TOSHIBA-TBD62083AFWG-Z-EHZ
| Part # | TOSHIBA-TBD62083AFWG-Z-EHZ |
Download  | TOSHIBA-TBD62083AFWG-Z-EHZ |
TBD62083A series, TBD62084A series
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TBD62083APG, TBD62083AFG, TBD62083AFNG, TBD62083AFWG
TBD62084APG, TBD62084AFG, TBD62084AFNG, TBD62084AFWG
8channel sink type DMOS transistor array
TBD62083APG, TBD62084APG
TB62083A series and TB62084A series
are DMOS transistor
array with 8 circuits. It has a clamp diode for switching
inductive loads built-in in each output. Please be careful
about thermal conditions during use.
Features
P-DIP18-300-2.54-001
•
•
•
8 circuits built-in
High voltage
High current
:
V
OUT
= 50 V (MAX)
:
I
OUT
= 500 mA/ch (MAX)
TBD62083AFG, TBD62084AFG
•
•
•
Input voltage(output on)
Input voltage(output off)
Package
:
TBD62083A series 2.5 V (MIN)
TBD62084A series 7.0 V (MIN)
:
TBD62083A series 0.6 V (MAX)
TBD62084A series 1.0 V (MAX)
:
PG type P-DIP18-300-2.54-001
FG type SOP18-P-375-1.27
FNG type SSOP18-P-225-0.65
FWG type P-SOP18-0812-1.27-001
SOP18-P-375-1.27
TBD62083AFNG, TBD62084AFNG
Pin connection (top view)
SSOP18-P-225-0.65
TBD62083AFWG, TBD62084AFWG
Pin connection may be simplified for explanatory purpose.
P-SOP18-0812-1.27-001
Weight
P-DIP18-300-2.54-001
:
1.3 g (Typ.)
SOP18-P-375-1.27
SSOP18-P-225-0.65
:
0.41 g (Typ.)
:
0.09 g (Typ.)
P-SOP18-0812-1.27-001
:
0.48 g (Typ.)
2016-05-11
1
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Pin explanations
Pin No.
Pin name
Function
Input pin
Input pin
1
2
I1
I2
Input pin
3
I3
Input pin
4
I4
Input pin
5
I5
Input pin
6
I6
Input pin
7
I7
Input pin
8
I8
GND pin
9
GND
COMMON
O8
O7
O6
O5
O4
O3
O2
O1
Common pin
Output pin
Output pin
Output pin
Output pin
Output pin
Output pin
Output pin
Output pin
10
11
12
13
14
15
16
17
18
Equivalent circuit (each driver)
COMMON
Clamp diode
OUTPUT
INPUT
Clamp
Equivalent circuit may be simplified for explanatory purpose.
2016-05-11
2
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Absolute Maximum Ratings (Ta = 25 °C)
Characteristics
Symbol
Rating
Unit
Output voltage
COMMON pin voltage
Output current
V
OUT
V
COM
I
OUT
V
IN
50
−
0.5 to 50
500
V
V
mA/ch
V
Input voltage
−
0.5 to 30
50
Clamp diode reverse voltage
Clamp diode forward current
PG (Note1)
V
R
V
I
F
500
mA
1.47
FG (Note2)
Power
0.96
P
D
W
dissipation
FNG (Note3)
0.96
FWG (Note4)
Operating temperature
Storage temperature
1.31
T
opr
T
stg
−
40 to 85
−
55 to 150
°
C
°
C
Note1
:
Device alone. When
T
a
e
xceeds 25 °C, it is necessary to do the derating with 11.8 mW/°C.
Note2
:
Device alone. When
T
a
e
xceeds 25 °C, it is necessary to do the derating with 7.7 mW/°C.
Note3
:
On PCB (Size
:
50 mm
×
50 mm
×
1.6 mm, Cu area
:
40 %, single-side glass epoxy).
When
T
a
e
xceeds 25 °C, it is necessary to do the derating with 7.7 mW/°C.
