Wurth-Elektronik-782851212
| Part # | Wurth-Elektronik-782851212 |
Download  | Wurth-Elektronik-782851212 |
Dimensions: [mm]
Recommended Land Pattern: [mm]
Electrical Properties:
Properties
Test conditions
100 MHz
Value
2000
2000
400
Unit Tol.
Impedance @ 100 MHz
Maximum Impedance
Rated Current
DC Resistance
Type
Z
Z
max
I
R
Ω
Ω
2ꢀ5
typ.
100 MHz
W
ΔT = 20 K
@ 20 °C
mA max.
max.
1,2
R
DC
0.42
Ω
High Speed
Certification:
RoHS Approval
0,5 ± 0,3
2,0 ± 0,2
Compliant [2011/6ꢀ/EU&201ꢀ/863]
Conform or declared [(EC)1907/2006]
Conform [JEDEC JS709B]
Conform [IEC 61249-2-21]
AEC-Q200 Grade 1
WIDE BAND / HIGH SPEED:
W = 3,0
REACh Approval
Halogen Free
HIGH CURRENT:
W = 4,0
Halogen Free
Scale – 10:1
Component Qualification
Automotive Approval
Released
Schematic:
General Information:
Do not use this part constantly beyond the Rated Current, as this will create excessive heat and can
harm the component
Ambient Temperature (referring
to I
R
)
-ꢀꢀ up to +10ꢀ °C
Z
F
Operating Temperature
-ꢀꢀ up to +12ꢀ °C
< 40
°C ; <
7ꢀ 5
RH
1
Storage Conditions (in original
packaging)
Moisture Sensitivity Level (MSL)
T
e
st conditions of Electrical Properties: +20 °C, 33 5 RH if not specified differently
Scale – 10:1
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
080ꢀ
eiSos
Valid
1/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Typical Impedance Characteristics:
DC bias current:
10000
10000
1000
100
10
1000
100
10
1
1
1
1
10
100
1000
10
100
1000
Frequency [MHz]
Frequency [MHz]
Z @ 100mA
Z @ 200mA
Z @ 400mA
Z
XL
R
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
080ꢀ
eiSos
Valid
2/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Derating Curve:
120%
100%
80%
60%
40%
20%
0%
0
20
40
60
80
100
120
140
Temperature [°C]
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
080ꢀ
eiSos
Valid
3/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification – Tape: [mm]
Packaging Specification – Reel: [mm]
D0
P0
P2
T
A
W3
W1
close to center
B
bottom cover
tape
C
W2
A0
P1
T1
A
T1
Carrier tape
End
Feeding direction
Start
detail B
Cover tape
B
Top
Cover Tape
Chip Cavity
Sprocket Hole
Embossment
Bottom
Cover Tape
No Component
min. 160 mm
Components
No Component
min. 100 mm
Cover Tape
min. 400mm
packaging is reffered to the international standard IEC 60286-3:2013
A
B
C
D
N
W1
W2
W3
W3
Material
(mm)
2,0
178
(mm)
(mm)
(mm)
(mm)
min.
ꢀ0
(mm)
(mm)
(mm)
(mm)
max.
A0
B0
typ.
2,24
W
T
ref.
1,04
T1
max.
0,10
P0
0,1
4,00
P1
0,1
4,00
P2
+0,0ꢀ
2,00
D0
+0,1 / -0,0
1,ꢀ0
E1
0,1
1,7ꢀ
E2
min.
6,2ꢀ
F
Tape type 1a
Packaging unit
pcs.
4000
min.
1.ꢀ
min.
12.8
min.
20.2
+1,ꢀ
8.4
max.
14.4
min.
7.9
tolerance
value
typ.
1,42
+0,3/ -0,1
8,00
0,0ꢀ
3,ꢀ0
10.9
Polystyrene
Polystyrene
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
165° –
180°
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
Pull-of force
080ꢀ
eiSos
Valid
4/7
8 mm
Tape width
0,1 N – 1,0 N
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Value
T
s min
T
s max
t
s
Preheat Temperature Min
Preheat Temperature Max
Preheat Time t
s
from T
s min
to T
s max
Ramp-up Rate (T
L
to T
P
)
1ꢀ0 °C
200 °C
T
p
60 – 120 seconds
3 °C/ second max.
