ZETTLER-AZ9403-1C-5DE
| Part # | ZETTLER-AZ9403-1C-5DE |
Download  | ZETTLER-AZ9403-1C-5DE |
AZ940
3
10 AMP MINIATURE
POWER RELAY
FEATURES
•
Class F Insulation Standard
10 Amp switching capability
•
•
4 kV dielectric strength
•
Epoxy sealed version available
•
UL, CUR file E44211
•
VDE certificate 40049971
CONTACTS
Arrangement
SPST (1 Form A)
GENERAL DATA
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10
7
Ratings
Resistive load:
1 x 10
5
at 10 A 2
77
VAC Res.
Max. switched power:
150 W or 2770 VA
Max. switched current:
10 A (N.O.), 3 A (N.C.)
Max. switched voltage: 150 VDC* or 400 VAC
Operate Time (max.)
Release Time (max.)
8 ms at nominal coil voltage
5 ms at nominal coil voltage
(with no coil suppression)
*
Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dielectric Strength
(at sea level for 1 min.)
1000 Vrms between open contacts
4000 Vrms coil to contact
Rated Load
UL
Normally open contact (N.O.)
10 A at 125 VAC, General Use,
80
k cycles
70°C
10 A at 120 VAC, resistive, 80k cycles 70°C
5 A at 2
77
VAC, General Use, 100k cycles
70°C
5 A at 30 VDC, resistive, 100k cycles
70°C
4 A at 120 VAC, resistive,100k cycles
105°C
1 A at 120 VAC, tungsten, 6k cycles
105°C
2.5 FLA / 15 LRA at 120 VAC, 6k cycles
105°C
Normally closed contact (N.C.)
Insulation Resistance
1 x 10
9
ohms minimum at 500 VDC
Dropout
Greater tha
n
5
%
o
f nominal coi
l
v
oltage
Ambient Temperature
At nominal coil voltage
Operating
Storage
-40°C (-40°F) to
90°C (194°F) Class B
-40°C (-40°F) to
110°C (230°F) Class F
-40°C (-40°F) to 130°C (266°F) Class B
3 A at 2
77
VAC general use, 100k cycles
70°C
3 A at 30 VDC resistive, 100k cycles
70°C
-40°C (-40°F) to 155°C (311°F) Class F
Vibration
Shock
0.062″ (1.5 mm) DA at 10–55 Hz
98m/s
2
Functional
Normally open contact (N.O.)
VDE
5A (cosϕ1), 277VAC 100k cycles 70°C
5A (cosϕ1), 277VAC 50k cycles 70°C sensitive Coil
980m/s
2
Destructive
Enclosure
P
.
B.T. polyester
Normally closed contact (N.C.)
3A (cosϕ1), 2
77
VAC general use, 100k cycles
70°C
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
80°C (176°F)
Material
silver tin oxide
Max. Immersion Time
30 seconds
< 100 milliohms initially
(at 6 V, 1 A, voltage drop method)
Weight
7 grams
Resistance
Packing unit in pcs
100 per styrofoam tray / 1000 per cartonbox
COIL
NOTES
Power
At Pickup Voltage
(typical)
409
mW (standard coil)
1
81
mW (sensitive coil)
1. All
values at 20°C (68°F).
2. Relay
may pull in with less than “Must Operate” value.
3. Specifications
subject to change without notice.
Max. Continuous
Dissipation
845mW at 20°C (68°F) ambient (standard)
500mW at 20°C (68°F) ambient (sensitive)
40°C (72°F) at nominal coil voltage
(standard coil)
20°C (36°F) at nominal coil voltage
(sensitive coil)
Temperature Rise
Temperature
Max. 155°C (311°F) Class F
0
8
/28/
23
AZ940
3
RELAY ORDERING DATA
STANDARD COIL
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
Max. Continuous
Coil Resistance
Ohm ± 10
Form A (SPST)
Form C (SPDT)
VDC
VDC
AZ9403-
1C-3D
AZ9403-
1C-5D
AZ9403-
1C-6D
AZ9403-
1C-9D
AZ9403-
1C-12D
AZ9403-
1C-18D
AZ9403-
1C-24D
AZ9403-
1C-
48
D
3
5
2.3
3.8
3.9
6.5
20
55
AZ9403-
1A-3D
AZ9403-
1A-5D
AZ9403-
1A-6D
AZ9403-
1A-9D
AZ9403-
1A-12D
AZ9403-
1A-18D
AZ9403-
1A-24D
AZ9403-
1A-
48
D
6
4.5
7.8
80
9
6.8
11.7
15.6
23.4
31.2
62.4
180
12
18
24
48
9.0
320
13.5
18.0
36
.0
720
1,280
5,120
* Add suffix “E” at the end of order number for sealed version. VDE Rating for 5, 9, 12 ,
24
VDC coil only.
SENSITIVE COIL
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (SPST)
3
5
2.3
3.8
4.5
7.5
45
125
AZ9403-
1A-3DS
AZ9403-
1A-5DS
AZ9403-
1A-6DS
AZ9403-
1A-9DS
AZ9403-
1A-12DS
AZ9403-
1A-18DS
AZ9403-
1A-24DS
6
4.5
9.1
180
9
6.8
13.5
18.0
27.0
36.0
400
12
18
24
9.0
720
13.5
18.0
1,600
2,800
Add suffix “E” at the end of order number for sealed version. VDE Rating for 5, 9, 12 ,
24
VDC coil only.
*
MECHANICAL DATA
PC BOARD LAYOUT
.054
[1.36]
.400
[10.2]
.300
[7.62]
.058
[1.49]
.807
[20.50]
.401
[10.20]
.300
[7.62]
.602
[15.30]
.016
[0.4]
5 x ø
.051
[ø 1.3]
.100
[2.54]
5 x.157
[4.0]
WIRING DIAGRAM
1
5
8
2 x.018±.005
[0.45±0.12]
FORM A
5
2 x.018±.005
[0.45±0.12]
3 x.031±.005
[0.8±0.12]
1
8
3 x.012±.005
[0.31±0.12]
16
10
FORM C
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance:
± .010″
0
8
/28/
23
Th
is
specification provides an overview of the most significant part features. Any
individual applications and operating conditions are not taken into
consideration. It is recommended to test the product
under application
conditions. Responsibility for the application remains with the customer.
Proper operation and service life cannot be guaranteed if the part is
operated outside the specified limits.
