Walsin-Tech-Corp-RFDIP1607CLM6T39
| Part # | Walsin-Tech-Corp-RFDIP1607CLM6T39 |
Download  | Walsin-Tech-Corp-RFDIP1607CLM6T39 |
Approval sheet
RFDIP Series – 1608(0603) – RoHS Compliance
MULTILAYER CERAMIC DIPLEXER
Halogens Free Product
2400 ~ 2500 / 5150 ~ 7125 MHz Working Frequency
P/N: RFDIP1607CLM6T39
*Contents in this sheet are subject to change without prior notice.
Page 1 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
FEATURES
1.
2.
3.
4.
Miniature footprint: 1.6 X 0.8 X 0.7 mm
3
Low Insertion Loss
High attenuation on harmonic suppressed
LTCC process
APPLICATIONS
1.
2400 ~ 2500 / 5150 ~ 7125 MHz working frequency
CONSTRUCTION
Top View
P6
P5
P4
PIN
P1
P2
P3
P4
P5
P6
Connection
High Band
GND
Low Band
GND
Common Port
GND
P1
P2
P3
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
W
T
1.60 ± 0.10
Top view
0.80 ± 0.10
0.7 max.
Side view
Side view
A
B
C
D
0.35 ± 0.05
0.22 ± 0.05
0.225 ± 0.05
0.22 ± 0.05
Bottom view
Page 2 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
ELECTRICAL CHARACTERISTICS
RFDIP1607CLM6T39
Specification
Frequency range
2400~2500 MHz
1.14 dB typ.
5150~7125 MHz
Insertion Loss
1.27 dB typ. @ 5150~5950 MHz
1.75 dB typ. @ 5950~7125 MHz
55.7 dB typ. @ 824~849 MHz
47.2 dB typ. @ 1164~1600 MHz
47.2 dB typ. @ 1601~2400 MHz
52.9 dB typ. @ 2400~2500 MHz
46.8 dB typ. @ 2501~3299 MHz
31.1 dB typ. @ 3300~4200 MHz
1.5 dB typ. @ 4400~4800 MHz
7.5 dB typ. @ 7680~8000 MHz
26.2 dB typ. @ 8288~9400 MHz
30.2 dB typ. @ 9400~14250 MHz
26.7 dB typ. @ 14700~21375 MHz
(at +25
C)
17.6 dB typ. @ 1164~1300 MHz
22.8 dB typ. @ 1559~1601 MHz
23.1 dB typ. @ 3600~4000 MHz
31.7 dB typ. @ 4800~7100 MHz
28.8 dB typ. @ 7200~7500 MHz
42.9 dB typ. @ 9600~10000 MHz
Attenuation
50.7 dB typ. @ 2400~2500 MHz
32.2 dB typ. @ 4800~7100 MHz
11.5 dB typ. @ 5150~5950 MHz
11.5 dB typ. @ 5950~7125 MHz
Isolation
Return loss
14.6 dB typ.
Impedance
50 Ω
Power Capacity
3.0W max.
Moisture sensitivity
levels
MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)
Pass 1KV on all pins (Base on AEC-Q200-002)
Pass 200V (Base on EIA/JESD22-A115)
HBM ESD
MM ESD
Operating & Storage Condition (Component)
Operation Temperature Range: -40 ~ +85
℃
Storage Temperature Range: -40 ~ +85
℃
Storage Condition before Soldering (Included packaging marerial)
Storage Temperature Range: +5 ~ +40
℃
Humidity: 30 to 70% relative humidity
TYPICAL ELECTRICAL PERFORMANCE
Page 3 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
LAND PATTERN
Figure
Unit : mm
Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 4 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
RELIABILITY TEST
Test condition / Test method
Test item
Specification
Solderability
At least 95% of a surface of each terminal
*Solder bath temperature
：
235
5
C
JIS C 0050-4.6
JESD22-B102D
electrode must be covered by fresh solder.
*Immersion time
：
2
0.5 sec
Solder
：
Sn3Ag0.5Cu for lead-free
Resistance to soldering
heat
*Preheating temperature
：
120~150
C,
1 minute.
