XY-160D Dual Channel DC Motor Driver Module

The XY-160D Dual Channel DC Motor Driver Module is an electronic module designed to control two DC motors simultaneously. It is commonly used in robotics, automation, and various motorized projects where precise control over motor speed and direction is required. The module lets you drive motors forward or reverse and control their speed using Pulse Width Modulation (PWM) signals. It is built to handle higher currents and voltages, making it suitable for driving medium to large-sized DC motors.

Specifications

• The power supply voltage is 6.5v-27v. The power supply must not be reversed or exceed 27V, otherwise the module may burn out. Connecting a 15A fuse in series at the power input is recommended.
• Dual motor interface, the rated output current of each channel is 7A, the peak current is 50A, the motor interface must not be short-circuited, and it is recommended to use a 10A fuse in series.
• The control signal voltage is 3-6.5v, enabling forward and reverse control signals, respectively.
• Enable signal terminal (ENA) input PWM adjustable speed, PWM frequency range 0-10khz, PWM small pulse width 10us.
• Operating temperature -25℃-80℃.
• Product size: 55*16mm (length, width, height).
• Mounting hole diameter: 3mm. When installing, pay attention to prevent short circuits of the back circuit. Insulation pads or copper pillars can be added to raise the circuit board.
• Weight: 20g.