217 °C
T
C
–5°C
t
p
Max. Ramp Up Rate
Max. Ramp Down Rate
T
L
t
L
Liquidous Temperature
Time t
L
maintained above T
L
60 – 1ꢀ0 seconds
T
p
≤ T
c
, see
T
a
ble below
T
L
t
L
T
p
Peak package body temperature
T
s max
Preheat Area
Time within 5°C of actual peak
temperature
t
p
20 – 30 seconds
Ramp-down Rate (T
P
to T
L
)
Time 25°C to peak temperature
refer to IPC/ JEDEC J-STD-020E
6 °C/ second max.
8 minutes max.
T
s min
t
S
Package Classification Reflow Temperature (T
c
):
Volume mm³
Volume mm³
350-2000
Volume mm³
>2000
Properties
<350
25
PB-Free Assembly | Package Thickness
Time 25°C to Peak
260 °C
260 °C
2ꢀ0 °C
24ꢀ °C
220 °C
220 °C
260 °C
24ꢀ °C
24ꢀ °C
< 1.6 mm
Time
PB-Free Assembly | Package Thickness
260 °C
1.6 mm – 2.5 mm
PB-Free Assembly | Package Thickness
> 2.5 mm
2ꢀ0 °C
Sn-PB Assembly | Package Thickness < 2.5
mm
23ꢀ °C
Sn-PB Assembly | Package Thickness ≥ 2.5
mm
220 °C
refer to IPC/ JEDEC J-STD-020E
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
080ꢀ
eiSos
Valid
ꢀ/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
Storage Conditions:
Cautions and Warnings:
•
A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer
degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of
shipment.
Do not expose the components to direct sunlight.
The storage conditions in the original packaging are defined according to DIN EN 61760-2.
The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components.
The following conditions apply to all goods within the product series of WE-CBA of Würth
Elektronik eiSos GmbH & Co. KG:
•
•
•
General:
•
•
This electronic component is designed and manufactured for use in general electronic equipment.
Packaging:
Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any
equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control,
ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are
especially required and/or if there is the possibility of direct damage or human injury.
•
The packaging specifications apply only to purchase orders comprising whole packaging units. If the ordered quantity exceeds or is
lower than the specified packaging unit, packaging in accordance with the packaging specifications cannot be ensured.
•
•
Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.
The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions
specified in the datasheet are not met, the component may be damaged or dissolved.
Handling:
•
•
Do not drop or impact the components, the component may be damaged
•
•
Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.
Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth
Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and
sustainability over time.
The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the
authority of the customer. All technical specifications for standard products also apply to customer specific products.
The temperature rise of the component must be taken into consideration. The operating temperature is comprised of ambient
temperature and temperature rise of the component.The operating temperature of the component shall not exceed the maximum
temperature specified.
•
These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.
However, no responsibility is assumed for inaccuracies or incompleteness.
Product specific:
Soldering:
•
•
The solder profile must comply with the technical product specifications. All other profiles will void the warranty. Wave soldering is
allowed for components bigger than 080ꢀ after evaluation and approval.
All other soldering methods are at the customers’ own risk.
Cleaning and Washing:
•
Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire
insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product.
Potting:
•
If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking
could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the components. We recommend a
manual inspection after potting to avoid these effects.
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
080ꢀ
eiSos
Valid
6/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
6. Product Life Cycle
Important Notes
Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a
standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage
about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be
available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product
availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not
apply in the case of individual agreements deviating from the foregoing for customer-specific products.
The following conditions apply to all goods within the product range of Würth Elektronik
eiSos GmbH & Co. KG:
1. General Customer Responsibility
Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain
application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the
areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The
responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this
fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product
characteristics described in the product specification is valid and suitable for the respective customer application or not.
7. Property Rights
All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as
well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth
Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or
implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination,
application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.
2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications
8. General Terms and Conditions
It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime
cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.
In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable
design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic
component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General
T
e
rms and Conditions of Würth
3. Best Care and Attention
Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.
4. Customer Support for Product Specifications
Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve
specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales
person in charge should be contacted who will be happy to support in this matter.
5. Product R&D
Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the
Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries
regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the
customer as per Section 1 and 2 remains unaffected.
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
PROJECTION
METHOD
AGa
002.000
2021-01-11
DIN ISO 2768-1m
DESCRIPTION
WE-CBA SMT EMI Suppression
Ferrite Bead
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
T
e
l. +49 (0) 79 42 94ꢀ – 0
ORDER CODE
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
080ꢀ
eiSos
Valid
7/7
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety
must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.