Note4
:
On PCB (Size
:
75 mm
×
114 mm
×
1.6 mm, Cu area
:
20 %, single-side glass epoxy).
When
T
a
e
xceeds 25 °C, it is necessary to do the derating with 10.48 mW/°C.
2016-05-11
3
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Operating Ranges (Ta = −40 to 85 °C)
Characteristics
Symbol
Condition
Min Typ. Max
Unit
50
50
Output voltage
V
OUT
V
COM
―
―
―
0
―
―
―
V
V
COMMON pin voltage
400
390
0
1 circuits ON, Ta
=
25
°
C
0
―
Duty
=
10%
t
pw
=
25 ms
PG
(Note1)
8 circuits ON
Ta
=
85
°
C
170
0
―
Duty
=
50%
T
j
=
120
°
C
400
320
0
0
―
―
1 circuits ON, Ta
=
25
°
C
Duty
=
10%
t
pw
=
25 ms
FG
(Note1)
8 circuits ON
Ta
=
85
°
C
T
j
=
120
°
C
140
0
―
Duty
=
50%
Output
current
I
OUT
mA/ch
400
320
0
0
―
―
1 circuits ON, Ta
=
25
°
C
Duty
=
10%
t
pw
=
25 ms
FNG
(Note2)
8 circuits ON
Ta
=
85
°
C
T
j
=
120
°
C
140
0
―
Duty
=
50%
400
370
0
0
―
―
1 circuits ON, Ta
=
25
°
C
Duty
=
10%
t
pw
=
25 ms
FWG
(Note3)
8 circuits ON
Ta
=
85
°
C
T
j
=
120
°
C
160
0
―
Duty
=
50%
TBD62083A
25
25
I
OUT
= 100 mA or upper, V
OUT
= 2 V
2.5
I
OUT
= 100 mA or upper, V
OUT
= 2 V
7.0
―
―
―
―
―
Input
voltage
(Output on)
series
V
IN
V
(ON)
TBD62084A
series
TBD62083A
0.6
1.0
400
I
OUT
= 100
μ
A or less, V
OUT
= 2 V
I
OUT
= 100
μ
A or less, V
OUT
= 2 V
―
0
0
Input
voltage
(Output off)
series
V
IN
(OFF)
V
TBD62084A
series
Clamp diode forward
current
I
F
―
mA
Note1
:
Device alone.
Note2
:
On PCB (Size
:
50 mm
×
50 mm
×
1.6 mm, Cu area
:
40%, single-side glass epoxy).
Note3
:
On PCB (Size
:
75 mm
×
114 mm
×
1.6 mm, Cu area
:
20%, single-side glass epoxy).
2016-05-11
4
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Electrical Characteristics (Ta = 25°C unless otherwise noted)
T
e
st
Circuit
Characteristics
Symbol
I
leak
Condition
Min
Typ. Max
Unit
V
OUT
= 50V, Ta = 85
°
C
V
IN
= 0 V
Output leakage current
1
μ
A
―
―
1.0
0.7
1.14
I
OUT
= 350 mA, V
IN
=5.0V
―
―
―
―
―
―
―
(2.0) (3.25)
0.4 0.65
(2.0) (3.25)
TBD62083A
series
I
OUT
= 200 mA, V
IN
=5.0V
I
OUT
= 100 mA, V
IN
=5.0V
I
OUT
= 350 mA, V
IN
=7.0V
I
OUT
= 200 mA, V
IN
=7.0V
I
OUT
= 100 mA, V
IN
=7.0V
V
IN
= 2.5 V
Output
voltage
0.2 0.325
(2.0) (3.25)
V
DS
V
2
(Output
ON-resistan
ce)
(
Ω
)
(R
ON
)
0.7
1.14
(2.0) (3.25)
0.4 0.65
(2.0) (3.25)
TBD62084A
series
0.2 0.325
(2.0) (3.25)
TBD62083A
―
0.1
Input
current
(Output on)
series
I
IN (ON)
I
IN (OFF)
V
IN (ON)
3
4
5
mA
μ
A
V
TBD62084A
series
V
IN
= 7.0 V
―
―
―
―
―
―
0.5
1.0
2.5
V
IN
= 0 V, Ta = 85
°
C
Input current(Output off)
TBD62083A
Input
voltage
series
I
OUT
= 100 mA, V
OUT
= 2 V
TBD62084A
series
(Output on)
―
―
7.0
Clamp diode
reverse current
Clamp diode
forward voltage
6
7
V
R
= 50 V, Ta = 85
°
C
μ
A
―
―
―
―
1.0
2.0
I
R
