ZETTLER-AZ2280-1C-24AEF
| Part # | ZETTLER-AZ2280-1C-24AEF |
Download  | ZETTLER-AZ2280-1C-24AEF |
AZ2280
4
0 AMP MINIATURE
POWER RELAY
FEATURES
•
Quick-connect leads for contacts and coil
•
1 Form A, B and C contacts available
•
AC and DC coils available
•
Epoxy sealed IP67 approved versions available
•
UL Class F (155°C) standard
•
UL, CUR file E44211
•
VDE 40049064 ( DC coil only )
GENERAL DATA
CONTACTS
Minimum operations
1 x 10
7
1 x 10
5
at 28A, 277VAC Res. [N.O.]
Life Expectancy
Mechanical
Electrical
Arrangement
SPST (1 Form A, or B)
SPDT (1 Form C)
15ms at nominal coil voltage
Operate Time
(max.)
Release Time
(max.)
Ratings
Resistive load:
Max. switched power: 840W or 11,080VA
Max. switched current: 40A (Form A),
15A (Form B), 20A (Form C)
10ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1500 Vrms contact to contact
Max. switched voltage: 277VAC, 28VDC
(at sea level for 1 min.)
2500 Vrms contact to coil
UL, CUR
1 Form A
40A at 277VAC, General Use [1][2]
28A at 277VAC, General Use, 100k cycles [1]
2Hp at 250VAC [1][2]
Insulation Resistance
1000 megohms min. at 500 VDC, 20°C
50% RH
1HP at 125VAC [1][2]
30A at 28VDC [1]
Dropout
DC
:
G
reater than 10
%
o
f nominal coil voltage
AC: Greater than 20
%
o
f nominal coi
l
v
oltage
20/60 (FLA/LRA) at 277VAC 30k cycles [1]
At nominal coil voltage
Ambient Temperature
Operating
1 Form B
15A at 277VAC, General Use [1]
10A at 28VDC [1]
0.5HP at 250VAC [1]
0.25HP at 125VAC [1]
10/33 (FLA/LRA) at 277VAC 30k cycles [1]
-55°C (-67°F) to 85°C (185°F),
-55°C (-67°F) to 60°C (140°F),
-55°C (-67°F) to 155°C (311°F)
[DC]
[AC]
Storage
Vibration
0.062″ DA at 10–55 Hz
10 g
Shock
1 Form C
30/20A (N.O./N.C.) at 277VAC, General Use [1][2]
20/10A (N.O./N.C.) at 28VDC[1]
2/0.5HP (N.O./N.C.) at 250VAC[1][2]
1/0.25HP (N.O./N.C.) at 125VAC[1][2]
20/60 (FLA/LRA) at 277VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277VAC 30k cycles N.C. [1]
Enclosure
Terminals
P
.
B.T. polyester
Tinned copper alloy, Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
VDE
Contact factory for ratings
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
270°C (518°F)
5 seconds
Material
Silver cadmium oxide [1], silver tin oxide [2]
Resistance
< 50 milliohms initially
80°C (176°F)
(24V, 1A voltage drop method)
Max. Immersion Time
30 seconds
COIL
36 grams
Weight
(approx.)
Power
At Pickup Voltage
(typical)
DC: 500mW
AC: 1.4VA
NOTES
Max. Continuous
Dissipation
DC: 1.7W at 20°C (68°F)
AC: 2.7VA at 20°C (68°F)
1. All
values at 20°C (68°F).
Temperature Rise
Temperature
38°C (68°F)
2. Relay
may pull in with less than “Must Operate” value.
3. Specifications
subject to change without notice.
Max. 155°C (311°F)
6
/
9
/
2
2
AZ2280
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Must Operate
VDC
Nominal Coil
VDC
Max. Continuous
VDC
Nominal Current
mA 10ꢀ
Coil Resistance
10ꢀ
ORDER NUMBER*
5
6
3.75
4.50
6.4
7.8
185
150
93
27
40
AZ2280–1A–5DF
AZ2280–1A–6DF
AZ2280–1A–9DF
AZ2280–1A–12DF
AZ2280–1A–15DF
AZ2280–1A–18DF
AZ2280–1A–24DF
AZ2280–1A–48DF
AZ2280-1A-110DF
9
6.75
12.2
15.4
19.8
24.1
32.0
62.6
146.6
97
12
15
18
24
48
110
9.00
77
155
11.25
13.5
59
256
47
380
18.00
36.00
82.5
36
660
19
2560
13450
8.2
COIL SPECIFICATIONS – AC Coil
50/60 Hz
Must Operate
VAC
Nominal Coil
VAC
Max. Continuous
VAC
Nominal Coil
Power VA
Coil Resistance
10ꢀ
ORDER NUMBER*
12
10.2
20.4
13.8
27.6
2.3
25
100
AZ2280–1A–12AF
AZ2280–1A–24AF
AZ2280–1A–120AF
AZ2280–1A–208AF
AZ2280–1A–240AF
AZ2280–1A–277AF
24
2.1
120
102.0
176.8
187.0
235.4
138.0
239.0
276.0
318.5
2.3
2,500
11,000
13,490
15,000
208
2.2
220/240
277
2.2/2.6
2.2
*Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively.
For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “-
1C.” Add “T” to “-1A”, “-1AE”, “-1B”, “-1C” or “-1CE” for extended life contacts.
Substitute “DEF” or “AEF” in place of “DF” or “AF” for epoxy sealed version IP67
approved. For
0.110 coil terminals change “F” to “KF.”
MECHANICAL DATA
1.08
(27.5)
0.25 x 0.032
1.09
(27.8)
±0.003
3 places
(6.35 x 0.813)
(±0.08)
3
2
NC
NO
1.27
(32.4)
1.98
(50.2)
1.71
(43.5)
COM
4
0.187 x 0.02*
±0.003
2 places
(4.75 x 0.51)
(±0.08)
1
5
0.14
(3.5)
* “K” = 0.110 x .02
WIRING DIAGRAM (Top View)
3
3
2
2
4
4
4
1
5
1
5
1
5
Form A
Form B
Form C
Dimensions in inches with metric equivalents in parentheses. Tolerance:
± .010″
6
/
9
/
2
2
Th
is
specification provides an overview of the most significant part features. Any
individual applications and operating conditions are not taken into
consideration. It is recommended to test the product
under application
conditions. Responsibility for the application remains with the customer.
Proper operation and service life cannot be guaranteed if the part is
operated outside the specified limits.