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
JIS C 0050-5.4
*Solder temperature
：
270
5
C
*Immersion time
：
10
1 sec
Solder
：
Sn3Ag0.5Cu for lead-free
Loss of metallization on the edges of each
electrode shall not exceed 25%.
Measurement to be made after keeping at
room temperature for 24
2 hrs
Drop Test
*Height
：
75 cm
No mechanical damage.
JIS C 0044
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
*Test Surface
：
Rigid surface of concrete or
Customer’s specification.
steel.
*Times
：
6 surfaces for each units
；
2 times
for each side.
Vibration
*Frequency
：
10Hz~55Hz~10Hz(1min)
*Total amplitude
：
1.5mm
No mechanical damage.
JIS C 0040
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
*Test times
：
6hrs.(Two hrs each in three
mutually perpendicular directions)
Adhesive Strength
of Termination
*Pressurizing force
：
No remarkable damage or removal of the
termination.
5N (LGA terminal series)
；
5N(
≦
0603)
；
10N(>0603)
JIS C 0051- 7.4.3
*Test time
：
10±1 sec
Bending test
The middle part of substrate shall be
pressurized by means of the pressurizing rod
at a rate of about 1 mm/s per second until the
deflection becomes 1mm/s and then pressure
shall be maintained for 5
1 sec.
No mechanical damage.
JIS C 0051- 7.4.1
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
Measurement to be made after keeping at
room temperature for 24
2 hours
Page 5 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
Temperature cycle
JIS C 0025
1. 30
3 minutes at -40
C
3
C,
2. 10~15
minutes at room temperature,
3. 30
3 minutes at +85
C
3
C,
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
4. 10~15
minutes at room temperature,
Total 100 continuous cycles
Measurement to be made after keeping at
room temperature for 24
2 hrs
High temperature
JIS C 0021
*Temperature
：
85
C
2
C
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
*Test duration
：
1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 24
2 hrs
Humidity
*Humidity
：
90% to 95% R.H.
*Temperature
：
40
2
C
*Time
：
1000+24/-0 hrs.
No mechanical damage.
(steady conditions)
JIS C 0022
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
Measurement to be made after keeping at
room temperature for 24
2 hrs
※
500hrs measuring the first data then
1000hrs data
Low temperature
JIS C 0020
*Temperature
：
-40
C
2
C
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -40 ~
85°C.
*Test duration
：
1000+24/-0 hours
Measurement to be made after keeping at
room temperature for 24
2 hrs
Page 6 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2,
This product could sustain by reflow process three times, and the temperature below 260
℃
.
Fig 2. Infrared soldering profile
ORDERING CODE
RF
DIP
1607
C
L
M6T39
Specification
Design code
Walsin
RF device
Product Code
DIP :Diplexer
Dimension code
Pin Define
Design code
Application
L :
Per 2 digits of Length, Width,
Thickness :
2400~2500 MHz /
5150~7125 MHz
e.g. :
16 =
Length 1.6 mm,
Width 0.8 mm,
07 =
Thickness 0.7 mm
Minimum Ordering Quantity:
4000 pcs per reel.
PACKAGING
Paper Tape specifications
(unit :mm)
Index
Ao
0.975
0.10
E
Bo
T
W
D
Dimension (mm)
Index
1.76
0.10
F
1.55
0.05
Po
0.75
0.10
P1
8.00
0.10
P2
Dimension (mm)
1.75
0.10
3.50
0.05
4.00
0.10
4.00
0.10
2.00
0.05
Page 7 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Φ
178.0
Φ
60.0
Φ
13.0
Dimension (mm)
Taping Quantity: 4
000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft
equipment
(2) Aerospace
equipment
(3) Undersea
equipment
(4) Medical
equipment
(5) Disaster
prevention / crime prevention equipment
(6) Traffic
signal equipment
(7) Transportation
equipment (vehicles, trains, ships, etc.)
(8) Applications
of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products
should be used in 6 months from the day of WALSIN outgoing inspection.
(2) Storage
environment condition.
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: +5 to +40
℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Ch
lorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
Products should be storage on the palette for the prevention of the influence from humidity, dust and so on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 8 of 8
ASC_ RFDIP1607CLM6T39_V01
Apr. 2022
