  

Coil Contact

 

mat.

T

e

rminals Part

 

number  

V23134-J0052-D642  

V23134-J0052-X429  

V23134-J0052-X439  

V23134-J0052-X455  

V23134-J0052-X511  

V23134-J0052-X461

3)  

V23134-J0053-D642  

V23134-J0065-X497

4)  

V23134-J0165-X537

2)3)  

V23134-J1052-D642  

V23134-J1052-X281  

V23134-J1053-D642  

V23134-J2165-X538

2)3)  

1 form A, 1 NO  

Standard  

12VDC  

Silver based  

Plug-in, QC  

7-1393303-3  

1-1414147-0  

1-1414286-0  

1-1414610-0  

3-1415001-2  

1-1414469-0  

9-1393303-7  

3-1414937-3  

3-1904117-4  

0-1393304-9  

1-1393304-0  

1-1393304-1  

3-1904117-5  

Resistor 680Ω  

Diode (cathode 86)  

Resistor 470Ω  

PCB  

Resistor 560Ω  

NOR  

NO  

Plug-in, QC  

24VDC  

PCB  

Plug-in, QC  

Resistor 1200Ω  

Resistor 560Ω  

Resistor 1200Ω  

NOR  

NO  

NOR  

NO  

Bracket  

12VDC  

24VDC  

NOR  

1) See terminal assignment diagrams.  

2) Special feature: contact gap >0.8mm.  

Other types on request.  

3) Special feature: 14.5mm load terminals.  

4) Packed in tray with 300 pcs. per unit.  

This list represents the most common types and does not show all variants covered by this datasheet.  

Production in Asia

(only)  

Product code  

V23134-J0052-D642  

V23134-J0052-X429  

V23134-J0052-X439  

V23134-J0052-X461

3)  

V23134-J0053-D642  

V23134-J0056-X408

2)3)  

Arrangement Cover  

Coil supp

r

.  

Circuit

1)

Coil  

Contact mat.

 

T

e

rminals Part

 

number  

1 form A, 1 NO  

Standard  

NO  

NOR  

NOD  

NOR  

NO  

12VDC  

Silver based  

Plug-in, QC  

7-1904094-7  

7-1904094-8  

7-1904094-9  

8-1904094-0  

8-1904094-3  

8-1904094-4  

Resistor 680Ω  

Diode (cathode 86)  

Resistor 560Ω  

24VDC  

Resistor 1200Ω  

3) Special feature: 14.5mm load terminals.  

NOR  

1) See terminal assignment diagrams.  

2) Special feature: contact gap >0.8mm.  

Other types on request.  

This list represents the most common types and does not show all variants covered by this datasheet.  

3

03-2020, Rev.0320  

© 2020TE Connectivity.  

Catalog and product specification according  

to IEC 61810-1 and to be used only together  

with the ‘Definitions’ section.  

Catalog and product data is subject to the  

terms of the disclaimer and all chapters of  

the ‘Definitions’ section, available at  

Catalog, product data, ‘Definitions’ section,  

application notes and all specifications are  

subject to change.