V
F
I
F
= 350 mA
V
Turn−on delay
t
ON
V
OUT
= 50 V
―
―
0.4
0.8
―
―
8
μ
s
R
L
= 125
Ω
Turn−off delay
t
OFF
C
L
= 15 pF
2016-05-11
5
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Test circuit
1. I
leak
2. V
DS
(R
ON
)
COMMON
COMMON
OUTPUT
OUTPUT
INPUT
INPUT
I
leak
I
OUT
V
OUT
V
IN
V
DS
GND
GND
R
ON
= V
DS
/ I
OUT
3. I
IN (ON)
4. I
IN (OFF)
COMMON
OUTPUT
COMMON
OUTPUT
INPUT
I
IN(ON)
V
IN
INPUT
I
IN(OFF)
GND
GND
5. V
IN (ON)
6. I
R
COMMON
COMMON
I
R
V
R
OUTPUT
INPUT
INPUT
I
OUT
V
OUT
OUTPUT
V
IN(ON)
GND
GND
7. V
F
COMMON
I
F
INPUT
V
F
OUTPUT
GND
Test circuit may be simplified for explanatory purpose.
2016-05-11
6
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
8. t
ON
, t
OFF
(Note 1)
(Note 2)
Note 1
:
Pulse width 50
μ
s, Duty cycle 10%
Output impedance 50
Ω
, t
r
≤
5 ns, t
f
≤
10 ns
Please refer to the following table for the VIH condition.
Product
V
IH
TBD62083A series
5.0 V
7.0 V
TBD62084A series
Note 2
:
C
L
includes the probe and the test board capacitance.
Test circuit and timing chart may be simplified for explanatory purpose.
Precautions for Using
This IC does not include built-in protection circuits for excess current or overvoltage.
If this IC is subjected to excess current or overvoltage, it may be destroyed.
Hence, the utmost care must be taken when systems which incorporate this IC are designed.
Utmost care is necessary in the design of the output line, COMMON and GND line since IC may be
destroyed due to short−circuit between outputs, air contamination fault, or fault by improper grounding.
2016-05-11
7
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Package Dimensions
P-DIP18-300-2.54-001
Unit
:
mm
Weight
:
1.3 g (Typ.)
SOP18-P-375-1.27
Unit
:
mm
Weight
:
0.41 g (Typ.)
2016-05-11
8
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
SSOP18-P-225-0.65
Unit
:
mm
Weight
:
0.09 g (Typ.)
P-SOP18-0812-1.27-001
Unit
:
mm
Weight
:
0.48 g (Typ
.
)
2016-05-11
9
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
Notes on Contents
1. Pin
connection
Pin connection may be simplified for explanatory purpose.
2. Equivalent
Circuits
Equivalent circuit may be simplified for explanatory purpose.
3. Test
circuit
Test circuit may be simplified for explanatory purpose.
4. Timing
chart
Timing charts may be simplified for explanatory purposes.
IC Usage Considerations
Notes on handling of ICs
(1) The absolute maximum ratings of a semiconductor device are a set of ratings that must not be exceeded, even for
a moment. Do not exceed any of these ratings.Exceeding the rating(s) may cause device breakdown, damage or
deterioration, and may result in injury by explosion or combustion.
(2) Do not insert devices in the wrong orientation or incorrectly.Make sure that the positive and negative terminals
of power supplies are connected properly.Otherwise, the current or power consumption may exceed the absolute
maximum rating, and exceeding the rating(s) may cause device breakdown, damage or deterioration, and may
result in injury by explosion or combustion.In addition, do not use any device inserted in the wrong orientation
or incorrectly to which current is applied even just once.
(3) Use an appropriate power supply fuse to ensure that a large current does not continuously flow in the case of
overcurrent and/or IC failure. The IC will fully break down when used under conditions that exceed its absolute
maximum ratings, when the wiring is routed improperly or when an abnormal pulse noise occurs from the
wiring or load, causing a large current to continuously flow and the breakdown can lead to smoke or ignition. To
minimize the effects of the flow of a large current in the case of breakdown, appropriate settings, such as fuse
capacity, fusing time and insertion circuit location, are required.
(4) If your design includes an inductive load such as a motor coil, incorporate a protection circuit into the design to
prevent device malfunction or breakdown caused by the current resulting from the inrush current at power ON
or the negative current resulting from the back electromotive force at power OFF. IC breakdown may cause
injury, smoke or ignition.Use a stable power supply with ICs with built-in protection functions. If the power
supply is unstable, the protection function may not operate, causing IC breakdown. IC breakdown may cause
injury, smoke or ignition.
(5) Carefully select external components (such as inputs and negative feedback capacitors) and load components
(such as speakers), for example, power amp and regulator.If there is a large amount of leakage current such as
from input or negative feedback condenser, the IC output DC voltage will increase. If this output voltage is
connected to a speaker with low input withstand voltage, overcurrent or IC failure may cause smoke or ignition.
(The overcurrent may cause smoke or ignition from the IC itself.) In particular, please pay attention when using
a Bridge Tied Load (BTL) connection-type IC that inputs output DC voltage to a speaker directly.
Points to remember on handling of ICs
Heat Radiation Design
When using an IC with large current flow such as power amp, regulator or driver, design the device so that heat is
appropriately radiated, in order not to exceed the specified junction temperature (TJ) at any time or under any condition.
These ICs generate heat even during normal use. An inadequate IC heat radiation design can lead to decrease in IC life,
deterioration of IC characteristics or IC breakdown. In addition, when designing the device, take into consideration the
effect of IC heat radiation with peripheral components.
Back-EMF
When a motor rotates in the reverse direction,stops or slows abruptly, current flows back to the motor’s power supply
owing to the effect of back-EMF. If the current sink capability of the power supply is small, the device’s motor power
supply and output pins might be exposed to conditions beyond theabsolute maximum ratings. To avoid this problem, take
the effect of back-EMF into consideration in system design.
2016-05-11
10
©2016
T
o
shiba Corporation
TBD62083A series, TBD62084A series
RESTRICTIONS ON PRODUCT USE
•
•
•
T
o
shiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in
this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s
written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury
or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or
incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant
TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product
and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the instructions for the
application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or
applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b)
evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms,
sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and
applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS TH
A
T REQUIRE
EXTRAORDINARI
L
Y
H
IGH LEVELS OF QUALITY AND/OR RELIABILIT
Y
, AND/OR A MALFUNCTION OR FAILURE OF WHICH M
A
Y
CAUSE LOSS OF HUMAN LIFE, BODI
L
Y
I
NJUR
Y
,
S
ERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
(
“
UNINTENDED USE
“
).
Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields.
IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUC
T
.
For details, please contact your TOSHIBA
sales representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMEN
T
,
E
XCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUC
T
,
A
ND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WH
A
T
SOEVER,
INCLUDING WITHOUT LIMITATION, INDIREC
T
,
C
ONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF D
A
TA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUC
T
,
OR INFORM
A
T
ION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILIT
Y
,
F
ITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORM
A
T
ION, OR NONINFRINGEMEN
T
.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology
products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws
and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive.
TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
2016-05-11
11
©2016
T
o
shiba Corporation
